1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

Herborizer corner

Discussion in 'Plug-in Vaporizers' started by marcuss, Jun 29, 2008.

  1. Carlos8400

    Carlos8400 Well-Known Member

    Messages:
    174
    You can use an adapter or buy a UK Mains Plug to IEC C7 cable, which is what you would have received had you asked for the UK power cable.
     
  2. Alexis

    Alexis Open minded philosopher and realist.

    Messages:
    1,065
    Location:
    Bedford, United Kingdom
    Greetings for the new week. Some XL love- I have enjoyed having my original Herborizer back in action. Yesterday I tried the raised screen method to work with a smaller load for large hits.
    I used the Aromed 4.0 screens, they are a little bigger than the Herborizer ones, so they sit concave on top of the dimples:
    [​IMG]

    See how small the load is. Only 0.2 max if that, with the screen raised I kept to my max tolerated heat of 7, but I got very good hits from the go. Really good clouds and powerful effect. Much more than with the screen below the dimples, unless you load more.
    [​IMG]
    Looking down from atop- I had already had a good few very nice hits by then, but still very golden. Notice the evenness of extraction the XL can provide.
    [​IMG]
    Check this out for even extraction, compared to the unvaped bud. Does this abv look good or what?! A sign of a quality vaporizer I believe.

    Raising the screen works and elevates the hitting power and extraction of the XL. However, I tried this method before and it bothered my throat a lot more. The same occured yesterday, it just caused too much irritation for me.

    I lowered the screen to finish the load, there was a good bit left actually, and even with the screen below dimples, from this already used small load, I still got impressive and very visible clouds. As the day went on I did get very canned from vapes and edibles.:D

    Next to be loaded into the Xl is some lovely orgainc outdoor auto Durban Poison. It really isn't bad for a product of British weather and very minimal fertiliser, zoom in on the trichs if you don't believe me!:
    [​IMG]
    Have a cool week everybody in the (expanding) Herborizer family.:)
     
    Last edited: Sep 11, 2017
    Joaon, biohacker, lazylathe and 2 others like this.
  3. Ech0_

    Ech0_ Member

    Messages:
    27
    Hey thanks! And I would of asked for UK plug if I could, but I bought it from Vaposhop and wasn't given that option.
     
  4. The Beagle

    The Beagle Butanist Bubblemaker

    Messages:
    560
    Location:
    Italy
    I hate quoting myself but this got unanswered so:

     
    PPN likes this.
  5. PPN

    PPN Fleurs&Vapeur

    Messages:
    3,079
    Yes, you can.
     
    MrMonss, Hogni and The Beagle like this.
  6. The Beagle

    The Beagle Butanist Bubblemaker

    Messages:
    560
    Location:
    Italy
    Thanks.
    I think my upgrade from XL to Ti is a bit closer now...
     
    Joaon likes this.
  7. btka

    btka Well-Known Member

    Messages:
    876
    I am planning to buy a new desktop... but can not decide between the flowerpot and the herborizer ti...

    what I am searching ... as some of you may know I am a cloud chaser so big dense vapor clouds are very important...
    I also want to be able to microdose with my new desktop and looking to get also big clouds from small loads of herb...
    also I am looking for a desktop which give me big flavourfull hits... also I want to mention that I am planning to use my new desktop mainly for flowers as it is hard to get good concentrate where I live... maybe also important I from europe...

    1.) big vapor clouds? (scale 0 to 10 - (0 no clouds , 10 big fat clouds of vapor))
    flowerpot
    herborizer ti

    2.) microdose and big clouds? (scale 0-10)
    flowerpot
    herborizer ti

    3.) taste? (scale 0-10 (0=bad taste 10=superior taste)
    flowerpot
    herborizer ti

    thank you!

    what is your opinion @lazylathe as far as I knowmyou havenboth of them and I watched your videos several times...
    and of course all other members who can help me making a decision!
     
    MrMonss, The Beagle, Joaon and 2 others like this.
  8. lazylathe

    lazylathe Almost there...

    Messages:
    2,934
    Location:
    Ontario, Canada
    Sending you a PM!
     
    Hogni, Alexis and btka like this.
  9. Techn!d0n

    Techn!d0n Well-Known Member

    Messages:
    170
    Hey I have a question I'm in the U.S. and can't get my payment processed. U guys have any ideas? I need a new injector... Mine broke a week ago... :(
     
  10. Alan Partridge

    Alan Partridge Smell my cheese

    Messages:
    278
    Very quickly-

    1- TI 10, FP 10
    2- dunno
    3- TI 8, FP 9

    I have the OGFP though, no showerhead
     
    lazylathe, btka, Hogni and 1 other person like this.
  11. Joaon

    Joaon Well-Known Member

    Messages:
    212
    Location:
    France
    I would have said that the Herborizer has a superior taste .. :shrug:
    But honestly, I couldn't part with one or the other !


    A major point of the herborizer that was not mentionned early, is the power consumption!
    Herborizer is rated max at 36w (12v), while Flowerpot is around 100w (220v).

    Waiting on the DigiTi .. :ninja:

    :cheers:
     
    Last edited: Sep 14, 2017
    latulipe999, btka, The Beagle and 3 others like this.
  12. Alexis

    Alexis Open minded philosopher and realist.

    Messages:
    1,065
    Location:
    Bedford, United Kingdom
    And the Glass Symphony is also exceptionally good consumption wise.
     
    The Beagle, Hogni and lazylathe like this.
  13. Jazzah

    Jazzah Well-Known Member

    Messages:
    72
    Location:
    Belgium
    Does anyone have any idea, or a vague estimate as to when the micro dose bowl will be available? I want that sooooooooo badly. Thanks
     
    btka, Hogni and Pustupillo like this.
  14. Pustupillo

    Pustupillo Vaporizing > Smoking

    Messages:
    63

    Same here guys :)
     
    btka likes this.
  15. Jazzah

    Jazzah Well-Known Member

    Messages:
    72
    Location:
    Belgium
    @bleak
    Not sure if this was done with your permission.
    Click to play YouTube Video
     
    TNT_error and Hogni like this.
  16. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    1,532
    Location:
    Berlin, Germany
    Yesterday I bought the Herborizer Ti stand with the heavy stainless base - awesome! Absolutely stable standing of heater and cable. And it looks sexy too - a must have accessory.
     
    The Beagle, Alexis and Joaon like this.
  17. Techn!d0n

    Techn!d0n Well-Known Member

    Messages:
    170
    The customer service is quite impressive. I hope the shipping is as well.
     
    MrMonss likes this.
  18. Alexis

    Alexis Open minded philosopher and realist.

    Messages:
    1,065
    Location:
    Bedford, United Kingdom
    Sebastien is a pro in everything he does. He really is on the ball as much as any vape seller I have dealt with. If he used dhl like he did with me when he fixed my broken injector for free a few weeks back, and shipped it- for free!...

    then it should travel fast and secure. I got mine the next day in the UK from France. It was due on the thursday but came early. Sebastien only received my broken injector on the monday morning.

    By wednesday afternoon, I had it back, new heating element, and "oven cleaned" to shiny new!
    Basically a 100% new injector, effectively, and I didn't even have to pay the shipping.

    I just wanted to say another time what a nice guy and good business man, but with a heart and not trampling on anybody. I wish Herborizer the best success. There is big competition from other manufacfurers nowadays, thankfully mainly in the US, although some are coming to these shores very soon.

    But Herborizer do a lot of very high quality products (extractors etc) as well as excellent vaporizers tnat will always be very attractive and satisfying.
    Wishing them the best anyway.

    Can you tell Im high again? Seems to be standard lately. I don't just get stoned, I use weed to affect my consciousness in a positive way. Using the XL actually tonight, Think Differnet again, after Durban and Colorado Cookies vapcaps, and edibles earlier. I've only had a few pulls of the Think Different just now, need more.

    Big love everyone.:tup:
     
    latulipe999, Hogni, btka and 3 others like this.
  19. bleak

    bleak Well-Known Member

    Messages:
    259
    Location:
    Down Under
    Thanks for the heads up! They could have been given permission by Herborizer themselves, I'll find out.

    Since I'm posting, might as well say I've got a complete Ti system, stand, steamroller, and a custom icetube on its way from France to my doorstep :bowdown:

    Calling my dealer to stock up on herb :brow:
     
  20. p0tti--

    p0tti-- New Member

    Messages:
    2
    Just be really careful when you put on the glass onto the steel base (if you disassemble it). Mine unfortunately broke on the third day.
     
    The Beagle likes this.
  21. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    1,532
    Location:
    Berlin, Germany
    Thank you very much for your worthful advice. But I really don't why I should disassemble it!?
    But for sure glass breaks. Another reason not to make a stand for the GS all out of glass.
     
  22. p0tti--

    p0tti-- New Member

    Messages:
    2
    For me the reason is that i'm travelling much and carry my vape in my backpack and it's basically at another place every day. And to transport everything secure i've disassembled the glass part (looks like it should be able to be used like this, since it will be attached the same way the interchangeable Dryherb/Dab heads are) and put it i foam.

    I'm sorry, i didn't want to offend you. In my case it was veeery little pressure and don't want this to happen to anybody else, especially no one to have cuts in their hands.
     
    Hogni and MrMonss like this.
  23. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    1,532
    Location:
    Berlin, Germany
    Not feeling offended in any way. Now I got it
     
  24. Ech0_

    Ech0_ Member

    Messages:
    27
    Been using my new herbo ti for the last couple of weeks and love the performance but I have a quick question which I did try to search for but couldn't find exactly what I wanted to know.

    It appears my screen wasn't installed correctly like some have reported as upon first using it a couple of times this is what my bubbler looked like:

    [​IMG]


    When I had a closer look I could see that the screen seemed to be slightly off centre, leaving a 0.5-1mm gap on the "right" and then a larger gap (~2mm) on the "left" as it was also bent slightly up there, I tried bending it back and its helped somewhat but I still see alot of un-vaped herb making it into the bubbler still and all further attempts to move/reseat it fail as it just seems to pop back to where it was...

    My question really is what shape are the screens supposed to be? As my next step was to remove, heat then flatten and reinstall, or fail that, just replace the screen but when looking at my replacement ones they look like:


    [​IMG]

    Should they be flat or is this the shape best suited to creating a perfect seal around the edges to stop herb dropping through?

    And does anyone have any tips for replacing screen or is it as simple as popping it in?

    Thanks!
     
  25. Carlos8400

    Carlos8400 Well-Known Member

    Messages:
    174
    What you are seeing isn't really anything to do with screen tightness.
    It's just "vapor goop", resin build up, i don't know if water hardness does that, but sometimes it builds up evenly on the walls of the glass, sometimes it creates weird blobs like that.

    The Screen only prevents solids to go through. They do't need to be 100% tight. I clean and reuse mine forever. Still on my original one on my Ti after 7 months. I use a chopstick to push mine in or out.
     
    Last edited: Sep 29, 2017
    MrMonss likes this.

Support FC, visit our trusted friends and sponsors