Discontinued VapeXhale Cloud EVO

subway13029

Well-Known Member
Got my evo from the fed ex woman today..it was a sight..i get it sent to my job(restaraunt...my member name..lol)im standing there and fed ex pulls up and keeps on going and i know its because i just had the suite number so she pulls off and starts driving through the shopping center not knowing what she is looking for just my name and a suite..the usps guy has gotten to know me well..lol..so after about 5 min she stops across the parking lot at academy sports and i thought that if i didnt stop her she was gonna take off and it would be a few more days so i did what anyone would do i asked the guy eating his breakfast to hold the fort down and i went out and ran her down arms flailing around..she saw me from afar and came driving over and confirmed it was me and i explained our suite number and yada yada..but i have the evo!! Ordered friday i believe..got the evolver hydratree and was a lite bummed that my hydrafoot that is supposed to come with this setup wasnt in the package but a quick email and jeff who is awesome and before my evo was shipped hooked me up with extra wristbands for heat assured me that my hydrafoot should have been in packaged and he would have one out to me shortly..so im psyched and will be using me evo in about 2 hours or so as soon as work is over..
 

gaseous_clay

Well-Known Member
Yes indeed!! Still testing in the name of science...any tips or tricks??
Put ground up weed in a bowl. Put water in the glass thing. Put the bowl in the tube when green. Tube on top of that. Inhale through the hole at the top. Enjoy the fuck outta it, baby!

The rest you'll figure out.

Yeah only thing I can't figure out is when I inverted it I lost a whole elb straight into the water!!!riddle me this guys..

@subway13029 (post below this)
1. I hope you were using something other than the HT. They don't invert good.

2. Assuming it was for another water tool, all of my ELB's fit slightly differently. Some are tighter than others. When inverting I try to match up a tighter ELB and cap (the cap coming off doesn't help matters much either.)
 
Last edited:
gaseous_clay,

lapsda00

Well-Known Member
I am crying, why the f*uck was i born in Europe ? European pricing is still the same and i dont see anything changing in the future. It was like a dream when i saw the discounted price - I thought - finally i can afford it ! but then comes the reality -- The EU orders goes trough vapefiend and the price is high as it used to be :rant::cry:
 

Pyr0

Stoned Roses
Yeah I completely agree, it really sucks to see the prices unchanged over here :bang:
I paid the equivalent of $700 for my EVO and HT just 2 weeks ago
I would absolutely love to see discounted accessories and hydratubes for less than £100
 
Last edited:

vjt324

Well-Known Member
Okay so, after the first night/morning w the evo, I can say that this thing is a powerhouse.

Couple questions for the pros...

What are u guys hitting the vxn at, I've been around 2-3 oclock, seems okay, any suggestions?!

How long can I keep this thing on? I mean can I treat this like my enano or should it be like a session unit where it gets turned right off after every use?

And last, the unit started blinking red and green last night, idk what it was but i shut it off immediately and had no issues this morning
 
vjt324,
  • Like
Reactions: BoinG

stickstones

Vapor concierge
blinking was probably the auto shut off that kicks in after one hour.

You can keep it on as long as you like. some users here leave it on constantly with a timer. I turn mine off after use since I won't be using it again for a couple of hours.

You can hit that nail at as low a temp as you want...play with it! But 3 is a good starting spot for high temp dabbing. If you dig the lower temps, you will keep inching it down until you find your zone. I've gone as low as 1 with great results and will have to try lower, now that you've got me thinking about it!
 
blinking was probably the auto shut off that kicks in after one hour.

You can keep it on as long as you like. some users here leave it on constantly with a timer. I turn mine off after use since I won't be using it again for a couple of hours.

You can hit that nail at as low a temp as you want...play with it! But 3 is a good starting spot for high temp dabbing. If you dig the lower temps, you will keep inching it down until you find your zone. I've gone as low as 1 with great results and will have to try lower, now that you've got me thinking about it!
With the latest firmware update I can heatsoak it and dab at 12 for flavorful face punching hits. You have to slow your draw a bit though
 
Cannabis Connoisseur,
  • Like
Reactions: KimDracula

IAmKrazy2

Darth Vapor
Does anyone else have a pair of heat resistant gloves for the VX Nails? I have some grill gloves and they make me feel all spacy while i am using my nails.
 

oldiebutgoodie

Apostle, Church of Vaporization
Even when you get as :myday: as I am, there is always something new to learn. Like . . .

So where I live concentrates have not been available. Till this week. We now have some oil cartridges! I have a couple of VXL nails - the new style (with larger cut-out) and its predecessor - but this will be our maiden voyage. I get how to use the nail with a solid like wax, but don't know about oil. Searching the thread didn't pan out; too many hits. So . . .

Suggestions please on using oil in the nail? TIA! :wave:
 
oldiebutgoodie,

HellsWindStaff

Dharma Initiate
@subway13029 i was gonna ask the same question...lot of my pieces are 18mm female, and I felt like I would end up just kicking the ELB right down the joint lol.

Damn at that shipping service though...I ordered Monday night...expecting it to take all week from CA.....nope, it was attempted today but I'm out of town still. Had to arrange it to be held at local FedEx....now my job can't end quick enough!
 
HellsWindStaff,
  • Like
Reactions: Mangos

BoinG

Well-Known Member
So finally I took a few pic´s of my setup, going to sort some out now. If anyone is willing to upload them, give me a pm to exchange our mail address and I´ll pass the pics then. Cant put them on my regular account since other people have access to it.
 
BoinG,

oldiebutgoodie

Apostle, Church of Vaporization
@oldiebutgoodie
I'd try some tiny spoons. I have one of the skillet tools from VAPEXHALE and use that. Also try a small syringe bro! Maybe a steak knife? Come on Oldie where's that ingenuity!? Get that oil in there bro!

We've figured out how to get at and dispense the oil (a hammer-head syringe).

But how much do you put in the nail? Is oil typically vaped around the same temp as solids? Is the nail cleaned the same way by burning off? Any other factors specific to using oil?

TIA, again.

:myday: :science:
 
oldiebutgoodie,

jimdee

Well-Known Member
...But how much do you put in the nail? Is oil typically vaped around the same temp as solids? Is the nail cleaned the same way by burning off? Any other factors specific to using oil?...

A small amount should do ya. 1-2 on the dial is pretty common for oil. Lowering temps can be very tasty. Clean by burning off, check. The vxl tutorial on nail use is pretty good:


Enjoy!
jd
 

oldiebutgoodie

Apostle, Church of Vaporization
A small amount should do ya. 1-2 on the dial is pretty common for oil. Lowering temps can be very tasty. Clean by burning off, check. The vxl tutorial on nail use is pretty good:


Enjoy!
jd

Thanks a lot! I saw (but in all honesty, had forgotten) that video, but what threw me was that the "essential oil" shown is actually a solid (isn't it?). So is it just a matter of using an equivalent amount of oil, except that it's a liquid instead?


:myday: :mental:
 
oldiebutgoodie,
  • Like
Reactions: jimdee
Top Bottom