Discontinued Thermovape Cera
- Thread starter SameOldTim
- Start date
OF
Well-Known Member
Actually pretty well, almost like they'd designed it to? Which of course they did. The ring seals on the mouth of the 14mm connector, just inside the mouth on the top of the bore in the 18mm. It also works pretty well without the seal at all (done that too).
If you put the cover on it, the cover seals it as well, no seal is needed.
FWIW it think it's a little easier to hit the 18mm hole, but not enough to worry about?
OF
ataxian
PALE BLUE DOT
How's the flavor?It is actually not that bad to use with one hand, I sort of grasp the bottom near the start of the SS part with thumb and forefinger, while also cupping the end of the switch with my last three fingers
Seriously though it is not that hard.
Any way I am gonna have a go at posting a photo like I promised.
Here is Cera being introduced to her new home, It used to be a logitec portable speaker case, that got re-assigned a while ago.
Also this one showing where I added another o-ring onto the cart to make it seal properly (OF was right it had nothing to do with the screw)
amilehigh
Well-Known Member
I was supposed to know how everything fits with a bubbler based on that picture? I've read this entire thread and trust me, there will be plenty of folks lurking that will be happy i asked. Like i said, its my first vape. I've seen a lot of bubblers in the glass thread but some look like they have strange attachments or are described as vapor bubblers. I guess with the cera, though, any bubbler would work as long as its 14mm or 18mm...
iamn3ko
Well-Known Member
An o ring slides over the tip of the mouth piece and sits right at the bottom of the tip of the mouth piece, that will fit 14mm glass, there's also the wider raised beveled circle around the mouth piece tip that when sealed by the o ring will fit the 18mm glass.
But with the skins that are supposedly still supposed to come out, those will give you a full seal around the mp, which you then won't need an o ring for.
EDIT: Oh btw, I believe that thing in the bottom right corner is an electric grinder
Medical Mark
Well-Known Member
Hey all my Cera is on the way and I just got my new T1 I'm so excited it should be here on Monday or so I'm gonna get primed up with T1 and get my vape on figure this convection thing out, my T1 should do the trick I have a power supply coming (thanks pipes) it should be too by Monday so I can get the most out of this T1 and eliminating the need for batteries at home. I guess the batteries are for travel only. I know you guys are wondering why would he get a T1 when he's got a Cera on route well I want the full experience of thermovape products and convection vaporization and I figured since it will no longer be made its like a antique which will last forever solid ass vape and beside its a great back up and the T1 will work with my Bulli LoL
I wish I knew how to do videos better a easier way to post vids on here cause next week I'd love to post something some one help me post some reviews,.
Cheers, medical mark
I wish I knew how to do videos better a easier way to post vids on here cause next week I'd love to post something some one help me post some reviews,.
Cheers, medical mark
The beauty of innovation...
buchee
Well-Known Member
Who wants to see some silent Cera porn???? 
Made my own latching switch until proper one gets here.
If you look closely you can see the glow of the heater when its warming up.
By the end I was HEAVILY medicated...so much so my head was slowly weighting itself down to the side...hehe
After having Cera for a week now I have found it very natural feeling to inhale slowly. Almost self-calming and meditative-like. Anyone who does yoga or meditates will find this very easy and those who don't will get the hang of it quickly IMO.
Made my own latching switch until proper one gets here.
If you look closely you can see the glow of the heater when its warming up.
By the end I was HEAVILY medicated...so much so my head was slowly weighting itself down to the side...hehe
After having Cera for a week now I have found it very natural feeling to inhale slowly. Almost self-calming and meditative-like. Anyone who does yoga or meditates will find this very easy and those who don't will get the hang of it quickly IMO.
buchee
Well-Known Member
ColoVaper-- Thanks!
Here's the specs for the Pelican storm case. This thing is airtight, waterproof, and tough as nails....just like my Cera
http://www.mec.ca/AST/ShopMEC/GiftIdeas/PaddlingGifts/PRD~4009-434/pelican-1120-case.jsp
ColoVaper-- Thanks!
Here's the specs for the Pelican storm case. This thing is airtight, waterproof, and tough as nails....just like my Cera
http://www.mec.ca/AST/ShopMEC/GiftIdeas/PaddlingGifts/PRD~4009-434/pelican-1120-case.jsp
Thanks for sharing the link. I have two for my camera equipment and completely forgot they made smaller sizes, some of the best hard cases you can get IMO. Great for taking important stuff you want to keep safe when flying!
I used one of the o-rings supplied by TV I just found I was getting a bit of air up the side of the cap, I thing this is an isolated incident as buchee seems not to have any problem, (actually buchee if you cover the inlet holes can you still suck air through? I could till I added the o-ring)
The LLC works like a dream now all the air I move through it now has no choice but to pass through the cart.
Taste is great
And yes that thing on the bottom right is an electric grinder, based on a battery powered fan :-) have had it for years, works great.
Edit: Hey buchee is that simply a bit of scrunched up al-foil? Does it get warm?
Double edit: just tried it works fine
The LLC works like a dream now all the air I move through it now has no choice but to pass through the cart.
Taste is great
And yes that thing on the bottom right is an electric grinder, based on a battery powered fan :-) have had it for years, works great.
Edit: Hey buchee is that simply a bit of scrunched up al-foil? Does it get warm?
Double edit: just tried it works fine
buchee
Well-Known Member
TheRobbo---When I cover up the airholes I get restricted/no airflow. And the highly sophisticated latching switch is indeed a scrunched up piece of tinfoil which does not get warm one single bit. The mouth piece got hot as f$%$ tho at the end of that session when I took it off. I'll be thankful when those thermal sleeves come in, but as you can see there are easy ways around this.
buchee
Well-Known Member
TheRobbo,
I'm not Buchee, but yes it 1/2 inch. BTW, thanks for your response. Neat little grinder you have there.
NN
Vapzilla
Well-Known Member
Who wants to see some silent Cera porn????
Made my own latching switch until proper one gets here.
If you look closely you can see the glow of the heater when its warming up.
By the end I was HEAVILY medicated...so much so my head was slowly weighting itself down to the side...hehe
After having Cera for a week now I have found it very natural feeling to inhale slowly. Almost self-calming and meditative-like. Anyone who does yoga or meditates will find this very easy and those who don't will get the hang of it quickly IMO.
Sweet, thanks for the review!
I thought I was going to ask you if you needed to stir and how the ABV looked,
guess not, very thorough.
buchee
Well-Known Member
My pleasure Vapzilla, this is just a teaser for all of you who are waiting to get their hands on theirs. The wait was worth it and the LL totally rocks. I Don't think there will be any more naysayers......or anymore questions as to whether or not it really works.
OF
Well-Known Member
OF
Well-Known Member
HA, what was I thinking OF. Your probably right.
I believe some genius gave me the design for my new switch
I hope you had the presence of mind to patient such a brilliant idea? You could be selling aluminum foil to new owners......
Think about it a bit, I bet you can figure it out? If not, try it with yours and see what happens?
OF
kushcabbage
vapor nerd
I missed something, what is up with shoving tinfoil into your cera? Latching switch works how like that? That would be fun to try to explain to your smoking friends. "Hey hold on this new vape works best with large amounts of tin foil inserted as a suppository from behind.."
Would I personally spend ~250-400 on something that for some reason I'd have to insert tinfoil into to use propertly or more perhaps more convenient? Absoulty not. I'd like my devices I buy to work the way they should from the moment it is in my hands. Does not honestly sound safe to me about aluminum foil inside a cera, but what do I know. I was just looking for a straight answer about useage procedures for a medical device, for someone who would need it medicinally. Thanks for your time.
*back to back, quotes messed up*
Would I personally spend ~250-400 on something that for some reason I'd have to insert tinfoil into to use propertly or more perhaps more convenient? Absoulty not. I'd like my devices I buy to work the way they should from the moment it is in my hands. Does not honestly sound safe to me about aluminum foil inside a cera, but what do I know. I was just looking for a straight answer about useage procedures for a medical device, for someone who would need it medicinally. Thanks for your time.
*back to back, quotes messed up*
buchee
Well-Known Member
Having to hold in the momentary switch for long periods of time(such as with the LL) cramps my fingers/hand. This way i can wedge the tinfoil and latch itself inside to make a connection and can then let go making it much easier. I think by the time I made the video it had become a little mishapen so it wasn't latching fully. Otherwise I could normally go one handed without having to touch the tinfoil. Does that make more sense?
OF
Well-Known Member
So it wasn't a serious question but another shot at TV?
I thought we'd been here before?
OF