There are known counterfeits on that and other sites. If you search this thread you will find more information.
They seem to not only suck but are actively dangerous.
TinyMight / TM 2
- Thread starter kuzko
- Start date
They seem to not only suck but are actively dangerous.
Dr. G
***Old Resident*** Vapman Collector
I only buy the Tinymight from Tinymight. If there are other places that are legit I am unaware of them...that seems to be something I would never buy...but, the stems are exactly like the originals...oh well.
I reload three times. Never a problem. My Tinymight is the least problematic of all my vapes. Actually, NO problems. Just wait a few seconds inbetween. Or have another tube ready. That is what I do as well...
Vaporific
All who wander are not lost...
It depends on what temp(s) you use. I never have a problem and I start at 4 and finish 5-6, natively too. If you hold it by the mouth end it’s never hot for me. Middle of the stem gets very warm but manageable. Again I’m not a high temp user unless I go through water or filtration which is on a rare occasion.
onesixty2
Well-Known Member
It wouldn't surprise me if that glass is roughly the same specs as the official TM stuff. Alliexpress & DHGate have tons of glass shops that sell identical glass products that you can find on U.S / EU official retailer sites. IMHO that's the only safe buy from those kind of wholesale shops.
badbee
Well-Known Member
If the stem is too hot I blow on it for 20 seconds and then proceed, no big deal. The body never gets too hot.
His stems don't have the thickness of German Schott or Duran glass which means they almost certainly came from China. Nobody makes stuff like this from solid glass rod, too time consuming and difficult, stems are always made from factory premade blank tubes and then modified.
SolidAirrr
Well-Known Member
New here and to this amazing TM, which I just got after reading all the good things here and loving the design and general craftmanship.
Only thing I was really surprised about from first touch was the rattling button and the LED shining all the way through the top holes and the stem.
Guess the latter is normal but with such a well made device this lose button doesn't really fit. Months back in the thread I read the button was much improved ("tighter") so I wonder whether I cought a weird unit.
Looking down the battery intake one can look down on the button and the free space behind and that it'd seem kinda easy to improve the lose and rattly feel. Wondered whether anyone (with a more recent unit) could comment on that?
Other than that have a great weekend and enjoy your TMs
Only thing I was really surprised about from first touch was the rattling button and the LED shining all the way through the top holes and the stem.
Guess the latter is normal but with such a well made device this lose button doesn't really fit. Months back in the thread I read the button was much improved ("tighter") so I wonder whether I cought a weird unit.
Looking down the battery intake one can look down on the button and the free space behind and that it'd seem kinda easy to improve the lose and rattly feel. Wondered whether anyone (with a more recent unit) could comment on that?
Other than that have a great weekend and enjoy your TMs
Last edited:
tokenknifeguy
Well-Known Member
Anyone got them capsules and have any luck with them? I just got my order of 4 in, and they don't even fit in the glass tube. I ordered the long tube originally, and then just got the extra long spiked tube and none of them fit in there. I guess it is just supposed to sit in there with some sticking out of the glass tube (the cap)?
SolidAirrr........I too was worried about the loose button when I first got my TM, but after taking it apart and all, I have no worries. The button is a solid piece of aluminum (unless they changed it up on the newer devices, as mine was close to when it came out) and very robust. I have no worries about the button, but it does rattle. Also there is a way to cut off the light from showing, but I actually like it so I know it is on. Though at night, it can be a problem as it is very easy to see from other people.
The device can get hot when going back to back. Mouthpiece can get hot too.
SolidAirrr........I too was worried about the loose button when I first got my TM, but after taking it apart and all, I have no worries. The button is a solid piece of aluminum (unless they changed it up on the newer devices, as mine was close to when it came out) and very robust. I have no worries about the button, but it does rattle. Also there is a way to cut off the light from showing, but I actually like it so I know it is on. Though at night, it can be a problem as it is very easy to see from other people.
Last edited:
WisePenny
unknown. unmember.
To bring this saga to it's dramatic close - shortly after this, I tried again on instagram, got a message and apology for the delayed response. . . shipping label that day. Round trip for repair - 9 DAYS - Canada to Finland and back again in 9-frickin-days.
The unit I received has very solid buttons. Not rattling like people used to say.New here and to this amazing TM, which I just got after reading all the good things here and loving the design and general craftmanship.
Only thing I was really surprised about from first touch was the rattling button and the LED shining all the way through the top holes and the stem.
Guess the latter is normal but with such a well made device this lose button doesn't really fit. Months back in the thread I read the button was much improved ("tighter") so I wonder whether I cought a weird unit.
Looking down the battery intake one can look down on the button and the free space behind and that it'd seem kinda easy to improve the lose and rattly feel. Wondered whether anyone (with a more recent unit) could comment on that?
Other than that have a great weekend and enjoy your TMs
Djsleepy
Well-Known Member
With the ability of the TM2 to extract fully all the terpenes and cannabinoids available I wanted to drop this for anyone new to vaping or if interested in what temps deliver what effects. Being a medical user this information is priceless.
honestmarijuana.com
Vaping Temperature Chart: The Complete Guide - Honest Marijuana
Want to get the most out of your pot plant? Use our vaping temperature chart to maximize the cannabinoids and terpenes you consume from your cannabis.
honestmarijuana.com
Seantagon
Well-Known Member
Just saw this post somewhere else on the forum, it’s a good read. Now that we have the temps dialed in for each # we can play along.With the ability of the TM2 to extract fully all the terpenes and cannabinoids available I wanted to drop this for anyone new to vaping or if interested in what temps deliver what effects. Being a medical user this information is priceless.
Vaping Temperature Chart: The Complete Guide - Honest Marijuana
Want to get the most out of your pot plant? Use our vaping temperature chart to maximize the cannabinoids and terpenes you consume from your cannabis.
Best not to use the capsules in the 3d stem. If you do manage to get it in there, you'll have a hard time taking it out (since you can't just push it out from the other end).
Do not do this. A cap sticking out of the stem can push the heater screen into the heater coil. Your TM will be Finland bound when that happens.
tokenknifeguy
Well-Known Member
So how are these capsules supposed to work? They go actually inside the stem? I have the regular long stem and it doesn't fit either. Don't worry about me pushing in the heater screen, as I've already done it with just the regular stem. I'm very careful now and stop pushing at the slightest resistance. But pushing in the metal screen is definitely a potential problem.
sickmanfraud
Well-Known Member
I just grabbed all of my stems and checked. All of my dosing capsules fit all my stems that don't have a glass screen.
that means stock 55mm
stock 80 mm
3D stem
Eds tnt stem and
High artisan stem
The only stem that has glass too thick to fit the dosing cap top is from @RogueGuy at Theroguewaxworks.com.
that means stock 55mm
stock 80 mm
3D stem
Eds tnt stem and
High artisan stem
The only stem that has glass too thick to fit the dosing cap top is from @RogueGuy at Theroguewaxworks.com.
Momor
Well-Known Member
FWIW i did push my screen onto the heater a few times (at least 3), using S&B capsules and not being careful enough, and the only damage caused was a burnt hole in the heater screen otherwise the unit still worked perfectly (once the screen out of the heater obviously, héhé)
Djsleepy
Well-Known Member
Not possible new heater screen protection
tokenknifeguy
Well-Known Member
I got the old stems that came with my unit about 1+ year ago and they didn't fit. I just ordered the long spiked stem and it didn't fit. On the cap, you can feel a 'lip' from where it was cut. I ended up having to file down all 4 of my caps to get them to finally fit in the glass stems I have, which are all from TM's website. Kinda sucks to have to do that and it was a PITA with them being so small.
scooterboy
Muppet, not moped.
Are we sure that the TM2 will be consistent regarding which number on the dial corresponds to which temperature? This was definitely not so with the original TM. I'd personally be surprised if the TM2's dial was that consistent and calibrated that precisely.
SolidAirrr
Well-Known Member
oh, surprised to read this. when did you get yours? mine is supposed to be a rather recent one.
would you mind having a look in the battery compartment whether there's something between the button and the board? all the way 'slit' out i can see a tiny gap between the button and the board.
Dr. G
***Old Resident*** Vapman Collector
I have a version 1.5 and it does not rattle or is it loose. Solid as hell. Best vape ever.
I received it 2 weeks ago. As people often say that this is Tinymight v1.5 and it has fixed the problem of clicking buttons. I order directly from Tinymight's homepage
Watch Tinymight 2 with Triple Horn Inline | Streamable
Watch "Tinymight 2 with Triple Horn Inline " on Streamable.
streamable.com
So it looks like it works just as good as TM1Watch Tinymight 2 with Triple Horn Inline | Streamable
Watch "Tinymight 2 with Triple Horn Inline " on Streamable.streamable.com
