Multi-brand Xmax V3Pro vaporizer, convection, on-demand&session.

[PPN]

Something ike this with magnets in the plastic to hold it to the oven,
View attachment 13442
Or this (Boundless went this way when too many ham fisted users would rip the vape off the bong and leave the magnetic version wpa behind leaving a mess),
View attachment 13444

Hi Guys, I'm glad to say the recently released silicone water adapter is only the first wpa released and I got the confirmation they are working on a magnetic water adapter!

I’ve had the V3PRO for a couple of weeks and did a lot of experimentation and modifications to get it to where I like it. I don’t vape much herb lately, using herb as a medium to vape hash and kief. I have always been on a search for the holy grail of the best device that vapes hash and I’ve tried many. My 1st vape was V2Pro which I still use and it wasn’t very good, but got me into water pieces because it was so hot.

‘The V3PRO has advanced very far from the V2Pro and for the money the best low priced vape. It has pretty good taste and is a lot like the HR Rogue, but with smaller bowl. The Rogue is my holy grail for hash next to a Dynavap.

‘I modified mine using silicone adapter from the Starry bubbler adapter with a rubber band to secure it better and placing a Hulu XL nipple stem in the adapter and later with a 14mm wpa also from the Starry old wpa. I also put wide rubber band over the air intake holes so I can adjust air flow which is way too much for my liking. I’ve never used a small device with so much air flow as the sound is the loudest I’ve heard that gets dampened when I restrict with the rubber band. After a couple of knock overs I came up with the Arizer Air stand for it with another rubber band to prevent it from wobbling as the fit is loose in the stand. The Sneaky Pete rubber stand also works very good and stays on the devic where the Air stand remains on the desk and you take it out to use.

Overall a great device especially with the replacement battery so it lasts longer than a built in battery.

View attachment 13473View attachment 13474

Hi @Petetbay thank you so much for all your posting and pictures, you are an X-Max addict, all the family is here!

PPN if you’re out there, where’s the FogPro and why couldn’t they make a wpa for the 3VPro that’s like the new Starry one which rocks instead they’re coming out a silicone sock much like what I made though mine uses a glass joint.

Yes, I'll report your thoughts, although I had the confirmation a magnetic water adapter will be released soon, I'll suggest the full ceramic build.

Can anyone who's tried both compare this to the Rogue? Looks like I can get one shipped from Europe, but I couldn't find a US seller. Can the v3 be ordered directly, perhaps with a group buy (only if that's allowed to mention on FC couldn't find it in the rules) ?

Good news! I will get a link for the ones who want to order directly from us... today or tomorrow I believe!

I have actually made the airflow a bit freer by swapping the disc filter in the CU to a @DDave VapCap Ti screen

Thanks for the comparison!! Looks like we have similar collections...my daily go to is the rogue with mvs stem. So the big question remains for USA enthusiasts: where do we get the v3 pro? Anyone, feel free to DM me the secret recipe for ordering it! Preferably not from international with the word Vape on the package as I want it to arrive

Soon... Look at my other reply to you!

I read in some earlier posts asking about fury2 capsules so I found my fury2 dosing capsule fits perfectly and works pretty good with herb better than I would have thought. I was actually looking for the older full mesh screen ones which I never found, but found my ceramic screens which fit for the mp screen need to try it for awhile.

PPN if you’re out there, where’s the FogPro and why couldn’t they make a wpa for the 3VPro that’s like the new Starry one which rocks instead they’re coming out a silicone sock much like what I made though mine uses a glass joint.

View attachment 13612View attachment 13613

Great mod, full ceramic vaporpath, I like that! About the Fog Pro, I don't represent anymore X-Vape since summer 2020 and VM2 release... although I'm informed the Fog Pro isn't ready for release. If you want me back to monitor X-Vape threads, you can suggest them to take me back

O_O This?! That's so awesome. I did not know this existed and it's pretty much my dream WPA option for the v3Pro. Simple, easy to clean, effective, elegant. [edit: I see you have to use the silicone sleeve with this and sometimes it comes off. So maybe that's not the perfect option either.]

TBF I'm not really rushed to get a wpa since the v3pro cooling mp works so well on it's own. I never get a hot or uncomfortable hit. But I would buy one. I'd also like a silicone sleeve or mouthpiece cover/cap for on the go.

Yes, the Starry's ceramic adapter was released in 2019 or 2020 I don't remenber exactly but it's the most recent released accessorie for the Starry, I'll transmit your suggestion. I agree with you, the V3Pro by itself is so smooth I can't see the purpose of water filtration here... except it's so fun and we like to see vapor. As well I always appreciate to hook a new vape on a water bubbler cause to visualize how the vapor comes (and vapor density) helps me to understand how the vaporizer works.

No not that tight, drop out easy when turning it over.

Much like the Rogue I have never used the stock mp, though I’d say the 3VPro mp cooling looks pretty ingenious and effective. I end up running max temp for hash and sessions can be up to 10 minutes so I try to have enough cooling to reduce heat, the Hulu stem can be very hot to the touch where it connects to the mp so the mp cooling is pretty much overwhelmed at these times.

You are vaping Hasch, nice, do you find it hot enough to get a perfectly vaped Hasch? I tried once the included wax cup and quartz fritted pad but it wasn't producing vapor, just some good taste. Although when I added a dab in a flower load it was another story, big vapor!
You said to mix your hasch with some flowers so it may helps. I think kief is probably working better than bubble hasch, isn't it?
Since you have some Starrys I suppose you already tried to vape bubble hasch on the concentrate pad with? I found the Starry a perfect tool to vape hasch on it's own. Ace works very well also but you need to use hemp fiber and to break your hasch in vapable mini rocks.

Have fun... everybody!!

 

[LesPlenty]

I can't see the purpose of water filtration here

Many like the added moisture that a bong gives...I can get a bit dry on higher temps. I also find I can consume a load faster and get much bigger clouds with the help of a bong for a single rip.
I will be getting a WPA or 2 when they release for sure!

 

[Petetbay]

Hi Guys, I'm glad to say the recently released silicone water adapter is only the first wpa released and I got the confirmation they are working on a magnetic water adapter!

Hi @Petetbay thank you so much for all your posting and pictures, you are an X-Max addict, all the family is here!

Yes, I'll report your thoughts, although I had the confirmation a magnetic water adapter will be released soon, I'll suggest the full ceramic build.

Good news! I will get a link for the ones who want to order directly from us... today or tomorrow I believe!



Soon... Look at my other reply to you!

Great mod, full ceramic vaporpath, I like that! About the Fog Pro, I don't represent anymore X-Vape since summer 2020 and VM2 release... although I'm informed the Fog Pro isn't ready for release. If you want me back to monitor X-Vape threads, you can suggest them to take me back

Yes, the Starry's ceramic adapter was released in 2019 or 2020 I don't remenber exactly but it's the most recent released accessorie for the Starry, I'll transmit your suggestion. I agree with you, the V3Pro by itself is so smooth I can't see the purpose of water filtration here... except it's so fun and we like to see vapor. As well I always appreciate to hook a new vape on a water bubbler cause to visualize how the vapor comes (and vapor density) helps me to understand how the vaporizer works.

You are vaping Hasch, nice, do you find it hot enough to get a perfectly vaped Hasch? I tried once the included wax cup and quartz fritted pad but it wasn't producing vapor, just some good taste. Although when I added a dab in a flower load it was another story, big vapor!
You said to mix your hasch with some flowers so it may helps. I think kief is probably working better than bubble hasch, isn't it?
Since you have some Starrys I suppose you already tried to vape bubble hasch on the concentrate pad with? I found the Starry a perfect tool to vape hasch on it's own. Ace works very well also but you need to use hemp fiber and to break your hasch in vapable mini rocks.

Have fun... everybody!!

What a mouthful you really enjoy your role. Yeah I have vaped a lot hash in the Sterry as the oven goes to 464F, but bowl is too big for just hash. Been smoking hash for about 50 years, still my fav, have most of the best old style hash. When it comes to vaping or even smoking hash the different types of hard/soft, oily/dry, it’s almost like the different types concentrates still always trying to figure out way the best way to consume it. If they can do a makeover on the Starry like they did to the V2Pro for a convection Starry sign me up, just make sure it still goes to 464F and has replaceable batteries like 2 18650. The hash is second to concentrates now for me, herb comes in third, but I mix it up lots with lots of kief thrown in.
‘I thought the Fog was Xmax sorry, you’d think I would know these things. I was hoping the FogPro does a bigger V3PRO with replaceable battery so I don’t have to by another Rogue when it dies.
The wpa isn’t a big issue, for what V3PRO is as a low cost portable that’s actually portable. They did a nice job on the Starry wpa, changed the device completely. You say there’s still hope, nice.

I tried once the included wax cup and quartz fritted pad but it wasn't producing vapor, just some good taste.

That fritter pad was big surprise in the cup, but they don’t work that good. I thought the wax cup was inside joke by the designers.

 

[LesPlenty]

just make sure it still goes to 464F and has replaceable batteries like 2 18650

You need to check out the X-Max Ace...it has a boost temp mode for concentrates and one of the most satisfying 18650 quick-swap battery setups I have come across (John Wick style),

X-Max Ace Vaporizer by TopGreen

You cannot go too big with battery capacity (the vape will only draw what it needs), just never smaller than recommended (especially the stated minimum amp draw required) Thanks for clearing that up. I thought that might be true but it's always nice to get confirmation from someone else. :)...

fuckcombustion.com

I am glad you can get to higher temps with the Ace because I like to vape my rosin dabber hemp fiber wiper in the Ace every couple of weeks once it is saturated.

 

[Petetbay]

You need to check out the X-Max Ace

I have one and it cost me an extra 5 day wait for my V3PRO. When I ordered the V3PRO I ordered a Ace mouthpiece as well and the person filling got mixed up and sent a Ace instead of the V3PRO with the Ace mp and had to wait and sent back the Ace when I got V3Pro. Duh The Ace is ok, but has mp problems and tall bowl, needs bowl reduction, that where I grabbed the ceramic screen from.

And where the hell you find hemp fiber been looking for ages, I use unbleached cotton for ejuice coils to line the top and bottom of the bowls for hash.

 

[LesPlenty]

And where the hell you find hemp fiber been looking for ages

Dynavap...a few years back, it takes me a while to fill that tall Ace concentrate can...a long multi heat session for sure!
Back on topic...I am finding the wire mesh that I put in the V3Pro CU stays a lot cleaner than the OG disc filter, a good cheap upgrade that allows one to rip a little harder if that is your thing.

 

[maremaresing]

So glad to hear the are working on a revised WPA!

Ordered up a Starry Ceramic WPA/mp to give it a try, along with some POTV one dosing caps for the Pro! Very excited to try both when they arrive.

 

[1nd3cEnt]

Sneaky Pete, on his Instagram feed today, is showing the v3Pro, but the v3Pro is not on Pete's website right now. The PACT act strikes again?

 

[PPN]

What a mouthful you really enjoy your role. Yeah I have vaped a lot hash in the Sterry as the oven goes to 464F, but bowl is too big for just hash. Been smoking hash for about 50 years, still my fav, have most of the best old style hash. When it comes to vaping or even smoking hash the different types of hard/soft, oily/dry, it’s almost like the different types concentrates still always trying to figure out way the best way to consume it. If they can do a makeover on the Starry like they did to the V2Pro for a convection Starry sign me up, just make sure it still goes to 464F and has replaceable batteries like 2 18650. The hash is second to concentrates now for me, herb comes in third, but I mix it up lots with lots of kief thrown in.
‘I thought the Fog was Xmax sorry, you’d think I would know these things. I was hoping the FogPro does a bigger V3PRO with replaceable battery so I don’t have to by another Rogue when it dies.
The wpa isn’t a big issue, for what V3PRO is as a low cost portable that’s actually portable. They did a nice job on the Starry wpa, changed the device completely. You say there’s still hope, nice.


That fritter pad was big surprise in the cup, but they don’t work that good. I thought the wax cup was inside joke by the designers.

Yes, hasch vaping is the BIG challenge, some peoples appreciate the Starry cause the large oven is making stirring easier and stirring is necessary with bubble hasch using no filler like coton or hemp fibers, except if you are loading pretty small amount (+ coton/hemp fibers). Although, here in Europe, where peoples smoke a lot of hasch, a hasch based device will do the trick! I agree with @LesPlenty about the Ace, it handles concentrates very well!

And where the hell you find hemp fiber been looking for ages, I use unbleached cotton for ejuice coils to line the top and bottom of the bowls for hash.

I suppose the unbleached cotton for ejuice works well and don't carry that nasty taste you have in the cotton found in every shop (even bio and unflavoured) but, from my understanding, hemps fibers are costless, I got a big pack for a few bucks only in the LCV french retailer's online shop! Too bad it's not easy to get in the US since DynaVap doesn't sell that item anymore, although you can probably find a supplier somewhere... good luck!

 

[kokolokokolokon]

I read in some earlier posts asking about fury2 capsules so I found my fury2 dosing capsule fits perfectly and works pretty good with herb better than I would have thought. I was actually looking for the older full mesh screen ones which I never found, but found my ceramic screens which fit for the mp screen need to try it for awhile.

PPN if you’re out there, where’s the FogPro and why couldn’t they make a wpa for the 3VPro that’s like the new Starry one which rocks instead they’re coming out a silicone sock much like what I made though mine uses a glass joint.

View attachment 13612View attachment 13613

after a some days...would you say fury/potv one/fenix mini caps are worth it?
is it easier to keep the mp and oven clean?
how about performance?

Edited: Have someone tries the fury2 mesh capsules?

 

[Petetbay]

after a some days...would you say fury/potv one/fenix mini caps are worth it?

I have only did a couple bowls of herb in the SS caps and the experience was the same as the the Rogue though smaller scale. The cap works to make the pure convection into a hybrid with the cap providing conduction heat as the cap gets hot. The bowl size is less with the cap so less product to produce vapor so it gets fully extracted quicker and taste is a little harsher. Whether it’s worth it is very subjective so can’t say. It is very convenient for on the go use and there is nothing to clean really in the device when used except the regular reclaim buildup in mp.

 

[sesh732]

Where does one purchase the v3 pro in the us?

 

[maremaresing]

Thanks again everyone (and @Petetbay ) for trying the Fury 2 cap option for fit! I've been using the POTV One caps that arrived this week and am really enjoying them. With the addition of slight conductive heating, you get an even roast without stirring or flipping the cap. No hotspots, completely even ABV.

As if that wasn't good enough, the dosing caps add a nice bit of draw restriction to negate my desire to cover the air intakes. The unit is sleek once again!

Really really loving the dosing caps, and am currently on the hunt for a keyring pill container that is just big enough to hold one or two caps.

 

[Bazinga]

Where does one purchase the v3 pro in the us?

Been asking the same question for a couple of weeks.

Tried to buy it from the Canucks but have been unsuccessful.

 

[kokolokokolokon]

@Petetbay And @maremaresing
If you are from Europe, where did you buy that capsules in europe? I found it on la centrale vapeur but 2 caps+ shipping is 20€ when the "normal" pack (4 caps on a tube) cost 15-20$ in other webs. I found some webs but It is out of stock

 

[CatchDoubleDuece]

@Bazinga - Bought mine from a brick and mortar called Twisted Sisters in CA a few weeks ago but I'd suggest calling them first to ensure nothing has changed shipping to US as of recent. Another thought is Alibaba group/bulk buy...saw a 5 unit price of $48ea but also allowing a min qty of 2 @ $109ea. Gonna hit my local smoke shop up here in SoCal and see if they are interested in carrying this.

On the other hand, I kind of get the feeling the marketing/mfg co may not want this to hit US markets yet. Feels like they are using EU/AU/CA audiences to flush out a more refined version to hit the US market but I could be wrong, just a feeling.

@kokolokokolokon Not in EU but POTV has 4-pack of the POTV One capsules on sale for $10.

 

[kokolokokolokon]

@Bazinga - Bought mine from a brick and mortar called Twisted Sisters in CA a few weeks ago but I'd suggest calling them first to ensure nothing has changed shipping to US as of recent. Another thought is Alibaba group/bulk buy...saw a 5 unit price of $48ea but also allowing a min qty of 2 @ $109ea. Gonna hit my local smoke shop up here in SoCal and see if they are interested in carrying this.

On the other hand, I kind of get the feeling the marketing/mfg co may not want this to hit US markets yet. Feels like they are using EU/AU/CA audiences to flush out a more refined version to hit the US market but I could be wrong, just a feeling.

@kokolokokolokon Not in EU but POTV has 4-pack of the POTV One capsules on sale for $10.

That pack is what i want XD but if i buy It from EEUU the taxes and shipping are more expensive than the caps, and in EU i can buy It on lacentrale, but one by one (TT_TT)

 

[LesPlenty]

Feels like they are using EU/AU/CA audiences to flush out a more refined version to hit the US market but I could be wrong, just a feeling.

Pretty sure that is what the X-Max V1 and V2 did.
@PPN said peeps from the US will have access soon direct from them.

 

[Fat Freddy]

Here's the reply I received from Top Green, FWIW.

"TOPGREEN team is on National holidays now from Sep.30th 2021 to Oct. 7th 2021. But we will still get back to you as soon as possible.
The Xmax V3 Pro will be release in the USA on middle of October, will send you link for purchase then.

Have a good day!
Best Regards
Topgreen Team"

.

 

[XpeeN]

That vaporizer seems quite interesting, I wonder what and if they will actually improve the v3 pro when releasing it to the USA.
Anyway, I have a question about the on-demand mode, does it heat up until it reaches the temp you set or does it stay at lower temp and then ramp up while you hit it?

 

[Petetbay]

That vaporizer seems quite interesting, I wonder what and if they will actually improve the v3 pro when releasing it to the USA.
Anyway, I have a question about the on-demand mode, does it heat up until it reaches the temp you set or does it stay at lower temp and then ramp up while you hit it?

It’s the on button for the heater, when not pushing button it’s off, duh.

 

[Cheebsy]

I know I shouldn't really be asking this here but I'm going to anyway as it's not performance based.

I'm thinking of buying one if these for my missus. She is used to my potv one, but has come to hate the draw restriction, and it's hardly used at all these days. Is the v3 less restrictive than the one? I know they aren't the same style of vape, this question is only about the restriction. TIA

 

[Fat Freddy]

Still, having been burned once already by P.A.C.T. in my attempt to purchase this vape, how is that going to play out this time? Are there any couriers in the USA that aren't kowtowing to this law so we can be assured safe delivery?

.

 

[kokolokokolokon]

I know I shouldn't really be asking this here but I'm going to anyway as it's not performance based.

I'm thinking of buying one if these for my missus. She is used to my potv one, but has come to hate the draw restriction, and it's hardly used at all these days. Is the v3 less restrictive than the one? I know they aren't the same style of vape, this question is only about the restriction. TIA

I dont know how the potv one draw restriction is, but the V3 has a very low restriction draw. Some people on here like to add restriction on this device (sometimes i do It for a harder hit).
On a normal use you dont need to puta effort to draw (+cooling unit on the MP = perfect for throat problems)

 

[LesPlenty]

She is used to my potv one, but has come to hate the draw restriction, and it's hardly used at all these days. Is the v3 less restrictive than the one

I have a Fury2 that is similar to the POTV One and the difference is like night and day, the V3Pro filled with herb has about half the resistance than an empty F2.