Multi-brand Xmax V3Pro vaporizer, convection, on-demand&session.

kokolokokolokon

Well-Known Member
Yes, I use them all of the time. They also fit in the Roffu. My ABV doesn't come out as dark, but I still get nice sized clouds. The amount of material that fits in the capsules is just right for me.

Just make sure you clean them before use. I forgot to and I got some bad machine oil taste on my first few sessions.
Nice! Thanks! Did you try the fury caps to compare? I have the fury cos but i feel i can get the same results
 

XMAXVAPORIZER

Well-Known Member
Manufacturer
Hi FC Family, I'm sorry but my Internet is still not repaired, all peoples in my area are getting the same issue, I'm right now connected through 4G but it's not reliable. That's why you didn't saw me so much recently.
Warning: compressed canned air contains added bitterents that are toxic, do not use it to clean any vape parts!
Yes I was advised by our engineers to NOT use compressed air can. Although they recommended the following cleaning solution for the peoples thinking some dust/resin passed through the bottom chamber's screen, pretty interesting: "V3 PRO heating cup cleaning can be sprayed with a bit alcohol, leave it for a while, and then keep it upside down and wipe it. The way won't damage the other components of device."
Thanks for the answers.

For the bolded part, so to get the maximum number of hits for bowl is better a coarse grind or even a whole mini-nug?
Hi, yes a whole small nug or broken by hands works very well for me, hits are slightly less dense but you'll get many hits and it's impressive how much the abv is whole colored, even using a dense full little nug!
Medium grind is best for everything, I haven't tried a whole nug here, but I don't think it would be ideal, if you want full extraction you're going to have to break up the nug eventually... Consistent medium grind :tup:
Give it a try! It works... and like I replied to @GymWolf , the abv's color shows the extraction level... full brown!
:tup:
The new dosing caps must be good as I am still using them! They may give a slightly shorter sesh but they keep things nice and clean...quick hot swaps are also handy when watching a movie, no distractions!
I have suggested Xmax offer them in a double-end opening tube/keyring type storage for easy quick swaps when on the go...they are looking into it.
Thank you for confirming how much the capsules work well and I'm glad you suggested a better carry case for the dosing caps to our team!
Hello got the V3 since some days and i'm liking it so far!

Only problem I have with it is it doesn't consume all the ABV in an even way. ABV usually is dark in the middle and not that much used around it.

Is there any mod to make air go though all the chamber ? I'm pretty sure the problem is the tip, I am using it stock and the hole with the grill is rather small which make me think this is what is causing the problem...
Hi, I represent here the Xmax brand, I'm glad you like your V3Pro! This is a convection based device, this is means you must to pack it differently than conduction based vaporizers, loose and not fully loaded (in opposition to full packed down chamber used in regulars conduction portables vaporizers). I believe this advice and the one from @Shit Snacks about to moderate your draw will help you to get a fully browned chamber, I'm sorry to say but it's not a design flaw but a user error... but I did it myself for my first V3Pro bowl a while ago.
Yeah it would be nice if it didn't include the heat up time in that 30 seconds...
Oh yes, it's something we can do I believe, I'll transmit your suggestion to remove the heat-up time from the 30s on-demand hit's time length. We are always trying to improve units based on customers feedbacks, have fun!
I agree, and I must take long draws because this shut-off timer has kicked in for me a few times.

One way to mitigate or work around this might be to hold the button until it reaches your selected temperature, releasing the button and then immediately pressing it again to re-start heat up. The second heat up time should be a little shorter, and give you a little more draw time (I'm sure you know this, but may help others).
Nice trick but we'll consider the @Shit Snacks suggestion about to remove the heat-up time from this 30s, thank you for sharing your experience!
Yes, I use them all of the time. They also fit in the Roffu. My ABV doesn't come out as dark, but I still get nice sized clouds. The amount of material that fits in the capsules is just right for me.

Just make sure you clean them before use. I forgot to and I got some bad machine oil taste on my first few sessions.
Mines fit the Roffu but the top lid doesn't fully close cause the capsule's top rise above the Roffu's bowl... that's why I didn't tested. I'm surprised you said to get a bad taste, I still recommend a little cleaning (quick iso wipe is enough) but I did a test with 2 caps and one was cleaned with iso prior to be loaded while the other wasn't cleaned at all before... I didn't noticed any difference although I'm aware sensitivity depends the people.
So I’ve now used the V3 since november, my first vape. I’ve tried a friends vapes, a hard hitting corded vape and a mighty? or something similar. And I love this little vape, just perfect for me.

I’ve skimmed through the thread, a lot to take in..! But saw discussions about the mouthpiece screen. I know of a good replacement screen, not sure if anyone else already shared this..! There is a screen in the wax cup you get with the V3 (I’ve never used the wax cup) . That screen fits after bending the edge around. so I tried it out, not sure I felt a difference but I’m keeping it there for now.

Ive also used capsules since day one, fury edge capsules. I have now 3 tubes,filled with 3 diferent strains at the moment (anyone wanna guess which):

Since I use calpsules I have also used the V3 without a mouthpiece screen, less resistanc!
Hi, I'm so glad you joined this forum and put a foot in the vape zone with our last Xmax V3Pro! I represent here the Xmax brand, feel free to contact me for infos, tips&tricks or support. Thank you for sharing your tricks, i'm still using myself the OG filter screens in my devices but I'll give it a try soon. Although I noticed my last Very Peri V3Pro is coming with a slightly different filter disc/screen, it looks like it offers more holes and a thinner screen, yes we are continually improving devices based on your feedback.
Nice! Thanks! Did you try the fury caps to compare? I have the fury cos but i feel i can get the same results
Here the benefits of the Xmax dosing caps:
- perfect fit, this is means no hot air bypass the load going between the dosing caps wall and the chamber's wall.
- slightly wider, slightly taller also, this is means more room for your herbs!
 

XMAXVAPORIZER

Well-Known Member
Manufacturer
Do you know what EU shops have these caps? (Non UK)
Sorry but the only one selling our dosing caps is in UK... at the moment!

We hope more EU retailers will sell them soon!

Thank you for the info @redmachine , this is avoid mistakes. This Jackpods looks similar to the ones I got with my Glow RCV V3, too big for the Xmax V3Pro for sure!
 
Last edited:

redmachine

Well-Known Member
I'm going to buy this dosing caps, I think they will work. This is the only EU shop I can find this caps

 

Tweakz

Well-Known Member
now it's my turn to try this thing, being the owner of two TM's and a Hopper IO, I can confidently say that V3 Pro really suited me and even liked it, especially with all the tips & tricks (cover air holes, etc.) (thanks to everyone for these tips ) . I was skeptical at first, but purchased it , cleaning it up ,and then I got nice clouds and a smooth dark abv. I agree with all the many recommendations for this find.


54-F2-E741-6931-49-B4-AD3-A-DE06314-C9-FCB.jpg
 

Petetbay

Well-Known Member
Sneaky Pete has the Xmax V3Pro caps in stock in the Canadian store and US store has them listed but not in stock yet.


 

23jim

Member
Tired of dealing with my crafty+ battery failing and also my ArGo draw resistance. Considering this but I have a high tolerance (need two caps for my crafty) will I be disappointed in this?
I know Tiny might has more fans but I am afraid my tolerance will go through the roof with that (I have little discipline apparently)
 

Petetbay

Well-Known Member
I know Tiny might has more fans but I am afraid my tolerance will go through the roof with that (I have little discipline apparently)
It’s a pretty cheap alternative compared to a Tinymight especially if you can get it on sale. The bowl is small but does a pretty good job extracting and you can’t beat the replaceable battery. Something a bit bigger that I like is the HR Rogue bigger bowl, great taste and excellent draw, but not available everywhere and built in battery though pretty big. :2c:
 

23jim

Member
I should add my 1st thought for a new vape was the Arizer Air Max but I saw a few reviews that made it basically sound like it performed like a Solo 2. Not sure that wouldn't be a down grade from what I was used to with Crafty (although I would prefer the ease of cleaning)
 

Robert-in-YEG

Well-Known Member
now it's my turn to try this thing, being the owner of two TM's and a Hopper IO, I can confidently say that V3 Pro really suited me and even liked it, especially with all the tips & tricks (cover air holes, etc.) (thanks to everyone for these tips ) . I was skeptical at first, but purchased it , cleaning it up ,and then I got nice clouds and a smooth dark abv. I agree with all the many recommendations for this find.


54-F2-E741-6931-49-B4-AD3-A-DE06314-C9-FCB.jpg
I haven't said anything about the V3 Pro for some time. After a year of vaping, after months of sitting unused, I pulled out the V3 a week ago, and I've used it more in the past few days than any time in the past. The one thing that I am now convinced of, is that no one vape can do all. Every flower is different, every day is different, and we are all different.

The Fog Pro was always my preference, but that preference hasn't met the test of time. Over the months, there really has been no pattern. Most times I choose conduction, but convection vapes are so easy to draw. There is lots of reading here on FC about conduction versus convection. Bottom line, convection makes for a nice relaxing session. As of late, the Fog Pro is sitting idle, and the V3 Pro seeing active daily use.

Back to the Pro, some flower in the V3 vapes wonderfully; it gives great taste and reasonable effects. The shape isn't my favourite, but it is functional. The mouthpiece works for me. I've never found it hot or unpleasant in any way.

When I think about the price of this unit, sitting around $100CAD, it is a bargain. Consider the mouthpiece as disposable (under $10), but if you don't soak it in ISO, the mouthpiece lasts a long time. If the magnets come out, don't mix them up. If the magnets keep coming out, it is time for a new mouthpiece.

Robert-in-YEG
 

23jim

Member
OK. I think I am sold (unless the Tiny Might allure captures me - I am trying to keep my tolerance from going any higher though, so it probably won't. At least now).

What are the necessary accessories? Does the WPA make the glass stem unnecessary? What dosing capsules work best?

I like to vape below benzene production levels (392 F). It looks like 380 I'd good temp.
 

23jim

Member
I very much doubt it, you will also enjoy less time cleaning and have the ability to load, heat and consume a microdose in the time your old vape takes to warm up. You can also load more than a microdose in the V3 and enjoy a session...pretty versatile with different glass accessories too.
Thanks all. Just ordered from POTV with glass WPA and a set of dosing caps.
 
Top Bottom