Vapman

[Dr. G]

Hello guys!
Short update, vapman 2.0 is ready soon, only a few days left
Regarding the station, we are still in production, it takes so long, and there are so many steps... but we will soon send you an email out with the final launch date and payment link!


all the best
David and Michael

Thank you David and Michael...regards to Rene!!!!!!!!!!!

 

[kokolokokolokon]

hello people! Recently I acquired a second hand Vapman classic. Great device for traditional hash!!! Easy to use and the pear wood gives a special smell to the hash

i was worried about cleaning since the mouthpiece is a little…mmm..dark, and the oven looks a worn out. What do you think?

https://imgur.com/a/3Hpuoa6

oh! And looking at the simrell mouthpiece for the vapman i just used a revolve gen 2 with the secondary cooling unit and 2 orings to make this mod and keep more path clean!

https://imgur.com/a/k9Z6gZ4

Anyone knows if the new stem piece to prevent it to the dirt is compatible with the old stem?

 

[Electrofever]

i was worried about cleaning since the mouthpiece is a little…mmm..dark, and the oven looks a worn out. What do you think?

Acetone should do the job for the wooden midsection. I just went through there, and after 1 hour in acetone it came out really nice. For the pan, magic eraser can be used, or the mustard tech, as mentioned a bit before. Or maybe just buy a new pan ?

oh! And looking at the simrell mouthpiece for the vapman i just used a revolve gen 2 with the secondary cooling unit and 2 orings to make this mod and keep more path clean!

Nice mod

Anyone knows if the new stem piece to prevent it to the dirt is compatible with the old stem?

The new stem, as you say, is the entire midsection, eg. the metal filter (which clips on and off), the wood section (now lined with metal) and the mouthpiece. So, if you are speaking of the metal filter, no the new one won’t be compatible with old ones. But the new full midsection is compatible with old VM, Italian made.

Once again, anyone correct me if I’m wrong

Edit : I finally discovered, obviously by reading someone explaining so, how to do multiple quotes !

 

[kokolokokolokon]

Thank you @Electrofever !

Acetone should do the job for the wooden midsection. I just went through there, and after 1 hour in acetone it came out really nice. For the pan, magic eraser can be used, or the mustard tech, as mentioned a bit before. Or maybe just buy a new pan ?

I have to buy acetone! I did read it on here but later i read the acetone is bad for wood.
The pan isn’t really dirty. Is more like scratched, and i dont know ir it is ok or i should buy a new one as you say

 

[simba]

Thank you @Electrofever !


I have to buy acetone! I did read it on here but later i read the acetone is bad for wood.

I've read mixed things about using acetone, although I know there are quite a few people on here that use this method.

 

[jbm]

I've read mixed things about using acetone, although I know there are quite a few people on here that use this method.

I’ve done one relatively short (I think less than an hour) acetone soak of an olive wood midsection. It came out very clean and dried rapidly. I’ve also tried the magic eraser on a pan with decent reaults, though the abrasion makes me think I might not do that again. I’ve also had decent results swabbing a pan with Dark Crystal.

 

[cx714]

Is more like scratched, and i dont know ir it is ok or i should buy a new one as you say

The pan’s core should be pure copper under the gold plate. There’s been a lot of lively discussion here about whether copper is a safe material, so as always, flip a coin and trust your feelings.

(The pans of the OG classics aren’t supposed to be user serviceable… I take it you have an Italian-made Vapuomo? If you can get the pan out, you might as well put a shiny new gold one in.)

 

[kokolokokolokon]

The pan’s core should be pure copper under the gold plate. There’s been a lot of lively discussion here about whether copper is a safe material, so as always, flip a coin and trust your feelings.

(The pans of the OG classics aren’t supposed to be user serviceable… I take it you have an Italian-made Vapuomo? If you can get the pan out, you might as well put a shiny new gold one in.)

I have a classic one from italia. Well i bought right now a new pan since, for what i know, copper is not safe, and the one i have is scratched af

 

[Radwin Bodnic]

Easy to use and the pear wood gives a special smell to the hash

I have a classic one from italia.

Italians Vapman (still not totally sure about the plural form) were never made in pear wood. Yours look to be a very lightly figured olive wood.

Well i bought right now a new pan since, for what i know, copper is not safe, and the one i have is scratched af

That was the right thing to do imho.
But if you have the time to, I suggest you to try to clean the old pan to see if it's really that bad. The black layer could be a lot of burned resin (but could be the zinc layer needed between copper and gold plating).

Did you bought the new midsection as well ?

 

[El Duderino]

I have just received the shipping confirmation for my VM2. I will report and post photos as soon as I have received the device.

The excitement is rising...

 

[Tji89]

Is mouthpiece included in the Vapman 2.0 kit?

 

[El Duderino]

Is mouthpiece included in the Vapman 2.0 kit?

A stainless steel mouthpiece is included. Glass or WPA are sold seperately.

Here's what's inlcuded (from their page):

- vapman 2.0
- standard case (transparent)
- filling funnel
- cleaning brush
- concentrate screen

Vapman 2.0 - Olive

Vapman is the flavor chaser in our family; its 18k gold plated, vok shaped copper bowl delivers thorough, even extractions that activates all of the amazing flavors and properties of your herbs & concentrates

nowinhale.com

 

[kokolokokolokon]

Italians Vapman (still not totally sure about the plural form) were never made in pear wood. Yours look to be a very lightly figured olive wood.

My bad, it has to be olive wood

That was the right thing to do imho.
But if you have the time to, I suggest you to try to clean the old pan to see if it's really that bad. The black layer could be a lot of burned resin (but could be the zinc layer needed between copper and gold plating).

I didn´t know there is a zinc layer between the gold and the copper. Anyways what you see in the image i shared is the pan cleaned with iso, qtips and hot water...so there is no black layer maybe the image is a little dark. I tried to do a deep cleaning without damage the pan

Did you bought the new midsection as well ?

Yes, i like the chance to clean the path well...but without moutpiece (i will adapt the revolve direct tube i think). I could get a medal to stupidity since it will be like a v2 without mouthpiece but more expensive

 

[Woolf]

Shipping time!

Arriving on thursday

 

[Andreaerdna]

just aware of vapman 2.0.
Very interesting what they did on midsection but I can’t find the basic one, the one without mica layer. is it still an option for 2.0?

 

[El Duderino]

just aware of vapman 2.0.
Very interesting what they did on midsection but I can’t find the basic one, the one without mica layer. is it still an option for 2.0?

Not at the moment according to the creators. They’ll consider it though if the demand continues.

 

[Andreaerdna]

Not at the moment according to the creators. They’ll consider it though if the demand continues

I really hope so
my first one was with mica but it is the only one I am not using anymore

 

[jbm]

I really hope so
my first one was with mica but it is the only one I am not using anymore

It seems odd that they’re considering abandoning the pure.

 

[Texus]

It seems odd that they’re considering abandoning the pure.

May not have sold as well...

 

[vapman]

The pan’s core should be pure copper under the gold plate. There’s been a lot of lively discussion here about whether copper is a safe material, so as always, flip a coin and trust your feelings.

The supposedly lively discussions were basically just rumors or conjectures from people who were never able to provide any solid evidence after 20 years!
Copper oxide can't be inhaled because it simply doesn't exist in gaseous form. Copper is an essential element of the human body and most living creatures!
Copper is humanity's longest-used metal and is found in thousands of everyday items. The probability of absorbing copper oxide through using the vapman is zero! If 10,000 years of testing isn't enough, then what? How long have artificial materials used in vaporizers been on the market?

Nobody has to trust their feelings simply because copper is proven to be safe!


I wish everyone a lovely day,

René

 

[cx714]

Copper is proven to be safe!

I don’t disagree (although materials safety discussions aren’t allowed in product threads), nor was I implying that you as the inventor didn’t do your due diligence.

When these debates do arise, they’re quite polarizing and do little to sway the opposite camp. Anecdotes, facts, and links to (often tangentially-related at best) research abound on both sides.

In the end, as consumers, we just have to pick a side and act accordingly. (But, in the OP’s case, he also had the option to simply replace the pan.)

 

[Slide-Easy]

For those of you who question the safety of copper, why not just forget about a Vapman and move on? Why continue your lively debate? Rene' told you all the truth. Plenty of plastic and aluminum vapes out there for you to enjoy.

 

[kokolokokolokon]

The supposedly lively discussions were basically just rumors or conjectures from people who were never able to provide any solid evidence after 20 years!
Copper oxide can't be inhaled because it simply doesn't exist in gaseous form. Copper is an essential element of the human body and most living creatures!
Copper is humanity's longest-used metal and is found in thousands of everyday items. The probability of absorbing copper oxide through using the vapman is zero! If 10,000 years of testing isn't enough, then what? How long have artificial materials used in vaporizers been on the market?

Hello Rene! Great vape for hash! And…are you saying i just bought a new pan…for nothing? I would have bought a new mouthpiece + helix!

 

[Electrofever]

Hello Rene! Great vape for hash! And…are you saying i just bought a new pan…for nothing?

No, your vapman will look brand new and you can still buy the new mouthpiece a bit later !

 

[Woolf]

My vapman 2.0 arrived. Works great. What i didnt notice on the Website - there is no longer a storage compartment for the sieve in the Wooden case.
Not a Problem, just be aware of
Nice greets