Customized vape setups

t-dub

Vapor Sloth
Try the oxidizer first. Ventilation in this case is not a huge concern. Just make a super concentrated solution, keeping it off your body, and let it soak/dwell, and see what happens.
 
t-dub,

KushKlowdz420

Herbus Superbus
Look what daddy got!!!!

a033aef1.jpg


Matrix perc and it's about 12 inches tall. Basically a mobius knockoff. Only 170 so I couldn't pass it up. Videos to come :)
You have GOT to find a way to get that guy to ship that beauty to me in CA,man!
I know it can be done!
It MUST be done!
:love:
Do you think there are any left?
 
KushKlowdz420,

SD_haze

Well-Known Member
Try the oxidizer first. Ventilation in this case is not a huge concern. Just make a super concentrated solution, keeping it off your body, and let it soak/dwell, and see what happens.
Already soaking in the chlorine water
 
SD_haze,

t-dub

Vapor Sloth
Already soaking in the chlorine water
ok, was it a strong solution? What did you do? Chip up the trichlor pellet and dissolve it in hot water or something? Because getting an acidic enough solution is going to be difficult this way, safely. You could have done almost the same thing with bleach or dichlor. But thats good give it a soak and see what happens :)

The oxidizer is gonna get it :D
 
t-dub,

SD_haze

Well-Known Member
ok, was it a strong solution? What did you do? Chip up the trichlor pellet and dissolve it in hot water or something? Because getting an acidic enough solution is going to be difficult this way, safely. You could have done almost the same thing with bleach or dichlor. But thats good give it a soak and see what happens :)

The oxidizer is gonna get it :D
Might have messed up, does the trichlor require hot water to properly dissolve and create the acid? Used room temp purified water and chipped/stirred it real good in a separate container.
 
SD_haze,

shredhead

Specialist
You have GOT to find a way to get that guy to ship that beauty to me in CA,man!
I know it can be done!
It MUST be done!
:love:
Do you think there are any left?

That guys twin was takin a long long time a go. I think they only have double discs of that guy now. At the time of my purchase the owner of the shop said they were actually blown wrong and were supposed to have a flared mouth piece. So I have a feeling they were one of a kind. NeXt time I'm in that shop I will inquire.
 
shredhead,

KushKlowdz420

Herbus Superbus
That guys twin was takin a long long time a go. I think they only have double discs of that guy now. At the time of my purchase the owner of the shop said they were actually blown wrong and were supposed to have a flared mouth piece. So I have a feeling they were one of a kind. NeXt time I'm in that shop I will inquire.

Alright then, thanks for your help.
I think the mouth piece if perfect.
 
KushKlowdz420,

SD_haze

Well-Known Member
This is kind of the closest general glass thread we have so I'll ask here.

I'm considering picking up this showerhead tube for ~$165, but want to ask some other glass experts about this perc. The slits themselves do have an even height, which is critical for the perc to function properly, but you can clearly see some of the slits are a bit slanted (but not all of them)

Can anyone think of a reason for slanted slits to have a negative impact on function?

Other notes:
-Apparently the downstem can be switched out for a gridded one at request
-the 18mm female joint is a 9mm thick beast!
-50mm circ chamber & 25mm mouthpiece
-made in cali :-)

2vjr1v4.jpg


376723_502372989791773_306396036_n.jpg

549649_502372826458456_1739776370_n.jpg


Here's a shot of the tank joint on another, but very similar, piece.
5d1evm.jpg
 

SD_haze

Well-Known Member
Aww...looks like it was falsely advertised as 18mm. The tube IS 18mm, but the downstem reduces to a 14.
It didn't look that stable with the giant tank joint anyway!

Guess i'm back in waiting for an FC bub or devastator :popcorn:
 
SD_haze,

shredhead

Specialist
Damn dude... lay off the dabs. Look at how dirty that Recycler is!!! (though, you've got a few hits right there, @#$%'s on the sides, thick)
I double that! By the end i was laughing at how ridiculous it was. such big dunks.over and over again:lol::ko:
 
shredhead,

MarcellusWiley

Dab Trotter
Damn Marcus you have to bring that water level down on the DG! Holy shit though on the dabs!

yea for some reason my GF likes it with more water, the way it feels. I prefer it like a 1/4 inch above the frit lol. she was hittin that one in the video.

This took a little while to make too haha it wasn't like back to back to back...pretty close though :p within a couple hours!
 

runandvape

Member
uweDL.png

zbv2w.jpg

vayGH.png

My current set up. Used to have a SSV to DC like 4 years ago wish I still had my DC pieces. :(
vaping on some Cheese & Cherry AK mmj.
Tube is from High Priority, Sleek Designs with stemline direct injection perc.
I am aftraid to Dab - feel like it would jam my lungs up, but I'm bummed to be left behind on the coolest glass and what appears to be the most fun thing ever.
 

BigDaddyVapor

@BigDogJunction
I don't know about the most fun thing ever. Doing bong load style rips, off a Heat Island log vape and 22" custom tube, is pretty entertaining. :cool:

Nice setup, btw. Like the glass.
 
BigDaddyVapor,

shredhead

Specialist
I don't know about the most fun thing ever. Doing bong load style rips, off a Heat Island log vape and 22" custom tube, is pretty entertaining. :cool:

Nice setup, btw. Like the glass.
I got my underdog rippin' like that my friend. Its like one hitter snapper hits out of the bong but vapor! My ABV is dark dark brown if I rip it that hard. It makes me wanna get a tall piece just to see what it can handle (My tallest piece is only around 13").
 

Bouldorado

Well-Known Member
I put some tonic water in the fritted disc. You know... just because. Actually, the quinine in tonic water makes it glow under a blacklight. I bought the "diet" variation so the piece wouldn't get sticky from corn syrup residue (though it's washed out regardless). Makes for a pretty cool vape session in the dark:

 

runandvape

Member
Bday yesterdayso I went to goosefire gallery today and picked myself up this Hops x D Wreck Mayan 2012 thingy bubbler/oil rig/water tool. One of the headiest pieces I have ever owned. Im stoked to have it.
2EAkV.jpg

b8ziL.jpg
Ready for the DBV
RR84Y.jpg
Ready for a dab. I did try dabbing for the first time today. Too harsh, which sucks because it is kind of fun to play with a blow torch. I haven't done that since trying to use a glass wand with a big ass blowtorch in the dorms my freshman year of college.
 

SD_haze

Well-Known Member
Bday yesterdayso I went to goosefire gallery today and picked myself up this Hops x D Wreck Mayan 2012 thingy bubbler/oil rig/water tool. One of the headiest pieces I have ever owned. Im stoked to have it.

Ready for a dab. I did try dabbing for the first time today. Too harsh, which sucks because it is kind of fun to play with a blow torch. I haven't done that since trying to use a glass wand with a big ass blowtorch in the dorms my freshman year of college.
I cant imagine anyone heating their nail to the correct temperature on their first try, especially with a heavy blow torch. One of the worse aspects of using a glass/quartz nail (which i assume you have instead of titanium?) is its hard to pin point the perfect temp.

If you want to work with it though, when you find that sweet spot (with clean oil) it isn't very harsh at all.
 
Top Bottom