Dgtheonlyg
Active Member
thanks for the update, i had never given my hopes up with you working on that nail cart
Discontinued Omicron Vaporizer for oils
- Thread starter THC SCIENTIFIC
- Start date
we will confirm the HVD this monday and start production again and replaces also.
kindbeats
Terps Up, Temps Down
That's what I thought as well. Are the stainless steel tanks dual purpose or not? G, any clarification?
they will be if we introduce a oil cart for it, but for now we are re thinking this as some issues popped up with them. But the tanks work great for ejuice.
Agent S.S. Sands
Member
Is it required to replace our HVDs or if we happen to like the clickon clickoff and have had no instances with the head turning itself on, do we keep our originals?
not sure if the hvd will run the herc we shall see next week.
Blue Dream
Member
What a bummer if it doesn't! I've been waiting patiently for the new carts.
Dont worry we still have the leak proofs in molding stage now, we are not going to leave anyone behind brotha. The Hercules is designed for the Persei it could work with the Omicron but we have to test and see.
Pass thru system for omni please explain as I missed that point in class. must been hittin my persei.
But to use glass chamber do u need nail head or some other heating device or is it in the glass system>
Sorry for nappin and not catching all the course but if someone could update or let me look at your notes I would greatly appreciate.
But to use glass chamber do u need nail head or some other heating device or is it in the glass system>
Sorry for nappin and not catching all the course but if someone could update or let me look at your notes I would greatly appreciate.
havealight101
Norski
Out of principle i won't say.... Use the search function. Your post basically said your to "busy" to look up the answer, and you would like someone else to do it for you.... Best of luck....Pass thru system for omni please explain as I missed that point in class. must been hittin my persei.
But to use glass chamber do u need nail head or some other heating device or is it in the glass system>
Sorry for nappin and not catching all the course but if someone could update or let me look at your notes I would greatly appreciate.
Pass thru system for omni please explain as I missed that point in class. must been hittin my persei.
But to use glass chamber do u need nail head or some other heating device or is it in the glass system>
Sorry for nappin and not catching all the course but if someone could update or let me look at your notes I would greatly appreciate.
Interpretation seems to matter.
I think there is a valid question here which hasn't been touched upon before: What "pieces" does one purchase to get a "Plan B" herb chamber completely functional? And what changes for an Omicron reactor vs. a Persei?
Immediately after seeing this I have to wonder if Plan B will come with a Hammer (and then, 750 or 1200) and on/off head or if they are separate items. If they are sold as a package, are there different versions with Omi HVD heads and Persei heads? for each color? IIRC, G said that it would work with the Omi after the reactor was released in a few months - Exactly what product(s) that will be seems a valid question - Though probably one that can't be fully answered yet. I guess/hope separately ordered items for the herb chamber, Hammer and head, but that will complicate things for many people and I don't have to decide (fortunately).
-NDA
kindbeats
Terps Up, Temps Down
Wow. If the Hercules doesn't work on the HVD, I will feel pretty slighted to say the least. I purchased the HVD so that I could drive the higher powered carts and eventually get the Nail Cart. Now that the Nail Cart is cancelled, if the Hercules carts don't work on the HVD , what options are us v2 owners left with for massive vapor production? I haven't had a single problem with carts leaking so that's not a major concern for me. My concern is getting larger rips that are tasty and being able to load my carts without the need for a fill tool.
Silvercloud538
Well-Known Member
kindbeats
Terps Up, Temps Down
Just curious ,what is it that turns you off re: 'fill tools' ?/?
I just think a load as you go style cart would be extremely beneficial for those that don't want to commit to melting down half a gram at a time. Hence, the reason I was so stoked on the idea of a Nail Cart with a built in dabber. Definitely disappointed right now and I really hope that the Hercules carts work with the HVD, otherwise I may as well sell my v2 and HD and purchase a Persei (which isn't that stealth and I don't have enough bread left for one at the moment). So far, the Ego-W's are the closest thing to a load as you go option, but we all know that they are not designed for use with essential oils (still works, though!)
OF
Well-Known Member
But they're not the only game in town, Revolution/DART is just such a 'load as you go' beast. Designed for the duty, in fact will also work with bubble hash. Although you need a thread adapter (from either D9 or TV) V2 will drive it just fine in the right configurations. No need to wait or sell your V2.
OF
kindbeats
Terps Up, Temps Down
Thanks OF. My goal was to try and stay as loyal to Delta9 as possible, but it looks like I might be picking up a DART soon after all. Could you tell me which specific kind of thread adapter I would need? Also, how does the DART work? I think I read somewhere that it needs time to heat up. Any feedback you can give me would be more than appreciated!
Also, would the DART be compatible with the HVD top?
Silvercloud538
Well-Known Member
Load as Ya Go is a fine approach ,but it seems almost useless 'on the go' (outdoors) ~
personally waiting for R&D on V2 Pass_Thru via an HVD ,utilizing Hercules/Universe
adapters ~ of course ,for just wax/budders ,still prefer O-Phos for stealth
For the thread adapter, both D9 and TV make models. The D9 unit can be bought as a package from D9 or individually from PV. The TV unit, as expected, comes from TV. OF has recommended the $2 "One Love" adapters before, but I haven't seen them in months (I suspect One Love has evaporated like many similar concerns). There is another $2 choice:
http://www.litecigusa.net/Smoore_Thread_Adaptor_p/smooreadapt.htm
BTW. There is now another (more expensive) supplier for the inverse (i.e. 510->601):
http://www.tropicalvapors.com/Adapt...artomizer-Omicron-Super-Nova-Smoore_p_68.html
It even says for Omicron carts at the top of the page.
-NDA
OF
Well-Known Member
You're welcome, I hope it helps.
Once again, NDA is right there with the straight poop. He's also right, I gave up on One Love after they dried up, it's going to cost a little more is all (although the LiteCig one looks good?).
DART (and Revolution) work by absorbing a small amount (a few tenths of a gram at most) of concentrate into a porous ceramic material (actually two pieces) around the heater. It takes several seconds to get the entire lot warmed up enough so the parts nearest the heater reach 'vaping temperature' and produce. It can produce LOTS of vapor without cooking the oil and spoiling the taste. The trade off is it works best with a very small load. More floods it out and will leak out the bottom. There's an excellent forum on the topic, full of happy owners, you might want to check it out.
Yes, I've run mine on my HVD but it only really works well with the AW IMR 14500s (not the 14650 shipped with V2). In fact it was just that very trial (DART on HVD using 14650) that lead me to discover the problem with the stock battery and the .3 Volt additional output available from the 'inferior' battery.
I understand your 'brand loyalty' and all, but I see this from a Capitalist consumer standpoint. The market is providing us with a wide assortment of products to suit our needs and desires, if we're going to be Capitalists we should reward that as appropriate IMO. I use and recommend products from both D9 and TV, I think there's an excellent match going on, benefiting all. I don't see a 'Ford or Chevy' thing at all. As always, your call, "vote with your wallet" as the saying goes.
Best wishes.
This confuses me, SC358. I agree, reloading a DART under 'field conditions' can be awkward but you kind of lost me on how the future pass thru will help this. Seems to me it's usefulness outdoors will end at the end of the extension cord?
While I don't have an O-Phos, I have a few V1s, V2, Ultra, Ultra Lite and a few similar (and smaller) e-cig units that are good at stealth so I think I follow that part (although my personal preferences run to even smaller).
OF
Silvercloud538
Well-Known Member
If people want the nail cart i will see what i can do this week about putting it in production.
kindbeats
Terps Up, Temps Down
You have no idea how happy you just made me. Out of curiosity, why did you decide to nix it in the first place? I know you don't like to give out too much info because of the competitors always waiting for you to drop your newest gear, but I'm definitely curious as to why you weren't happy with it originally.
Well we efed up man. Back in January i posted a video of our nail carts, then i think a day or two later a competitor started selling their units, ours had a similar design. so we nixed the idea because now if we put it out its going to look like we copied theirs. Then we decided to redesign it and fix the issues we found from the competition's device, and we did then they released the second design that was similar to our re design, because of this we went back to the drawing to make a different version so it does not look like a copy. Then after all of this the Hercules carts where almost done and going into testing. I started to concentrate on the the herc, universe, and leak proofs more then the nail cart because one the competition has the LAyG already with addition to that the atomizer systems from Chinese ecig's making into the main stream HAT boards we just could not compete with price wise on it. So we scrubbed the that idea all together. Now ill go back to the drawing board and try to see what we can do to bring them into limited production run.
OF
Well-Known Member
OF ,if my understanding of the performance of pass_thru via V2 (HVD) is correct ,it should
permit vapor from flower w/o tethering ,similar to O-Phos (wax/budder) ,which IMO makes
external cells almost obsolete ~
Hopefully ,this clears the air
Sc358
Thanks. That's not my understanding of it (hard to say really on something that doesn't exist yet....). I recall photos of a prototype a VV pass thru supply which means no on board battery as TV is currently doing on theirs. And if it does contain an on board battery like O-phos does I fail to see how that would be any improvement over the same battery without the feed thru function.
We'll probably have to wait to see what is finally offered, but I don't understand how an increase in performance can come from adding a pass thru function you're not using at the moment any more than it does on O-Phos and similar e-cig units presently. In those cases, it's the internal battery that determines performance.
The only way I know to get more power in such a scheme is to make it a corded vape....or go to bigger batteries of course.
Bummer, Bro, but your call for sure. I can understand you're not wanting to wallow with 'those guys' and try to compete in a cutthroat market with the 'revolutionary' modified e-cigs, please do stay at least a cut above them?
Excusing my ignorance, please, but what is "main stream HAT boards"?
TIA
OF