Username88
New Member
Same I love the flavor and simplicity of this one. I got the dani f2 and the vaphit x and really enjoying swapping the cooling components of these 2 vapes.
Vaphit Quartz Cap -
- Thread starter Perfect_Speed4069
- Start date
-
- Tags
- convection portable
Timps27
Feel like I’m winnin’ when I’m losin’ again
Cross-posting:
www.vaphit.com
I mainly use my VH on dry pipes, I like the addition of a quartz bowl!
Vaphit QOQ
If I hadn't sorted my VAS, I'd be all over this. https://www.vaphit.com/products/vaphit-qoq-kit Looks like an excellent addition to the Vaphit lineup, although a little more expensive than their previous offerings. Has anyone any experience yet?
fuckcombustion.com
Vaphit full QOQ Kit with Wooden Tray
The Vaphit QOQ features an all quartz bowl and cap. Featuring no metal touching your material, the QOQ provide the best flavor experience yet! The two titanium collars offer ease of disassembly and cleaning. The larger collar is secured using two large O-rings which the heating cap press fits...
www.vaphit.com
I mainly use my VH on dry pipes, I like the addition of a quartz bowl!
coolbreeze
Well-Known Member
lol.
Perfect_Speed4069
I am the beetle in a box that only you can see
Curk. The umlaut is invisible
Timps27
Feel like I’m winnin’ when I’m losin’ again
You know, now that I look at it a tad closer, the bowl out on the end with now a hollow glass quartz tube ‘inside’ the quartz heater tube…I wonder if you heat down low by the intake holes, will that internal tube heat up enough to create a mini-Electropath style heated chamber for the vapor to pass through?
I’m not saying it would be anywhere on the same level, mostly tongue in cheek…
I’m not saying it would be anywhere on the same level, mostly tongue in cheek…
SlickHenry
Well-Known Member
Regularly use my Vaphit X but funnily enough completely forgot there are two quartz heaters in the kit 
. So far have only used the smaller one. How does the thicker heater compare? What heater do you use?
. So far have only used the smaller one. How does the thicker heater compare? What heater do you use?
SlickHenry
Well-Known Member
First reviewCross-posting:
Vaphit QOQ
If I hadn't sorted my VAS, I'd be all over this. https://www.vaphit.com/products/vaphit-qoq-kit Looks like an excellent addition to the Vaphit lineup, although a little more expensive than their previous offerings. Has anyone any experience yet?fuckcombustion.com
Vaphit full QOQ Kit with Wooden Tray
The Vaphit QOQ features an all quartz bowl and cap. Featuring no metal touching your material, the QOQ provide the best flavor experience yet! The two titanium collars offer ease of disassembly and cleaning. The larger collar is secured using two large O-rings which the heating cap press fits...
I mainly use my VH on dry pipes, I like the addition of a quartz bowl!
Sour Dream
Blue Dream enthusiast
Which one is thicker or are you talking about the newer x versions vs the oldRegularly use my Vaphit X but funnily enough completely forgot there are two quartz heaters in the kit
Username88
New Member
The vaphit x quartz caps
If slick got the vaphit x kit then it comes with 2 thick glass caps, one has 1mm holes (for sipping) and the other 1.5mm (for ripping).
I've tried all 4 types and I do prefer the 1mm thick x cap but the difference between the is not too noticeable imo.
The vaphit x quartz caps are made with thicker glass than the regular so they hold heat a bit better.
If slick got the vaphit x kit then it comes with 2 thick glass caps, one has 1mm holes (for sipping) and the other 1.5mm (for ripping).
I've tried all 4 types and I do prefer the 1mm thick x cap but the difference between the is not too noticeable imo.
_Eladamri_
Member
do you have a version 1 (without the star piece in the stem) ? Would you recommend it also (if i were not able to get a v2?) ?
Timps27
Feel like I’m winnin’ when I’m losin’ again
What’s better than a quartz cap? Two quartz caps! Enjoyable vape on the Prophet, their wood ashtray finally came in stock too. I can’t tell what wood it is but it’s a little lighter than I was expecting. Handsome and functional, nice debowler spike.
Sour Dream
Blue Dream enthusiast
Anyone have issues with their cap cracking, just happened when I put it on, not sure if it’s safe to use with heat
maremaresing
Well-Known Member
I've not had any caps break but, given that the glass so thin, I expect them to be ephemeral. Under no circumstances should you keep using that. Do you have spares?
Sour Dream
Blue Dream enthusiast
Yea I have the other cap with the smaller holes thanks
dukes00
New Member
I've just got the QoQ yesterday and was curious if anyone here has it? The first hit was very tasty, but honestly not much better than what I get from my TM2 (maybe I just had my expectations way too high, considering it's a 1/5th of the price). Has anyone managed to get a one hit extraction with it (or just has general guidance on how to get that with quartz TEDs)?
SlickHenry
Well-Known Member
I am still waiting for my QOQ but I have the X and terpcicle so feel fairly confident in terms of heating. I would say start with a smaller torch (small blazer or double/triple pocket) and start heating near the intake holes and slowly up and down whilst turning. Keep the flame a little away from the quartz in order to gradually build up the heat. You can either wait for the flame to go yellow and then heat for 3-5 more seconds or a more accurate method is to look for when the herbs start to turn golden brown and then stop.
That should be pretty close to one hit extraction. Beware the heat takes a little while to transfer from the heater to the bowl so it is possible to overdo the heating. Take a test puff to see where you are after waiting a few seconds.
I don't have a TM2 but the fact that it is so much cheaper and you are saying flavor it is a little better is pretty good.
That should be pretty close to one hit extraction. Beware the heat takes a little while to transfer from the heater to the bowl so it is possible to overdo the heating. Take a test puff to see where you are after waiting a few seconds.
I don't have a TM2 but the fact that it is so much cheaper and you are saying flavor it is a little better is pretty good.
Last edited:
SlickHenry
Well-Known Member
Delete duplicate
Sour Dream
Blue Dream enthusiast
Wesley is gonna send me a replacement cap which is great
budski
cantre member
I use a dyna cap/stem and wand on the vaphit x tip works a treat, I just got the vaphit x kit w/ball stem. It's a beasty stem works great, takes a few hits to get the steel stem hot. Super cool for the 1st hits. I use a ss mesh bowl screen inverted in the tip to make a 1/2 bow,l w/out the extra heat mass of a converter ring.
way impressed by the value of this lil beast
way impressed by the value of this lil beast
SlickHenry
Well-Known Member
Yeah it’s a great performer. Rather than completely filling the metal stem I now only put in 4 or 5 balls plus the star. This really opens up the vape and reduces draw resistance.
i personally never use half bowl settings but just put in less material with the screen set full bowl. Seems to work just as well.
I'm just pushing the original screen past the additional holes in the chamber (have a 8mm "tool" to make it easier). Holds reasonably well.
But could you give me a tip, where to find a converter ring - looking for my convector. Thanks.
im not a robot
Well-Known Member
yes same here, works really nice with small amounts.
out of curiosity, does anyone who owns a tempest or anvil or danivap etc thinks they offer anything substantially different than the vaphit? i am really quite happy with it - just feel like trying sth new i suppose. but i find this really hard to justifie as the vaphit performs so well?
budski
cantre member
Sneaky Pete Half-Bowl Converter™
The Sneaky Pete Half-Bowl Converter is the perfect accessory for any DynaVap owner who wants to improve the efficiency, power, and ease-of-use of their device.
using the halo on the vap x stem this morning, great combo, industrial tool chic, but I probably won't reach for this heavy weight very often.
I'll try it with fewer balls, I'm not a torch guy so i use IH/dynacap
ps like it w/less balls but I'm gonna make an intercooler for it and see how that plays, way easier to clean than the balls.
Last edited: