Arizer Solo

Zorbak

Zorbak

Active Member
Today I went fishing with a buddy, and naturally I brought along my Solo and PNWT. Fiddling with my fishing lure, I accidentally dropped my water tube 3 feet onto some rocks below. It made a loud TING! sound, but didn't shatter or even crack! My buddy and I couldn't believe it! I didn't catch any fish, but it still ended up being a good fishing day lol
 
530rasta

530rasta

Well-Known Member
yeah i have a m107 going strong, darn near two years straight of use everyday, multiple times a day.

I think my battery may be losing its charge holding capacity, but tbh, i dont notice a diff too much.

Ooo i get my fbomb in the post today! Perfect timing as the NBA season starts tomorrow. Not much beats vaping and bball to me hehe
 
Caligula

Caligula

Maximus
530rasta said:
yeah i have a m107 going strong, darn near two years straight of use everyday, multiple times a day.

I think my battery may be losing its charge holding capacity, but tbh, i dont notice a diff too much.

Ooo i get my fbomb in the post today! Perfect timing as the NBA season starts tomorrow. Not much beats vaping and bball to me hehe
Click to expand...
May I ask why you got the FB over the PNWT? Did you order it before the PNWT sale?
 
Caligula,
530rasta

530rasta

Well-Known Member
whats a PNTW?, ill buy one lol

edit- yeah i saw that just now, ill get one if i can get a link and a coupon code hehe thanks!
 
530rasta,
  • Like
Reactions: Caligula
Hexi

Hexi

Well-Known Member
Ultra Fine screens are the go-to screens for me currently with a PVHES GonG. Tried UF screens with non HE GonG and draw was way too restricted. Turns out it was the GonG more than the screen...
 
spoutti

spoutti

Well-Known Member
Hexi said:
Ultra Fine screens are the go-to screens for me currently with a PVHES GonG. Tried UF screens with non HE GonG and draw was way too restricted. Turns out it was the GonG more than the screen...
Click to expand...
At first, I used the stock pvhes screen and sucked a tiny bit of kief on my mouth and throat when loading my stem. I decided to switch to uf screen. But I needed to clean them oftently :ugh:. So switched back to larger screens; I suck less hard when loading my stem. I get a bit of kief, in my mouth only, when using bonedry materials.
 
GSH

GSH

On a Möbius plane
Put my Solo onto charge today and nothing. Just gives me the battery level by number of lights lit but no charge light. Still heated up too and worked on PA mode until the battery went completely dead :(

Have ordered a backup being delivered tomorrow, but want to get this one fixed too.

Any suggestions before sending it in for warranty repair?

TIA
 
Caligula

Caligula

Maximus
IDK if this is a question for the Solo thread or @Pipes but I've noticed that my Solo will throttle down to heat level 1 when using the AIO+ as a PA. Is this a problem anyone else has encountered? I thought it was maybe the auto timer but it happened quicker then 12 minutes apart the other day...

Kaptan said:
Here's the link
http://thevaporblunt.corecommerce.com/14-4-mm-Micro-shower-Water-Tool-Attachment.html
....and the code is PNWT50
Enjoy!
Click to expand...

@530rasta better get on that. Sale ends on the 31.
 
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
I have noticed the connection piece slips both on the big black thingy and sometimes with the stock one not the first one he made. So check the computer type power thing and push it in hard
Maybe I should try English. The connection of the big ass plug on the big black box is hinky sometimes. Push it in hard. Now if you have an L bracket in your stand you should be good, if it is the stock bracket it does slip. I am trying to use my old solution of velcro but I haven't gotten around to it.
 
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
The power brick is where I had the initial issue and still do. Any movement it loses connection. In the stand I think I explained it above but if you have his with the L bracket you are good on that end. Check you brick and figure out where to put it that it doesn't get pulled. I noticed cause the light was going on and off and still does unless I put it somewhere I can't pull on it at all.
 
530rasta

530rasta

Well-Known Member
fbomb is awesome. I dont like double percs though so I only fill the bottom and its getting me lifted highly. Some folks said on a thread here that they couldnt get the water out of the top part that easy..i just used some paper towel, slid it down there, and it sucked up the water no problem. Now I have a nice bottom perc with straight flow from there up to my head!

thanks for the heads up on the other glass but this is fine to me, cant see it being that different imho

han SOLOing
 
ataxian

ataxian

PALE BLUE DOT
Caligula said:
@530rasta better get on that. Sale ends on the 31.
Click to expand...

I like the PNWT and use it from time to time since receiving it.

Glad to own it however my ASH CATCHER with a SHERLOCK is my preference.

I think the 18MM GonG may give the effect I desire?

Some might like the 14MM GonG configuration better?
I made a few adjustments to use the PNWT.

After many trials I think if these type of water path (SOLO) is better with a 18mm GonG.

The F-BOMB with a 18MM and no logo would be the best option.

The PNWT is well made and most likely works better on the PINNACLE PRO.

It works OK with the SOLO.

Even the BLACK LEAF BUBBLER from PLANET VAPES works better than the PNWT.

I'll not an expert by any means.

These are just my own personal observations!


I use the double 18mm fitting to use the spare as a carb!
 
Caligula

Caligula

Maximus
I don't have an issue with the tube and the PVHES 14mm GonG... I do wish I got the Shorty though. But yes I'd prefer a Sherlock style top. I wish VB would make a GonG adapter for that.
 
Caligula,
  • Like
Reactions: Snappo
ataxian

ataxian

PALE BLUE DOT
Caligula said:
I don't have an issue with the tube and the PVHES 14mm GonG... I do wish I got the Shorty though. But yes I'd prefer a Sherlock style top. I wish VB would make a GonG adapter for that.
Click to expand...
So you think a 14mm GonG PHVES SHORTY?

Maybe I need to try that?
 
ataxian,
OF

OF

Well-Known Member
GSH said:
Any suggestions before sending it in for warranty repair?

TIA
Click to expand...

Try the new charger.

Good luck.

Caligula said:
IDK if this is a question for the Solo thread or @Pipes but I've noticed that my Solo will throttle down to heat level 1 when using the AIO+ as a PA. Is this a problem anyone else has encountered?
Click to expand...

They all do, at least the 3 I've tested do. They still time out for the same (safety) reason, but go to standby not off if in PA mode. It's a PA thing I think, not a problem.....a feature.

The on period can be less than 12 minutes, I convinced myself that the timing went from the time the cycle started, not from the time the level was raised. That is fiddle around dumping and reloading the stem and putting it back in while it sits waiting and you'll get a short session unless you unplug the PA and plug it back in to reset. From a programing standpoint treating it this way makes sense. You stay 'up' and just force it back to standby every 12 minutes.

OF
 
GSH

GSH

On a Möbius plane
Thanks @OF, I have tried the stock charger and a third party charger from Amazon that I have been using with Pipes CARPA, but neither work. Will try the new charger I get, but don't hold out much hope.

Would disconnecting the battery to "reset" it perhaps work? I might try that before sending in...
 
OF

OF

Well-Known Member
GSH said:
Thanks @OF, I have tried the stock charger and a third party charger from Amazon that I have been using with Pipes CARPA, but neither work. Will try the new charger I get, but don't hold out much hope.

Would disconnecting the battery to "reset" it perhaps work? I might try that before sending in...
Click to expand...

You're welcome, I agree if you've tried two different chargers a third isn't likely to help much.

Yes, I think a reset is worth a try since charging is under software control. If it were me, I'd probably swap battery packs as well?

Good luck.

OF
 
Pipes

Pipes

Addicted DIY Enthusiast
Accessory Maker
So I got my Spiral pre cooler today. I like it....
Just put in FRIDGE for 20 minutes and it really cools well.
Only did one session so far and it stayed cool through the whole double timer session.
Don't mind the 14mm as a mouth piece neither. Use the Gong strait like that all the time anyway.
Seems more then enough cooling for the Solo and in fact having thoughts if better then the WTs. We'll see.
P1050926_zps62fcd99b.jpg
P1050927_zps7f32eb73.jpg


It's a little heftier then the f-BOMB or PNWT. Still manageable with one hand but would keep the second hand around just in case...

P1050924_zpsbc4ce48c.jpg


Don't think I'll even risk the freezer as the fridge does just fine.
 
You must log in or register to reply here.
Top Bottom