TinyMight / TM 2
- Thread starter kuzko
- Start date
You really should read the warranty terms and conditions.
warrantyconditions
tinymightvape.com
"
This warranty is valid only if the customer registers the product within one year of the delivery at tinymightvape.com or tinymightvape.eu OR by registering it by 31th December 2023.
Warranty will be voided if the product has not been registered within this period. The product can be registered only once.
The product can be registered only by the original owner of the device and warranty is not transferable in case of re-sale."
Its pretty standard that you have to register for a warranty within 1 year of purchase
El Duderino
The Dude abides.
This doesn't really add anything to the thread, but I just have to reiterate it: The Tinymigh.t_bowl really hammers.
So far I've only used the half bowl setting, which in my case is a little more than 0.1g. The first few times I set the TM2 directly to 7 and had correspondingly cloudy results.
However, I've just realized that it's even more fun to start at 5 and then work your way up. In total, I was able to take 3 really dense and 1 weaker puff - from a little more than 0.1g!
I’m really just new to all this vaping stuff - but I think this Tinymigh.t_bowl is awesome and highly recommended.
So far I've only used the half bowl setting, which in my case is a little more than 0.1g. The first few times I set the TM2 directly to 7 and had correspondingly cloudy results.
However, I've just realized that it's even more fun to start at 5 and then work your way up. In total, I was able to take 3 really dense and 1 weaker puff - from a little more than 0.1g!
I’m really just new to all this vaping stuff - but I think this Tinymigh.t_bowl is awesome and highly recommended.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
You really should read the warranty terms and conditions.
warrantyconditions
"
This warranty is valid only if the customer registers the product within one year of the delivery at tinymightvape.com or tinymightvape.eu OR by registering it by 31th December 2023.
Warranty will be voided if the product has not been registered within this period. The product can be registered only once.
The product can be registered only by the original owner of the device and warranty is not transferable in case of re-sale."
Its pretty standard that you have to register for a warranty within 1 year of purchase
Welp hopefully if I ever have an issue they won't screw me over, I kind of trust them not to, but didn't really realize this was a thing as most others companies don't seem to care...
Maybe its just a European thing. I'm in the UK its pretty normal here that you have to register.
BTW a warranty is always offered in addition to your statutory rights.
In the UK you have the sale of goods act which means if something fails within 6 years you are entitled to 1/6 of the cost back per year remaining of those 6 years .. so if it fails on year 3 you get half back and if it fails on year 6 you get 1/6 back BUT that is levied against the retailer and not the manufacturer! So if your retailer goes bust the manufacturer dosent owe you anything. UK retailers hate this!!
The whole 10 year vs 3 year thing really dosent matter anyway.
A warranty dosent guarantee your device for that length of time, it just says you have x amount of time in which they will repair "manufacturing defects"
If something fails in 5 years time, which is it more likely to be, a manufacturing defect or wear and tear? A warranty dosent cover wear and tear.
The problem with a 10 year warranty is that it will most likely break within 10 years, but it will break from wear and tear rather than a manufacturing defect and so not be covered. You try explaining that to a customer without them getting upset! So its not a good idea to have crazy long warranties because customers dont always understand what a warranty means and so you can kind of set yourself up for a fail because in the customer's eyes you have ripped them off and in a legal sense you have complied to the letter of the law.
I think they are a pretty decent company so I doubt they would screw you over.
Last edited:
RustyOldNail
SEARCH for the treasure...
Be interesting to see how many are still using a TM in 10 years?
Still laugh when I see “LIFETIME WARRANTY”, (see Grasshopper thread)!
Still laugh when I see “LIFETIME WARRANTY”, (see Grasshopper thread)!
Xenkishøtz
𝓣Ø𝓜𝓑𝓗Ø𝓤𝓢𝓔 𝓣𝓥
Well, perhaps I'm fucked then. You reckon the guys at Tinymight will be alright with it if I send them an email? I had some shit going on in life that's kept me distracted.You really should read the warranty terms and conditions.
warrantyconditions
"
This warranty is valid only if the customer registers the product within one year of the delivery at tinymightvape.com or tinymightvape.eu OR by registering it by 31th December 2023.
Warranty will be voided if the product has not been registered within this period. The product can be registered only once.
The product can be registered only by the original owner of the device and warranty is not transferable in case of re-sale."
Its pretty standard that you have to register for a warranty within 1 year of purchase
Give it a go. Whats the worst that can happen?
Xenkishøtz
𝓣Ø𝓜𝓑𝓗Ø𝓤𝓢𝓔 𝓣𝓥
I'm currently trying to register it on the website as I believe it's still within one year! Where can I find the order number? I have my pdf invoice but nothing that says order number on it.
Xenkishøtz
𝓣Ø𝓜𝓑𝓗Ø𝓤𝓢𝓔 𝓣𝓥
Would any of these be it?
Id say the invoice # at the top
Xenkishøtz
𝓣Ø𝓜𝓑𝓗Ø𝓤𝓢𝓔 𝓣𝓥
Ty, I'll give it a try. Love this community, always quick and helpful. Much love to you all.
Pablo13
Well-Known Member
Be interesting to see how many are still using a TM in 10 years?
Still laugh when I see “LIFETIME WARRANTY”, (see Grasshopper thread)!
The Crafty in the picture I posted a few pages back is from December 2015, so not far off 10 years now. Never opened, original battery, still going strong and never been warrantied......think it came with a 2 year one for whatever that mattered
RustyOldNail
SEARCH for the treasure...
As the TM site is now selling a replacement “stainless steel” tube to replace the glass sleeve in the TOP of the TM2, I’m wondering if the TM2 still has the GLASS SLEEVE in the LOWER section?
I took apart my friends OG TM, as it came with the bottom glass broken, the heater ribbon blew up, so it was returned for a new replacement. So while an un breakable top SS sleeve is attractive, I’m wondering if my TM2 still has a glass sleeve in the bottom section, after my first screwup, I’m not opening mine up to find out.
I figure the TM manufacturer is tired of fixing broken tube glass sleeves, but if the bottom section is still glass, then?
Most of use prefer glass for flavor, etc., so using a SS glass tube insert might not be a popular “upgrade”, with the trade off of potential breakage.
I took apart my friends OG TM, as it came with the bottom glass broken, the heater ribbon blew up, so it was returned for a new replacement. So while an un breakable top SS sleeve is attractive, I’m wondering if my TM2 still has a glass sleeve in the bottom section, after my first screwup, I’m not opening mine up to find out.
I figure the TM manufacturer is tired of fixing broken tube glass sleeves, but if the bottom section is still glass, then?
Most of use prefer glass for flavor, etc., so using a SS glass tube insert might not be a popular “upgrade”, with the trade off of potential breakage.
Xenkishøtz
𝓣Ø𝓜𝓑𝓗Ø𝓤𝓢𝓔 𝓣𝓥
I second this. I would happily buy and even send my device in to be fitted with all steel parts to maximise durability, which imo is the TM2's only con or drawback.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah I have no problem with the durability and I like the glass, the heat properties are different too, but it is a smart upgrade, just curious if it still has the glass regardless like Rusty said since there are two glass pieces
RustyOldNail
SEARCH for the treasure...
Let me try asking the QUESTION again, in simpler language:
Wondering if the TM2 still has the GLASS SLEEVE in the LOWER section?
Anyone know….
Jess
Well-Known Member
Yes my TM2 has glass sleeve on both top and bottom. I just got mine back from VGoodies as they performed the work. My button was loose and the top glass broke. I ordered the parts from TM and replaced the top glass tube. I accidentally moved the bottom glass a little and the heating element started to unravel. I managed to get it back on but unfortunately my button came completely unsoldered, rendering it unusable. Sent it in, paid for it to get fixed (I was fine with this as it could have been my fault). Now it’s back and I have an extra upper glass before the new steel tubes came out. I ordered extra parts also just in case.
RustyOldNail
SEARCH for the treasure...
EXCELLENT, so at least now we KNOW, that even with replacing the TOP “glass” tube/sleeve, the TM2 could still BREAK the bottom “glass tube/sleeve!
I can understand the electrical/electronics explanation.
But obviously this means buying and replacing the TOP glass tube, only potentially decreases a breakage as there is just LESS GLASS…. and potentially sacrificing flavor for that gain.
Thanks, easy decision for me.
BabyFacedFinster
Anything worth doing, is worth overdoing.
So does that mean if you break this hidden section of glass in the lower area, you could be breathing in particles of glass?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I actually don't really see how it would affect flavor much at all? The airflow only passes a little fresh air over that part before it goes into the heater, right? I don't think cold stainless steel in that small area really affects the flavor, when you are still using a glass stem that the vapor is flowing through from the heater hot air... Might be a little more robust and durable, the glass around the lower heater might be safer with the layout there? Since I think potential breakage could happen other ways for the top glass perhaps
I'm not sure exactly how you would be breathing in particles of glass, if you think it fully shatters into dust and then that remains in the heater and is then heated, and then you inhale that through all the screens? Then up through your stem and into your lungs?? Doesn't sound like a realistic situation to me
Likun
Well-Known Member
These are good, also good with V2 TM caps.
Aérotube Tinymight - Extra long 3D cooling stem
Grand embout en verre avec picots 3D pour refroidir grandement la vapeur de votre vaporisateur Tinymightlacentralevapeur.com
Best price in Eu
Dosing capsules for Tinymight 2 🍃 vaporizer 4 pcs. made of steel
Dried capsules for the Tinymight 2 vaporizer ✔ made of stainless steel ✔ easy dosing of the drought ✔ help to keep it clean. Vaporshop.pl check it out!vaporshop.pl
Thank you so much for the recommendations! I've been going through your suggestions and found some interesting stems.
This one looks like a solid budget option, although the rattling balls might be annyoing https://lacentralevapeur.com/access...ht-1-2.html?search_query=tinymight&results=38
I went for this one, even though it was more expensive than I had planned... But it looks gorgeous!
Spiked & Pilled Cooling Stem for Tinymight by Glass Charlie
Spiked & Pilled cooling stem for the Tinymight by UK glass artist, Glass Charlie.These stems are made to be used with the Tinymight, providing flavourful hits that have been cooled by the internal spikes and 1x cooling pill set inside. The mouthpiece is rolled glass with a smaller diameter...