Hehe great @Stone as Emma and after the first tests, I am really glad of the results with the carb hole version. It brings a big settings possibility 
Hello good people!
I have upgraded a "old" stem, and I have to say I really like the result...
What do you think about this?
The mouth piece is in red narra, like the dots. Stem and storage tube are still available.
Here's a custom stem in ash and red narra (with a 8mm glass tube too)
Have a great day !
I have upgraded a "old" stem, and I have to say I really like the result...
What do you think about this?
The mouth piece is in red narra, like the dots. Stem and storage tube are still available.
Here's a custom stem in ash and red narra (with a 8mm glass tube too)
Have a great day !
Diggy Smalls
Notorious
It's beautiful! Love it
This thread is now closed. For an explanation why, please read http://fuckcombustion.com/threads/important-announcement.49260/.
Please try its successor at https://newfuckcombustion.com/index.php?threads/aezhenn-wood.79/. Thanks for the contributions and I hope you enjoy the new home.
Please try its successor at https://newfuckcombustion.com/index.php?threads/aezhenn-wood.79/. Thanks for the contributions and I hope you enjoy the new home.
Hey @Mono Loco Thanks for your words! Glad to see you there in this new home!
Hey guys, I hope you are all fine!
I continue to work on the mouth piece option, and here's the last pieces I have done. I hope you will like them!
Amboyna burl stem with Philippine ebony mouthpiece.
This one is with a carb hole. You just have to turn the mp to adjust his size.
I used a 11mm od glass tube (8mmID) , from Glass Charlie.
Philippine ebony and spalted beech stem, with turquoise inlay and a regular 11mm OD glass tube.
This stem is looking for a new home...
And a last one...
I wish you all a great day!
I continue to work on the mouth piece option, and here's the last pieces I have done. I hope you will like them!
Amboyna burl stem with Philippine ebony mouthpiece.
This one is with a carb hole. You just have to turn the mp to adjust his size.
I used a 11mm od glass tube (8mmID) , from Glass Charlie.
Philippine ebony and spalted beech stem, with turquoise inlay and a regular 11mm OD glass tube.
This stem is looking for a new home...
And a last one...
I wish you all a great day!
letter never sent
reckoner
Hello good people!
@Duba Thanks for your words! if you want to clean the short part between the tip and the glass, I think the best way is to use a q-tip barely soaked in 90° alcohol or iso and gently sweep the crap out.
@letter never sent Yes Sir, all of my glass tubes are coming from Glass Charlie, but I can only propose the spiked tubes with the stems drilled for the 8mm OD tubes.
Like for this one...
![20200617_164511[1].jpg](https://fuckcombustion.com/data/attachments/1/1307-12a8b884e92b74d8c715117a5f48f086.jpg "20200617_164511[1].jpg")
Red Narra with acrylic inlay and Philippine ebony mouth piece
![20200617_164741[1].jpg](https://fuckcombustion.com/data/attachments/1/1308-55eb28a3f3990f271400300651aacf50.jpg "20200617_164741[1].jpg")
This one can work with both
@Duba Thanks for your words! if you want to clean the short part between the tip and the glass, I think the best way is to use a q-tip barely soaked in 90° alcohol or iso and gently sweep the crap out.
@letter never sent Yes Sir, all of my glass tubes are coming from Glass Charlie, but I can only propose the spiked tubes with the stems drilled for the 8mm OD tubes.
Like for this one...
Red Narra with acrylic inlay and Philippine ebony mouth piece
This one can work with both
letter never sent
reckoner
Great @letter never sent , glad to meet you!
Thanks a lot
Thanks a lot
Mono Loco
Well-Known Member
Like it? LOVE. it! A green mouthpiece to coordinate with the leaf artwork would be killer!
I'm more of an all wood fan, though, and would like to see some pyrography left Au Natural without paint, too ... maybe even just some simple stippling texture, or tribal geometric art. ALL your stuff is very appealing and covet-craving!
I'm more of an all wood fan, though, and would like to see some pyrography left Au Natural without paint, too ... maybe even just some simple stippling texture, or tribal geometric art. ALL your stuff is very appealing and covet-craving!
Thanks a lot @Mono Loco
Yes, this kind of mixed technics is opening lot of possibilities... That's so enthusiasmic to look at them!
Yes, this kind of mixed technics is opening lot of possibilities... That's so enthusiasmic to look at them!
letter never sent
reckoner
funkyhomer
Well-Known Member
Wow that new stem with the painted bits is stunning. well done!
MM1968
Member
Landed on my desk this morning from @Aezhenn . Red amboyna burl and philippine ebony with 11mm Glass Charlie inserts which will also accept your Dynavap tip perfectly. All I'm saying is that for less than the cost of an Omni you could buy a Ti tip and cap with one of these made to order one off works of art inculding 2 Glass Charlie inserts (straight and dimpled). If I had my time again I know how I would spend my money from the start.
Looooooooose yourself in that amboyna burl........
@Aezhenn you were an absolute delight to deal with from start to finish to create this custom request stem. Thank you.
Looooooooose yourself in that amboyna burl........
@Aezhenn you were an absolute delight to deal with from start to finish to create this custom request stem. Thank you.
Last edited:
Hello good people!
I hope everyone is fine here and that the summer is running in a pleasant way!
Let me show you this new vc stem with the carb hole system!
This one was a custom order, made from a beautiful curly ash blank, with a kingswood mouth piece...
You just have to turn the mp to adjust the airflow...
What do you think about it?
I hope everyone is fine here and that the summer is running in a pleasant way!
Let me show you this new vc stem with the carb hole system!
This one was a custom order, made from a beautiful curly ash blank, with a kingswood mouth piece...
You just have to turn the mp to adjust the airflow...
What do you think about it?
Hey good people!
I hope everyone is fine !
Here's some new pieces hot from the shop!
Olivewood with a kingswood mouthpiece and turquoise inlay
I really like olivewood, it's a wonderful wood to work with, with his particular smell when turning... For me, it's so linked to the mediterranean world, especially Italia ( I am a huge fan of this country!)
Well with this one, there's summer vibes included!
And it's funny to see how the kingswood answers to the olivewood lines...
Available with a 8mm OD glass tube
Another interesting piece:
Purple narra stem, with amboyna burl and turquoise inlay, mouth piece in amboyna burl... with subtle variants of color on the stem and the mp...
Available with a 11mm OD glass tube.
I switched from 10mm od to 11mm od because the thicker walls bringing a bigger solidity.
But the inner diameter doesnt change, still 8mm. (you can even use directly without wood , with the vc tip fitted inside, but, well, we all like wood, isnt it? )
All my glasses are coming from Glass Charlie
Last piece, like the icing on the cake, look at this carb hole stem, with adjustable airflow...
Red amboyna burl and philllipine ebony, with a touch of turquoise...
The glass tube diameter is 11mm OD too...
All of three are looking for a new home...
I wish you all a great day!
I hope everyone is fine !
Here's some new pieces hot from the shop!
Olivewood with a kingswood mouthpiece and turquoise inlay
I really like olivewood, it's a wonderful wood to work with, with his particular smell when turning... For me, it's so linked to the mediterranean world, especially Italia ( I am a huge fan of this country!)
Well with this one, there's summer vibes included!
And it's funny to see how the kingswood answers to the olivewood lines...
Available with a 8mm OD glass tube
Another interesting piece:
Purple narra stem, with amboyna burl and turquoise inlay, mouth piece in amboyna burl... with subtle variants of color on the stem and the mp...
Available with a 11mm OD glass tube.
I switched from 10mm od to 11mm od because the thicker walls bringing a bigger solidity.
But the inner diameter doesnt change, still 8mm. (you can even use directly without wood , with the vc tip fitted inside, but, well, we all like wood, isnt it?
)All my glasses are coming from Glass Charlie
Last piece, like the icing on the cake, look at this carb hole stem, with adjustable airflow...
Red amboyna burl and philllipine ebony, with a touch of turquoise...
The glass tube diameter is 11mm OD too...
All of three are looking for a new home...
I wish you all a great day!
