TinyMight Vaporizer

dzoinp

TiStems by measure
Accessory Maker
hi dzoinp, do you load the balls directly to your titanium stem or you load them on the cooling unit first and then just insert the CU to the titanium stem?
I use the 6 SSballs (5mm)inside the 1/2 CU
 
dzoinp,

m0sh

Singer Song Writer Stoner
5SjksM0.jpeg


I got to hand it to Patagonia or better yet, my sister for providing me with this simple life-changing pouch.

I always had issues with portable vapes in the public. I don't like the "closed" chamber design vaporizers like PAX and so on.
I was always a fan of the solo form factor because it was pretty much maintenance-free, but it was never really portable nor easy to reload.\
So I always opted to go out without any device. That is until it became legal for me and I said *uck it.

I have been using TinyMight for more than a year now and it is my most important vaporizer, the one I would choose to take to an island
But using it outdoors was still not perfect unless I went to a place where we could sit down...

Now, with such a simple pouch, I can take some grounded herbs in a small sealed box, 2 extra batteries, a stir tool, and my XL stem.
And I use it while standing and using one hand only. I'm not sure why not company provide this option as a carry bag, because even on the dance floor, I can open my pouch and fill my stem so easily, that it makes no sense to carry it otherwise.

This makes my experience as practical and maintenance-free as possible.

6Gcbg9e.jpeg


I take my pouch to work every day. I love it!.
Get yourself a pouch!

P.S : Bonus picture - the best place to use the TinyMight is in nature :)

Y53RIop.jpg


Peace and love.
 

Vaporific

All who wander are not lost...
I use 1/8 in (3.1 mm) SS balls which I put in both parts of the CU and place in the 60 mm glass stem. I ordered the longer stem to see if it would be a bit cooler because the glass does get hot.

I wonder what 2 (4 piece) CU would do?
Twice as cool? There’s only one way to find out… I’m fairly certain someone on here has tried it and posted pics of a dual CU. I only use one at time; I dispensed with the nuts & washers in both of mine (one is a spare/backup).

My TM is completely cleaned, stems and CUs too all ready for my vacation later this week. And some new Molicel P26 batts arrived today too from 18650batterystore and will charge them up (and label them) tonight. 🏝😊:peace:
 

Adobewan

Well-Known Member
Twice as cool? There’s only one way to find out… I’m fairly certain someone on here has tried it and posted pics of a dual CU. I only use one at time; I dispensed with the nuts & washers in both of mine (one is a spare/backup).

My TM is completely cleaned, stems and CUs too all ready for my vacation later this week. And some new Molicel P26 batts arrived today too from 18650batterystore and will charge them up (and label them) tonight. 🏝😊:peace:
“Mmmmmmm, new batteries!”, thinks your Tinymight as it licks its chops.
 

andrew`124c41+

Well-Known Member
Twice as cool? There’s only one way to find out… I’m fairly certain someone on here has tried it and posted pics of a dual CU. I only use one at time; I dispensed with the nuts & washers in both of mine (one is a spare/backup).

My TM is completely cleaned, stems and CUs too all ready for my vacation later this week. And some new Molicel P26 batts arrived today too from 18650batterystore and will charge them up (and label them) tonight. 🏝😊:peace:
Have vape....will travel. Sounds like you are all set. Don't know where you are going, but I just hope it is not TX. There is one particular road that people take from either CA or CO, especially the latter and there was a Trooper who stopped drivers for either petty stuff or absolutely nothing....then he would either find something or plant it. He was finally caught but all he got was probation. I have no doubt there are others who think they are saving the world by doing this!
 
andrew`124c41+,

Carrera3.0

Active Member
Have vape....will travel. Sounds like you are all set. Don't know where you are going, but I just hope it is not TX. There is one particular road that people take from either CA or CO, especially the latter and there was a Trooper who stopped drivers for either petty stuff or absolutely nothing....then he would either find something or plant it. He was finally caught but all he got was probation. I have no doubt there are others who think they are saving the world by doing this!

doesn't matter where, traffic cops everywhere are always hoping you'll allow them to have a look. "mind if I search your vehicle" "if you don't have anything to hide just pop the trunk" to which I always replied, "may I see the search warrant" "I'd like to speak with the officer in charge" "let me just call my attorney" "he'd like to speak with your commanding officer"
 

Vaporific

All who wander are not lost...
Don't know where you are going, but I just hope it is not TX.
Key West (first with friends) then south Florida visiting family. Just rediscovered online the lone dispensary there that does not require a medical card (stopped in last time where a friend bought some edibles, I didn’t need to buy anything then). It’s still there as I just checked. I am set and stopping on the way to my hotel :).

New CU orings on my cleaned stock short stems, new batts now charging and I should be all set for my TM’s travels. Can’t wait! :) :peace:
 

florduh

Well-Known Member
Key West (first with friends) then south Florida visiting family. Just rediscovered online the lone dispensary there that does not require a medical card (stopped in last time where a friend bought some edibles, I didn’t need to buy anything then). It’s still there as I just checked. I am set and stopping on the way to my hotel :).

I think this is very cool and I support it. But that sounds like it's illegal here in Floriduh. Maybe Key West is so far from the mainland it's like a frontier outpost the Law can't touch.
 

Vaporific

All who wander are not lost...
I think this is very cool and I support it. But that sounds like it's illegal here in Floriduh. Maybe Key West is so far from the mainland it's like a frontier outpost the Law can't touch.
I don’t get it either but they don’t require a med card (it even says it on their online site). I’m not a med user and long time rec user so it’s fine with me. I have a homemade case utilizing a hard shell eye glass case with foam rubber pieces I cut and glued in. I can fit my TM with a short stem inserted and there’s also a slot for an extra stem. A rubber band keeps it closed in case if accidental openings. That’s just for transporting it. I can walk around with my TM in a pocket as I use rubber caps to cover the top of the stem so the stem is mostly protected. I’m not running around or doing anything strenuous when it’s in a pants/shorts pocket. Easy, and I’m good - more than good with such an amazing vape. :peace:
 

zatonic

Well-Known Member
Floridian here. The only time I see "no med card needed" is usually delta 8 gummies / carts. But there could be that one rebel out there as we are still a med only state.
 

Vaporific

All who wander are not lost...
Floridian here. The only time I see "no med card needed" is usually delta 8 gummies / carts. But there could be that one rebel out there as we are still a med only state.
Yeah, a buddy privately mentioned a D8 vs. D9 thing which I think is what you’re referring to. I don’t recall what if any explanation was given when I was there last time (mostly due to a bad hangover, lol, and the fact we stumbled onto and into the store; my friend bought some edibles and I just browsed). At least it’s something and something to look forward too when I get there (on the way to the hotel of course).

New Molicels took a long time to charge. I thought they came charged 60% but not according to my external Nitecore charger. Paranoia got the best of me and I’m bring some extra orings and screen for my TM, and a couple of tweezers just in case the heater screen gets pressed in which happens once in a blue moon. Cheers. :peace:
 

ploooopp

New Member
Heyo so what do people think about putting the whole stem with the CU into a pot of milk and simmering it for a bit? as a way to clean it (will do warm water and salt rinse afterwards) and get some reclaim
 

florduh

Well-Known Member
I have seen stores with "Cannabis" in the name that sell "weed" around The Free State. And by weed they mean hemp flower sprayed with Delta 8 distillate. I've sort of tried this by vaping a bowl of hemp flower, then dabbing a little Delta 8. To lower tolerance newbies, I bet it would sort of feel like a traditional cannabis high. I don't think it would fool many regular consumers though.

If you're smart, Floriduh shouldn't be a problem. But keep in mind the cops here are psychos. Though I bet they're a bit chiller in Key West.

Heyo so what do people think about putting the whole stem with the CU into a pot of milk and simmering it for a bit? as a way to clean it (will do warm water and salt rinse afterwards) and get some reclaim

@ploooopp I don't see why that wouldn't work. If the CU is full of scooby snacks though, you may need to strain it a bit. Give it a whirl and let us know!
 

Adobewan

Well-Known Member
Heyo so what do people think about putting the whole stem with the CU into a pot of milk and simmering it for a bit? as a way to clean it (will do warm water and salt rinse afterwards) and get some reclaim
I might consider iso cleaning the cooling unit at least once to be sure any machine oils have been removed from the nuts and bolts but it seems worth trying.
Good luck, looking forward to your results.
 
Adobewan,
  • Like
Reactions: florduh

traf67

New Member
Hello everyone,
I am new on this forum that I knew thanks to Ebay and Dzoimp.
I researched vaporizers extensively. I will be 30 this year and quitting smoking is important with the associated risks.

This vaporizer is exceptional, I am very satisfied with it.
the amount of smoke and the flavors are awesome.
I am a clumsy person, I have already broken two tubes and the interior protective glass.

Now I have ordered some spare parts which seem necessary to me.
in terms of use, the battery drains rather quickly.
I successfully tried using a Bang with the tinymight. The result is surprising and very appreciable.
I don't know if my comment is relevant. On the other hand, I recommend this vaporizer to everyone.
See you soon, and fuck combustion :)
 

Vaporific

All who wander are not lost...
Just do yourself a favor and avoid being part of an article that begins... "Today, a Florida man..."
Technically I’m not from FL. But thank you. I am not driving anywhere in Key West and in fact dumping the rental car before hitting the main part of town. I however will be driving out of Key West. I’ll be careful.

If you're smart, Floriduh shouldn't be a problem. But keep in mind the cops here are psychos. Though I bet they're a bit chiller in Key West.
See above - I’ll be careful. Though not originally from FL I’ve been there many times and most parts of the state too at this point. I did call them as their online site for ordering is offline. They sell flower 3 times more potent than the med strains they sell. I didn’t get into the whole makeup and categories (THCA, etc.). They have plenty on hand and no need to order in advance they said.

I’ve already packed my TM and will post a pic of my homemade case when I get there. Cheers! :peace:
 

WisePenny

Well-Known Member
Heyo so what do people think about putting the whole stem with the CU into a pot of milk and simmering it for a bit? as a way to clean it (will do warm water and salt rinse afterwards) and get some reclaim
I've done this, although I've used 10% cream (from what I've read, the higher fat content is better because that is what it binds to, idk).
It works okay that way, but you'll have better luck if you take the cu out of the stem, and at least loosen it up - the nuts and bolts get pretty gummy and stuck together. Stir it around to agitate too.
 
First time posting after a long time of lurking. What a wealth of knowledge this community offers. Thanks so much!

I received my second TM. What an great experience coming from the 1st gen. I the fit and finish is much improved. The aluminum looks brushed, the wood appears sanded and polished/stained, the light leak is gone and most importantly there is no sea hag smell! Also it took 5 days to get to my door after ordering rather than 6 weeks. After 24 hours of owning it I left it on the window sill to cool down and air out and the wind blew it off. After a quick inspection and a shake test, no rattling other than the button which was there from day one. It survived a 4 foot fall onto a hard floor. Thank goodness it still operates like new.
So I have a couple questions.
Should I do any other inspections/tests to see if there is any damage? I've always felt like the TM is fragile but it seems to be working great still.
Also the battery door seems to not tighten all the way flush. I'm hesitant to force it all the way down as it was upon arrival. I found if it's not tight it operates with less power, so how tight should I screw it? Sorry if this has been asked before.

Thanks.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAAA! (TM/FW7/OAB/CC-H&A)
Welcome @traf67 great contribution! You may also be interested in those titanium stems it sounds like...

And welcome @Cacahuates (and the other newbies!) Great to hear from another old owner turned second TM acquirer, excited to hear about the lack of light leaking in particular...

Anyway I had once dropped my TM from the couch on to hardwood floor, at an angle, probably less than a foot, but since there was a battery installed it caused the connection to compress a bit, so now in that original TM I have to screw the battery lid all the way down flush to make the connection... For that I wouldn't screw it down very far, and I don't screw my second TM battery lid down so far, though I do screw it in fully, it just doesn't go down as far... So yeah I think you are fine there? Other than that it has been working fine, nothing broken, so you probably know what to look for and inspect?? Hopefully all good!
 

Djsleepy

Well-Known Member
First time posting after a long time of lurking. What a wealth of knowledge this community offers. Thanks so much!

I received my second TM. What an great experience coming from the 1st gen. I the fit and finish is much improved. The aluminum looks brushed, the wood appears sanded and polished/stained, the light leak is gone and most importantly there is no sea hag smell! Also it took 5 days to get to my door after ordering rather than 6 weeks. After 24 hours of owning it I left it on the window sill to cool down and air out and the wind blew it off. After a quick inspection and a shake test, no rattling other than the button which was there from day one. It survived a 4 foot fall onto a hard floor. Thank goodness it still operates like new.
So I have a couple questions.
Should I do any other inspections/tests to see if there is any damage? I've always felt like the TM is fragile but it seems to be working great still.
Also the battery door seems to not tighten all the way flush. I'm hesitant to force it all the way down as it was upon arrival. I found if it's not tight it operates with less power, so how tight should I screw it? Sorry if this has been asked before.

Thanks.
No just tighten as far as you can without forcing, just make sure you hear and feel the vibration letting you know battery is powered.
 
Top Bottom