Discontinued Omicron Vaporizer for oils

Jay420

Member
Do you remember i said something about the Nail cart be ready in two weeks, but we did not have one, so the engineer was gonna bust his ass now to get it?

Well guess what? Testing starts Next Friday along with the Universe
I finally know exactly what that next pay check is going to lol.
 

tharealmclovin

Well-Known Member
Do you remember i said something about the Nail cart be ready in two weeks, but we did not have one, so the engineer was gonna bust his ass now to get it?

Well guess what? Testing starts Next Friday along with the Universe


Let me know if you need a Midwest test subject
 
tharealmclovin,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Here is your next three piece suit.

Easy to clean works wonderfully but I hate it, so tomorrow i will post up shots of the design we most likely will go with.


Oh btw this is the nail cart.



DSC_0071.jpg


DSC_0095.jpg




DSC_0099.jpg
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer

Bob Loblaw

Astralnaut
Omicron High Voltage Device. 7.4v baby 7.4v
WOOT! Gotcha this is what we are getting at discount for a week. not a trade in just bigger package. niiiice.
any way an extra top will be available as an accessory? would love to turn the whole thing into two fully functioning small and tall 3.7 omi's as well as the 7.4 longboy.
 
Bob Loblaw,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
WOOT! Gotcha this is what we are getting at discount for a week. not a trade in just bigger package. niiiice.
any way an extra top will be available as an accessory? would love to turn the whole thing into two fully functioning small and tall 3.7 omi's as well as the 7.4 longboy.

the other top we will have as upgrade for a fully functioning almost unbreakable no limit 4.2v max upgrade soon. We just put them into production.
 

Bob Loblaw

Astralnaut
niiiiice :clap::rockon:. is the HVD of the same brick stabbing quality? i'll get one regardless, just curious, lol
 
Bob Loblaw,

JoeKickass

Well-Known Member
Here is your next three piece suit.

Easy to clean works wonderfully but I hate it, so tomorrow i will post up shots of the design we most likely will go with.


Oh btw this is the nail cart.



DSC_0071.jpg

What's so bad about it? I think the only thing wrong is it's a bit long...

Edit: lol finally beaten by someone for a change!
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Guys it works great, but it does not fix a lot of the issues this type of nail cart has. I wont say what these issues are with this design since we want other companies to research it themselves but trust me, this design no bueno.
 

Bob Loblaw

Astralnaut
Guys it works great, but it does not fix a lot of the issues this type of nail cart has. I wont say what these issues are with this design since we want other companies to research it themselves but trust me, this design no bueno.
as always, trust you to do it right. will wait for perfection.
 
Bob Loblaw,

SlideOrDie

Well-Known Member
Yes. It is, this is going to be the standard now on future production.

So with the HVD upgrade we get the following?

1 x 7.4v top to be used with short tube as well
2 x 14250 battery
2 x 14250 Battery Spacers
1 x Bottom cap for 7.4v as well as 3.7v mini
1 x Short tube for single 14250 battery configuration.
 
SlideOrDie,

GR

Well-Known Member
the other top we will have as upgrade for a fully functioning almost unbreakable no limit 4.2v max upgrade soon. We just put them into production.


I have been waiting to pick up the V2 until this top comes out.

Will this be the top used in upcoming V2 kits?
 
GR,

tharealmclovin

Well-Known Member
Come on fellas, were asking for ETA's damn near every day. I an just as anxious as ya'll. The man can get more done w/o it. Mclovin man, please no asky for testy, its in the rulesy.


Sorry you couldn't see I was joking. Like anyone really expects the only prototype sent to Chicago for testing.
 
tharealmclovin,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
So with the HVD upgrade we get the following?

1 x 7.4v top to be used with short tube as well
2 x 14250 battery
2 x 14250 Battery Spacers
1 x Bottom cap for 7.4v as well as 3.7v mini
1 x Short tube for single 14250 battery configuration.


Yes that is the package

I have been waiting to pick up the V2 until this top comes out.

Will this be the top used in upcoming V2 kits?

Not for a while, because after this batch there will be a slight price increase to include the water proof and new connectors.

But the HVD upgrade top you can use on a 3.7v without the limiter.
 
THC SCIENTIFIC,

wthanna

Well-Known Member
This question is for those of you who have actually used both the 7.4 and 3.7 Delta9 products.

I am considering the HVD upgrade. I would like to know in terms of vapor production, what order you would put the combinations of carts and voltage in. I would like to order a 5 pack of carts with this order, but I don't want to order the 5 ohm carts, for example, if 5 ohm at 7.4 produces less vapor than say 1.5 ohm at 3.7, which I already have. I am looking for the next step UP in vapor production, not down.
 
wthanna,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
This question is for those of you who have actually used both the 7.4 and 3.7 Delta9 products.

I am considering the HVD upgrade. I would like to know in terms of vapor production, what order you would put the combinations of carts and voltage in. I would like to order a 5 pack of carts with this order, but I don't want to order the 5 ohm carts, for example, if 5 ohm at 7.4 produces less vapor than say 1.5 ohm at 3.7, which I already have. I am looking for the next step UP in vapor production, not down.


Well if your easy on the trigger boss you can go 4 ohm on 7.4v and fill your needs.
 
THC SCIENTIFIC,

Bob Loblaw

Astralnaut
naaa, we are just really good at it. You know why? cuz we the best haha had to brotha, thanks for the video that thing made me laugh a bit.
glad ya got a chuckle, my man. i know ya stress enough.

on a side note just found some clear, HIGH TEMP (looking at you OF) tubing for attaching these suckers to water pieces.
http://www.northernbrewer.com/shop/3-8-clear-hi-temp-tubing.html
not sure if this was ever solved b4. i know some people had opaque food grade vinyl and stuff, but thought this woud be tits in terms of safety and visibility. with a silicone tip all should be perfect.
 
Bob Loblaw,

GR

Well-Known Member
Not for a while, because after this batch there will be a slight price increase to include the water proof and new connectors.

But the HVD upgrade top you can use on a 3.7v without the limiter.

Gotcha .

I really need a cheat sheet to keep all the upcoming products straight between the Persei and the V2, lol.

Can someone lay out pro vs con of buying the V2 with the HVD upgrade vs buying a Persei? I guess the stealth of having the more compact size for travel is nice but my V1 looks just like my ecigs so I find it very stealthy. I am really trying to figure out which unit will be more versatile for home use with all the various attachments.

Another question for those that own both is what are the advantages of the carts for higher volts? My old and worn out lungs are very happy with hits from the 1.5ohm carts on the V1.
 
GR,
Top Bottom