TinyMight / TM 2

[TeaCup]

It does, but they're practically non existant. If I look exactly straight down I can't see anything, it has to be tilted slightly to the left or right.

Ok, not true. I unboxed it in my kitchen during the day and that's never how I'm vaping......so I can see it, and can definitely see the little dot telling you what number your on alot better.......but I swear the space between the numbers has got to be smaller, the half marks might as well not even be there, yuck for that.

Also, cleaned and polished up the titanium stem and now it fits in the o-ring better........um, how can that be, lol?!?!?!!

 

[Pappy]

Grav Upline Taster is best tasting, coolest, cleanest stem I've yet tried for TM2. No cooling unit needed. Bought a second for spare.

 

[CloudForestWoodcraft]

In love with my new setup 🪸🫠

 

[UhuM]

Grav Upline Taster is best tasting, coolest, cleanest stem I've yet tried for TM2. No cooling unit needed. Bought a second for spare.

Any comparison to the 3D XL stem? I want a nice stem that cools and I'm eying with the large one, but then the dimensions are a bit big for my taste. The Taster was sold out, when I bought the TM, but it seems like a nice compromise between dimensions and cooling. Does the taster fit the capsule?

 

[Pappy]

Any comparison to the 3D XL stem? I want a nice stem that cools and I'm eying with the large one, but then the dimensions are a bit big for my taste. The Taster was sold out, when I bought the TM, but it seems like a nice compromise between dimensions and cooling. Does the taster fit the capsule?

I find the dimples on the 3D a residue magnet. Nor do I trust basket screens not to come off during removal, dumping ABV into the TM 2 chamber. It's happened to me. The mouthpiece points in a single direction. I like to rotate my tubes. I find the Grav Upline more practical, cooler, cleaner. I like the fact it has a large bowl you don't have to fill. I pack it halfway. It adds to the coolness and vapes effectively. What I like most is it tastes great.

 

[sickmanfraud]

Nor do I trust basket screens not to come off during removal, dumping ABV into the TM 2 chamber

If you use the proper TM basket screen it should not fall off I can say it has never happened to me since I switched to the screens from TM in Finland.

It is a good habit to insert and remove the stem with the vape upside-down even if the screen were to pop off you don't fill your TM chamber with AVB.

 

[Wile.E]

Any comparison to the 3D XL stem? I want a nice stem that cools and I'm eying with the large one, but then the dimensions are a bit big for my taste. The Taster was sold out, when I bought the TM, but it seems like a nice compromise between dimensions and cooling. Does the taster fit the capsule?

Yes,the capsule fits like its made for

 

[bardad]

Hello
so i must also say that grav upline is what i use now....
it is compact, does not create air resistance, practical narrowed mouthpiece, cools sufficiently at a temperature of 3-5.
everything else always seemed unsatisfactory to me.....

 

[staircase slight of hand]

If anyone has a Good Vibes Boro “Elephant” stem (like the one below, second to the right), could you let us know how it compares to other cooling stems? I keep hearing praise for stems like the Grav taster, but I can’t imagine the cooling is anything like what I’m getting from the Elephant. Basically, I’m curious if there are more minimalist stems that can do the same, or if I’ve kinda pigeon-holed myself into the sub-genre of j-hook-esque stems (I was very unimpressed with both the stock glass and titanium stems, with or without cooling unit).

 

[bardad]

I have a nice stem with balls from gvb, it cooled great, but it got clogged up very quickly and increased the already large air resistance, which was born from the grav upline already bigger since production.
what I like about the grav upline is another thing that if I don't clean it for a long time, it has absolutely no effect on the draw.
only it smells more and more and the appearance is not the cleanest.
i once tried to heat up a clogged grav upline with a turbo lighter and draw steam and it was very fragrant and strong......
it is very individual what one prefers.
I need the lightest possible draw, very clean and fragrant vapor, small dimensions, practicality, durability, nice design and quality materials.
I'm not saying that TM2 fulfills it to the max in all points, but I don't have a better one available yet.
I'm on the waiting list for Master Morwood, I'm looking forward to the handiwork, aesthetics, simplicity of his Toad...
THEN WE WILL SEE WHO WILL WIN THIS FIGHT

but I'm a bit of an eternal collector, so maybe it will just be another piece in the collection, maybe that's the joy, from new things and the joy of supporting the production of non-corporate and non-mass products.

 

[Shit Snacks]

If anyone has a Good Vibes Boro “Elephant” stem (like the one below, second to the right), could you let us know how it compares to other cooling stems? I keep hearing praise for stems like the Grav taster, but I can’t imagine the cooling is anything like what I’m getting from the Elephant. Basically, I’m curious if there are more minimalist stems that can do the same, or if I’ve kinda pigeon-holed myself into the sub-genre of j-hook-esque stems (I was very unimpressed with both the stock glass and titanium stems, with or without cooling unit).

Yeah in my experience nothing is going to cool like having a bend in there, with or without balls, I have my U-turn stem from him and it is pretty great, very satisfied since I like to use my TM upside down anyway, it has pearls that help cool as well, airflow is good being one of his most recent designs with the right size balls, perfect cooling for me... My GVB straight stems are also effective with their balls, they have more balls, two different stems, each one is subtly different but they certainly work well enough, though it's hard to want to use anything other than the U-turn stem now? I even have WPA with such great hooks, still tough to beat the triple right angle OGB style as well...

 

[BabyFacedFinster]

but I'm a bit of an eternal collector, so maybe it will just be another piece in the collection, maybe that's the joy, from new things and the joy of supporting the production of non-corporate and non-mass products.

This one has risen to the top for me. At least for flower. It has been awhile now and I haven't given up my platoon of the TM2 for herb and the Core erig for 'trates.

The little bastard gives hits like no other I've used. My former top herb vape was my enano, but I've not run them head to head. I used to say it's unfair to compare a portable to a plug-in, but I'm not so sure with the TM2. The clouds you get on only a 3 with a tiny thimble full of herb is just incredible, and the flavor is tops too. I'm glad I found a way to get the vapor cool without water. The only gripe I could think of is, I wish it had a timer to shut it off if you forget. I can't tell you how many times I've come back the next day and the little light is blinking.

I've been passing on other vapes because I haven't yet thought I could do better in a portable herb device. I will say that I have my eye on a @phattpiggie TA, but you know, Stoners love their toys.

still tough to beat the triple right angle OGB style as well...

Truer words... You know

 

[m0sh]

So I'm made a little guide to in my opinion a great way to use they TM/TM2 out and about.

You'll need all these in your package

This bundle contains:

• Patagonia Unisex's Ultralight Black Hole Mini Hip Pack Backpack - I got it from Amazon, the price seemed to go up.
• 1 XL Stem - You can use the regular one, I just prefer this, but either one works.
• 2X18650 Batteries with a holder case - i recommend getting this specific one, which I got from eBay
• 1 Small Brush for cleaning - can be found in a lot of stores
• 1 Film canister container- I got from AliExpress

The earbuds are not related, but recommended

I wear it like this:

In my opinion, this is the best way to carry the device out and about.
Of course, this might not be possible for some legal reasons, but as long as it's allowed, I think this is the way to go.

I'm sure other pouches would work fine, but this is the one I got, it will fit all of the above and more. I can put more batteries, my phone, and my wallet and it would fit, but I prefer a slim approach with only the relevant stuff.
When I wear it, I don't feel any weight, I take it everywhere with me. I like the detachable strap because it's easy to get tangled with other bags and jackets. Easy to place it on top of everything

When you use this setup, you can safely load your bowl while walking.
The thing that always bothered me with devices like this, is that it's not really that portable if you need to sit down to organize everything.

Pre-grinding your herb and using the sucking method works like a charm and can be done on the fly while the device is still hidden inside.
It just makes using TM so easy everywhere, anytime with less risk IMO.
I have walked the street of Milano and vaped a lot, nobody even noticed.


It's very important you buy a battery holder case with a top lid like the one I got.
There's a lot that opens from the side and it's not good because you can't tell which battery is full and which is empty.
Because of the top lid, I just place my spent battery upside down, so I know for a fact which one is full and which one is empty.

For the container, I recommend something like I've gotten. Pre-grind everything you'll need for the day and have fun!

If I manage to inspire anyone, I did my job

Peace and love!

 

[Shit Snacks]

FYI PSA

have some thrilling news to share regarding the new "FinTwist" cooling mouthpiece for the TinyMight vaporizer. We've made significant progress! After tinkering and fine-tuning to meet all the design guidelines, I'm thrilled to announce that we've successfully 3D printed a functional prototype using high-grade 316 Stainless Steel.

Check out these images of the prototype in all its glory:

https://imgur.com/WYm3Qh5

https://imgur.com/AGM3vrx

Initial tests have shown that the draw restriction is lower than anticipated, which should have a positive impact on physically cooling down the vapor. However, I suspect it might clog up quickly and require cleaning with solvents like ISO alcohol, and possibly even an ultrasonic cleaner.

I'm currently tweaking the fit to ensure it's just right (it's just a smidge too tight for my comfort on my 55mm stem, which has an 11.775mm ID). But here's the exciting part: I'm now accepting pre-orders for anyone who would like to help beta-test and provide feedback. Since these mouthpieces are printed off-site, there will be approximately a 5-week wait for the next batch of inventory (hopefully sooner, as they are also entering their slow season).

If you're interested in pre-ordering, simply add the item to your shopping cart using the following link:
https://delta3dstudios.com/tinymight-fintwist-mouthpiece/


But wait, there's more! This is just the beginning. I've also recently completed a 14mm E-Nano Water Pipe Adapter (compatible with both the original Nano and the NXT) printed in stainless steel, which I'll be unveiling soon.

Furthermore, there's a 55mm stainless steel stealth stem for the TinyMight in the print queue. It features an internal helix twist to help cool the vapor. It has successfully passed manual inspections of the model, and now we're moving on to the printing phase to see how it turns out.

I must say, I'm extremely pleased with the quality of these steel printed parts. It's a delight to bring more products to the market as I become more comfortable with the design restrictions such as wall thicknesses and tolerances. I want to express my deepest gratitude for all the support I've received over the years. My business wouldn't exist without the word-of-mouth referrals from satisfied people around the world sharing their experiences. Customer satisfaction is of utmost importance to me, so please don't hesitate to contact me directly if you have any questions or concerns.

Thank you all once again for your incredible support. Exciting things are on the horizon, and I can't wait to share them with you!

 

[RedZep]

Do any of the artisanal stems have a properly sized ID (internal diameter) yet?

I had one of the pill stems from HighArtisan and hated how none of the screen options fit properly, included the little rimmed basked.

Is it the same for GVB, Rogue glassworks, Azzwood?

 

[Shit Snacks]

Is it the same for GVB, Rogue glassworks

I don't know what you mean by proper sized, GVB includes half inch flat screens that fit his clear stems pretty perfectly resting on spikes... Rogue also sells his own cut basket screens that he's posted a link to here before

 

[RedZep]

I don't know what you mean by proper sized, GVB includes half inch flat screens that fit his clear stems pretty perfectly resting on spikes... Rogue also sells his own cut basket screens that he's posted a link to here before

This is great. Thanks. I don't mind buying custom from the artisan themselves, as long as they fit snug, and don't fall out.

 

[Shit Snacks]

This is great. Thanks. I don't mind buying custom from the artisan themselves, as long as they fit snug, and don't fall out.

Yeah mostly that's the screens and the variance with glass, there is no universal guarantee for anything cross-compatible

 

[BabyFacedFinster]

Yeah mostly that's the screens and the variance with glass, there is no universal guarantee for anything cross-compatible

I got on that MP pre-order yesterday. Hopefully it will fit my GVB stem.

 

[VaPeD&CoNfUsEd]

Is there anything you guys want in a cooling stem that you aren’t getting from any of the aftermarket ones offered out there? My tm stuff is top notch fitment wise and aesthetically but, I don’t really do anything special for cooling.

 

[Varden]

2 days ago I received the TM2 after owning the TM OG for almost two years.

It is noticeably bigger, not sure I like that. I do not mind that it is slightly taller or slightly longer, but it is quite a bit thicker, wider. That makes a difference when trying to carry it in the pocket, like I used to do with the TM OG.

I like that the airpath is better now, main reason I updated and sold the TM to a friend, but the size is a bit too much, having second thoughts honestly. Guess I just need to get used to it.

Plus, not convinced by the lights on top, and if you switch them off they come back on every time you switch the battery. Ideally, I would like to be able to set the lights on top off, the lights on the bottom on and this setting be permanent through battery switching. But honestly, not biggest deal. The size on the other hand...

 

[RedZep]

Is there anything you guys want in a cooling stem that you aren’t getting from any of the aftermarket ones offered out there? My tm stuff is top notch fitment wise and aesthetically but, I don’t really do anything special for cooling.

Yes. I'm really disappointed no one is offering a flattened MP. They give a much more comfortable mouth position, and cut down on pain for people with jaw issues. Also easy to do for the artisan.

I sold my TM2 because all existing stems caused me pain. I'm thinking off buying one again (because it's amazing) and asking for a custom built from someone. Although I'm shocked no one has done it yet anyway.

 

[VaPeD&CoNfUsEd]

Yes. I'm really disappointed no one is offering a flattened MP. They give a much more comfortable mouth position, and cut down on pain for people with jaw issues. Also easy to do for the artisan.

I sold my TM2 because all existing stems caused me pain. I'm thinking off buying one again (because it's amazing) and asking for a custom built from someone. Although I'm shocked no one has done it yet anyway.

I have done flattened mouthpieces for it already. I don’t think the owners have posted them here unfortunately but I have made them.

 

[Wile.E]

Tinymight 2 Vaporisateur : On Demand Full Convection Vaporizer !

Acheter Tinymight 2 Vaporizer pas cher. 0651395428 Achat vaporisateur portable Tinymight 2 avec chauffe par convection, bouffées à la demande au meilleur prix !

www.docteur-vaporisateur.com

They have two different Woods for Tm2 in this Shop.In a few days i Post some pics from the darker one

 

[Vaporific]

Tinymight 2 Vaporisateur : On Demand Full Convection Vaporizer !

Acheter Tinymight 2 Vaporizer pas cher. 0651395428 Achat vaporisateur portable Tinymight 2 avec chauffe par convection, bouffées à la demande au meilleur prix !

www.docteur-vaporisateur.com

They have two different Woods for Tm2 in this Shop.In a few days i Post some pics from the darker one

Still hoping/waiting for RED, i.e. Purplewood. My 3+ year old OG TM continues to rock - every single time! It’s my favorite vape. A flatter mouthpiece would be kinda cool but I’ve been mostly using the standard stock short stem for true portability and being on the go (with a rubber cap). Simplicity - and power and performance - at its best. I use a few 3rd party stems on occasion at home.