Zeal, Ω, and Epitome

[Likun]

I got an Omega two weeks ago (my first ball vape) and I had the same questions so I should be able to answer a few of them:



You can leave it on all day, no need to turn it off.



Yes. It’s basically your ultimate on demand vape. Just leave it in the coil and use it whenever you’re up to.



I don’t have one yet but plan to get one of these beauties:

Micro Diffuser 18mm - Zebrawood | DFreeZ Designs

Style: Male Micro DiffuserCloud Connoisseur’s Zeal & Omega Compatible!Cannabis Hardware B1, F22 & Mary Compatible!Vapvana Screwball Compatible!USPS Priority Tracked ShippingIncludes2 1/2” ScreensThis is a micro-dose Male Bowl. It will hold roughly .10 to .15 of a gram. Each bowl is waxed and...

www.dfreezdesigns.com

I think @coolbreeze has one and recommended it here somewhere.



Start at 500f/260C and work your way up. I’m at 560f/290C with the 22mm diffuser module.

1. It can run all day if you like.
2. Yes, leave it in the coil
3. You can use a 14mm adapter with a screen in the grind for the 14mm injector, otherwise the JoDa Couch Log bowl is fantastic. The glass diffuser bowl also does small loads really well, but it must be a screen-covering.
4. I run my diffuser lowish, like 450F and the injectors higher, maybe 480-520F.
5. Depending on your setup, one of the gooseneck Cobra coils can be useful.

I know you'll enjoy it, so have fun!


Good call!

Edit: there are a million options for heating stands, some sort of artisan, some from camera parts, some very cleverly devised at home. If you're the creative type with the necessary gear the world's your oyster, otherwise it's easy to find a cheap and simple solution.

Thanks you so much!

I had quite fun trying the omega last night. It worked pretty well with .05-.1 g material flatly layed out in the glass injector.
I guess I'll have to do some more testing with different temperature settings and draw speeds.

I did a quick & dirty stand to use it wireless. Had to abuse a dynastash for it but works pretty well .
Now I just desperatly need a proper handle. And I have no idea how the injector works but I'll figure that out eventually.

https://imgur.com/tdNS7uR

What is this thing for?

Omega Multiplier set

Top cap and main body adapter to use with extra Omega adapters.

cloud-connoisseur.company.site

 

[coolbreeze]

Thanks you so much!

I had quite fun trying the omega last night. It worked pretty well with .05-.1 g material flatly layed out in the glass injector.
I guess I'll have to do some more testing with different temperature settings and draw speeds.

I did a quick & dirty stand to use it wireless. Had to abuse a dynastash for it but works pretty well .
Now I just desperatly need a proper handle. And I have no idea how the injector works but I'll figure that out eventually.

https://imgur.com/tdNS7uR

Nice!

What is this thing for?

Omega Multiplier set

Top cap and main body adapter to use with extra Omega adapters.

cloud-connoisseur.company.site

That's so you can set up more than one heater at a time. You'd need two add'l handles, rings, and multipliers, as well as balls, and then all three of the nozzles can be ready to use instead of having to switching them out each time.

 

[Likun]

I've been having some fun days with the omega. It works pretty well with the glass diffuser bowl even with loads as small as .03g. BUT I have the feeling that there are better options. The burn is not totally even, the edges don't get as dark. Also if I'm not using a super coarse grind smaller pieces tend to fall through the glass screen.

Bow options I've found available in Europe:
- Shovelhead (~ 80 €)
- Shovelhead Knockoff from Ali (23 €)
- Screwball Micro Hybrid Bowl (50 €)
- Glass diffuser bowl with ss screen from China (13 €)

Would these even be compatible with the Omega?
Tbh judging by the pricing the OG Shovelhead seems the least appealing... Any recommendations, especial for loads .05 - .1?

 

[Shit Snacks]

I've been having some fun days with the omega. It works pretty well with the glass diffuser bowl even with loads as small as .03g. BUT I have the feeling that there are better options. The burn is not totally even, the edges don't get as dark. Also if I'm not using a super coarse grind smaller pieces tend to fall through the glass screen.

Bow options I've found available in Europe:
- Shovelhead (~ 80 €)
- Shovelhead Knockoff from Ali (23 €)
- Screwball Micro Hybrid Bowl (50 €)
- Glass diffuser bowl with ss screen from China (13 €)

Would these even be compatible with the Omega?
Tbh judging by the pricing the OG Shovelhead seems the least appealing... Any recommendations, especial for loads .05 - .1?

Is the Vulcan bowl not in stock currently?

 

[Grass Yes]

Also if I'm not using a super coarse grind smaller pieces tend to fall through the glass screen.

I always put a mesh screen over any honeycomb glass screen now. I like the performance better and it keeps things cleaner.

Bow options I've found available in Europe:
- Shovelhead (~ 80 €)
- Shovelhead Knockoff from Ali (23 €)
- Screwball Micro Hybrid Bowl (50 €)
- Glass diffuser bowl with ss screen from China (13 €)

I don't know much about the options in Europe. My personal favorite is the SS mesh screen bowl from Cloud Connoisseur but that obits was own would be pretty expensive to ship to you.

The shovelheads both work great. I don't know about the micro bowl from Vapvana. The original bowl was terrible and would stick to the vape.

Avoid that last glass bowl as it is too large and could easily become stuck in the diffuser and break.

 

[Likun]

Is the Vulcan bowl not in stock currently?

I always put a mesh screen over any honeycomb glass screen now. I like the performance better and it keeps things cleaner.

I don't know much about the options in Europe. My personal favorite is the SS mesh screen bowl from Cloud Connoisseur but that obits was own would be pretty expensive to ship to you.

The shovelheads both work great. I don't know about the micro bowl from Vapvana. The original bowl was terrible and would stick to the vape.

Avoid that last glass bowl as it is too large and could easily become stuck in the diffuser and break.

Vulcan is a interesting call. I would just need that https://cloud-connoisseur.company.site/Vulcan-Bowl-Omega-Adapter-p622061361 right? Screws right in to the injector piece from the omega?
It's a little bit annoying that shipping is 29 $ while the Vulcan itself is 13 $ but anyways still reasonable cheap in comparisson.
I'll try that or the knockoff shovelhead I guess.

Edit: I just saw that a I'd need a wireless ring, which is out of stock, to use it with a handle though.

 

[Grass Yes]

Vulcan is a interesting call. I would just need that https://cloud-connoisseur.company.site/Vulcan-Bowl-Omega-Adapter-p622061361 right? Screws right in to the injector piece from the omega?
It's a little bit annoying that shipping is 20 $ while the Vulcan itself is 13 $ but anyways still reasonable cheap in comparisson.
I'll try that or the knockoff shovelhead I guess.

Vulcan is really fun especially if you have a second PID controller to heat it.

If you do order the Vulcan I strongly recommend throwing one of the mesh screen glass bowls in your cart. It's nothing like that glass screen bowl you have. It's my favorite bowl with any diffuser.

 

[Likun]

Vulcan is really fun especially if you have a second PID controller to heat it.

If you do order the Vulcan I strongly recommend throwing one of the mesh screen glass bowls in your cart. It's nothing like that glass screen bowl you have. It's my favorite bowl with any diffuser.

I was thinking about that too but unfortunately it seems like all of them are sold out..

 

[coolbreeze]

It's my favorite bowl with any diffuser.

Yeah, it's really good. It's a nice size for a diffuser too, not too big.

 

[Grass Yes]

I was thinking about that too but unfortunately it seems like all of them are sold out..

That's a drag. I thought there were a few colors in stock but I guess they all sold. Looks like the clear version has a preorder but I don't know anything about the details on that.

 

[Joshtownsend]

i got my epitome in today. i got both glass bowls. the metal screen one is thicker so it's holds less and is more like a microdose. I wonder if tinymight basket type screen would fit in it.

i think the crossing matrix should work good for titanium and it's only 40 at vgoodiez.

love it so far. can't believe those screens hold the rubies in as good as they do. 12 days to get here.

 

[Likun]

That's a drag. I thought there were a few colors in stock but I guess they all sold. Looks like the clear version has a preorder but I don't know anything about the details on that.

It's stated as "THIS IS A PREORDER/RESERVATION WITH PROCESSING ETA OF 7-10 BUSINESS DAYS FROM ORDER DATE."
Thanks for the hint, I'll just place my order for that

 

[leanpubpackage]

Anyone know the thread size of the omega handle?

 

[TedJones]

Anyone know the thread size of the omega handle?

10-24 thread. Same as the CH handles for shovelhead bowls and wireless heads

 

[littlebabybleu]

Does anyone know if Ed's TnT coil handles fit on the Epitome?

 

[onesixty2]

Does anyone know if Ed's TnT coil handles fit on the Epitome?

Coil handles? No. The Epitome is wireless, there is no way to attach a coil handle to a wireless head without your own DIY.

 

[Grass Yes]

Does anyone know if Ed's TnT coil handles fit on the Epitome?

As @onesixty2 pointed out, there is no handle on the coil in the Epitome set up, but Ed's bowl handle will work if you have a good heat sink. I think he made some wireless handles as customs as well, but I can't find the Instagram post now.

 

[datayoda]

Can someone DM me the right CC discord? Please!

 

[datayoda]

Can someone DM me the right CC discord? Please!

Ok. Got it THX!

 

[Joshtownsend]

same here. can i get the discord

 

[PizzaWizard]

I've been using my omega a lot again recently. I always seem to use mine at lower temps than most people say. 480 is my usual temp but I've been pushing it even lower. 440 still gives decent hits and I get much more sativa like effects. I am going to try even lower. I recommend trying it out if you haven't .

Way back in the day I used to do the same thing with a box and whip style vape. Just trying to get the lowest temp possible for more uplifting effects. I remember some of my friends being shocked at how different the effects were. Good memories lol.

 

[El Duderino]

I've been using my omega a lot again recently. I always seem to use mine at lower temps than most people say. 480 is my usual temp but I've been pushing it even lower.

Same here. My usual temp was 550 until @coolbreeze said he was using it at 450 or something. Now I’m at 480 too (for the diffuser) and enjoy it a lot dry with a U-Hook.

440 still gives decent hits and I get much more sativa like effects.

Sounds great, gonna try that.

 

[TedJones]

What bowl(s) are you guys using for those lower temps? I’ve bumped up and settled at 585 for the thick CC glass one to get the abv a little brown in it

 

[PizzaWizard]

I have suspected my coil reads low actually so maybe that explains it. I have almost combusted at 550 so it seems off.

 

[howie105]

A user comment on using Omega with a glass bowl at 390 f to 470 f on a small 50 ml globe with .04 g load provides two to three hits. At the lower temperature range I am using the glass dry and at the upper end I add some water.