Thank you for talking me off the ledge. Honestly, I get stupid crazy about it. In all truthfullness, I'm sure I see way more people char a little at high temp full extraction than not, but I tend to stare at that one perfect load more often than not.
TinyMight / TM 2
- Thread starter kuzko
- Start date
Thank you for talking me off the ledge. Honestly, I get stupid crazy about it. In all truthfullness, I'm sure I see way more people char a little at high temp full extraction than not, but I tend to stare at that one perfect load more often than not.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Don't get me wrong it is thrilling to get that perfect even extraction when it happens on occasion, but yeah much more thrilling to just enjoy the experience and the results regardless, just the consistent effectiveness and convenient versatility of this vape... Especially when something is new though, it can be quite difficult not to overthink everything about it as you enjoy it, I know!
They look pretty good at a reasonable price. I don't know the diameter tbh. Got my tinymight a week ago. Do the screens fit well?
SquirrelMaster
Well-Known Member
The way your reply was worded I thought that you thought there was a physical temp sensor probe. Either method works, but I think I prefer temperature control when measured through the resistance of the coil so there isn't another item in the vapor path.
beluga808
Well-Known Member
I have them placed below the CU or glass screen (depending on what stem I use). I personally think they fit as good as the original ones.
Lazytechnician
Well-Known Member
Hey!
You can order them from the French site!
Aérotube Tinymight - Extra long 3D cooling stem
Grand embout en verre avec picots 3D pour refroidir grandement la vapeur de votre vaporisateur Tinymight
I've ordered a couple of times from there - always arrived in less than a week
Vaporific
All who wander are not lost...
SO, I brought my Tinymight on its first airplane and vacation and it performed admirably. I do think the high humidity in FL (when is it not humid there?) played a part in reduction of vapor as time went on. I did bring an extra clean short stem and CU but didn’t get a chance to change them when I wanted to (always on the go). It probably needed a change or cleaning but I didn’t get the chance. A buddy whom I shared it with was very impressed but not a regular vaper. It was great though to share it with someone (Covid vaxxed of course as I am). I actually used the spare clean pair last night back home and all is well again in my TM universe.
Also, I placed a TM accessories order including spare heater screens (and the oring pack and… water adapter taking the CU!
). The spare screen from my new P80 is just a tiny bit too small and tends to fall out, and I don’t want another combustion incident with the screen on the heater coils again like my very first (of two) combustion incidents. I’ve got to say that after almost 19 months that I simply LOVE ( 
) my TM - every single time!! 
Also, I placed a TM accessories order including spare heater screens (and the oring pack and… water adapter taking the CU!
). The spare screen from my new P80 is just a tiny bit too small and tends to fall out, and I don’t want another combustion incident with the screen on the heater coils again like my very first (of two) combustion incidents. I’ve got to say that after almost 19 months that I simply LOVE ( ) my TM - every single time!! 
TommyDee
Vaporitor
A propane torch will soften the frosted glass.
Seantagon
Well-Known Member
Are you referring to the mod above with 1/2 CU and 4mm bearings? (looks great btw!) shaking doesn’t do much for me with other vapes as my material is stuck together by that point.
beluga808
Well-Known Member
Just for the record, as I can't edit the post anymore: the screen fits, because the inner diameter of the glass stem is 12mm NOT 14mm.
Well I definitely don't have one of those. Is it frosted the whole way through? I only have two frosted glass adapters, and up until just now I had never put my lips on my Tetra one.............was waaaaaaay better than my other one. Was barely frosted and didn't feel all that horrible. Still not crazy about it, but if they're not frosted the whole way through I may be able to sand it down some. So I guess my next question would be, do you have the TM one by chance?
I
Djsleepy
Well-Known Member
The heavy user strikes again!!!!!! Well this was done within 2 mos. And a week, I was using as normal this morning........ I got a huge combustion biggest yet and I pulled the stem and looked in and coil was red hot yet I wasn't firing.it nor was it in session as I'm looking in hole my hand gets so hot I had to throw unit on my lap!!!! Button was clicking but not responding had to.unscrew.battery to get it to stop. Contacted TM got labels sending in. Wish me luck! Now pull out TM backup!
Djsleepy
Well-Known Member
That's a good bet!And THAT is why we have backups...
In truth your heavy use for 2 months is likely similar to my use over a year or more.
Kaptan
Well-Known Member
So I’ve been reading in the Mighty / Mighty barely + thread recently that many have switched to loading the oven full nug, no grinding method with good results. Maybe others have posted earlier in this thread about it , but I’ve been loading my TM the same with very good results using my RBT stem as WPA. At setting 6, I’m getting many flavorful clouds, then when the vape becomes wispy, break it up on a porcelain dish, reload, and still more dense flavorful tasty clouds. IME, I feel like I’m getting more medicated using less and not having to grind is a +.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
The multi WPA from TM is perfect for whole nug or chunky vaping with its glass honeycomb screen, I think I posted a whole detailed description of how I do that, or at least I took pictures and intended to lol
Seantagon
Well-Known Member
I’ll have to try this, very interesting. I saw that in their thread as well, but figured it was working good for them since the Mighty is both convection and conduction heating.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I actually find whole nug vaping to work much better with pure conviction on demand than any session hybrid or conduction style personally, those type of vapes really need a more consistent grind in my experience...
Bad Dog
Yeah I pissed on the rug...... so what
little ruby and water cooled tinymight action.
not to be off topic but I tried the whole nug in my crafty and it worked perfectly, and was brown all the way through if you use one that's not to dense
not to be off topic but I tried the whole nug in my crafty and it worked perfectly, and was brown all the way through if you use one that's not to dense
WisePenny
unknown. unmember.
You need to vape with conviction boys! Let those whole nugs know you really mean business
Dont worry you're not alone
