Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Don’t tell @Shit Snacks ……..
Well those ones are at least closer to accurate at least, I know what they were talking about lol even if it's not a mouthpiece opening that is how it looks
TinyMight / TM 2
- Thread starter kuzko
- Start date
Well those ones are at least closer to accurate at least, I know what they were talking about lol even if it's not a mouthpiece opening that is how it looks
gangababa
Well-Known Member
The idea first came to my attention in a post from @SquirrelMaster in this post.
A couple of years ago I bought an inexpensive pocket vape (Airistech Herbva X) that came with the mini-bubbler which I never used.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Good Vibes Boro listed plenty of new TM stems and hooks for sale on his site!
I was unable to resist this^ stunner...
I was unable to resist this^ stunner...
840_divided_by_two
Well-Known Member
Good Vibes Boro listed plenty of new TM stems and hooks for sale on his site!
I was unable to resist this^ stunner...
She's a beaut! I'm debating the short stem with rubies but I have an eds TNT coming in from Vgoodiez Monday w/ borosilicate cooling balls. Gonna test drive that before dumping more $$$ into this vape lol
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
That one is glass btw they all are, the color glass is called ruby slippers
BabyFacedFinster
Anything worth doing, is worth overdoing.
Dude, that's gorgeous! The colored glass and the colored beads makes this amazing. It looks like the beads even have different colored circles on them also. Is that really gonna be a daily user or is it going in the display cabinet?Good Vibes Boro listed plenty of new TM stems and hooks for sale on his site!
I was unable to resist this^ stunner...
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
The mouthpiece is from a larger milkier piece of karmeline tubing (he previously made and sold a hook out of it like the other ones in the store now, and there is a Tetra 18 mm male hook with karmeline mouthpiece and ghost pearls in the store now... TM stems out of karmeline could happen... It is more expensive to make the piece out of full color like this though) while the karmeline pearls are from his regular stock, a bit more translucent, the circles you notice are just the lighting hitting the glass and the way the pearl swirls (karmeline in general is a creamy pink color glass)
I wish I had any sort of proper display, but I am hoping for it to be a go to TM dry stem (maximum cool for home use compared to my other straight stems from GVB and all one piece instead of separate WPA with cooler or hook) may need to sell some other stems soon!
I went with this stem 
kiddvudu2
Well-Known Member
I wish someone would make a beaded and dimpled glass TM stem that is shaped more like a "U". Maybe I will have to draw something on paper, but I'm envisioning a single-piece rig that will allow me to use the TM2 inverted. With the shape being more like a "U" its overall length could be shorter than the larger-angle bent ones. I would also hope the tighter angle of the "U" might increase cooling.
I think your best bet on this would be to reach out to GVB. He's the only person I know that makes the beaded TM stems and he already does the 45 degree angle ones.
For myself, using it inverted like that, I would prefer it on a sidecar j-hook. Easier to load/unload and all around manage. Also it's able to be used with to my other devices.
But I think your idea would look awesome and you could go to town on the colors. I think his custom queue has a bit of a wait but you should reach out to him and find out.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Keep an eye out at GVB! I told him to make exactly this, u turn stems for the TM and TP80... Meanwhile you can get right angled hooks from OGB that are awesome with both as well (it is nice to pop the vape off the piece to pull in fresh air after clearing a hit)
sickmanfraud
Well-Known Member
FYI,
TheRogueWaxWorks just dropped more TM Mouthpieces.
@kiddvudu2 this is a shorter hook. Not a V.
TheRogueWaxWorks just dropped more TM Mouthpieces.
@kiddvudu2 this is a shorter hook. Not a V.
Tinymight j Hook With Carribean Blue And Blush Cooling Balls + An Ashwood Mouthpiece Made By @WoodyVapors – Store
Free shipping within the USA! International buyers will be invoiced for additional shipping charges with $10 deducted from the total cost
goodvibesboro.com
focalforlife
Well-Known Member
Late to the party again,FYI,
TheRogueWaxWorks just dropped more TM Mouthpieces.
@kiddvudu2 this is a shorter hook. Not a V.
Tinymight j Hook With Carribean Blue And Blush Cooling Balls + An Ashwood Mouthpiece Made By @WoodyVapors – Store
Free shipping within the USA! International buyers will be invoiced for additional shipping charges with $10 deducted from the total costgoodvibesboro.com
840_divided_by_two
Well-Known Member
840_divided_by_two
Well-Known Member
I had my eye on that one too! One of those is next for my at-home cooling solution. The pill stem will be my EDC with my cocobolo from eds. Might buy some silicone caps and pre-load them with THC/CBD, respectively
kiddvudu2
Well-Known Member
So, I had my TRWW TMS13 TinyMight WPA loaded up with a combo of 6mm and 8mm quartz beads capped on each end with a screen and it was perfection as far as I could tell when using thru my Fun Guy perc. But it was time to clean it and I decided to remove the beads (as I've read @Shit Snacks say they are not really necessary if using thru a dry water piece) and do an experiment. Well, I definately notice the resistance decreases, but so does the amount of visable vapor I'm able to produce now. Very odd. I thought I'd see the opposite. I've tested with one of my other stems and everything seems to still be working normally with it. Not sure what is going on, so I'm putting the beads back in today and will see if it goes back to the way it was before. I preferred the slightly more restricted resistance anyway.
kiddvudu2
Well-Known Member
I was actually thinking along the same lines. Like the backpressure holds the heat near the herb for longer, creating a bit of conduction (as you say). If I remember correctly, I believe the WPA wasn't as hot as usual either - lending credence to your hypothesis. I'll report back after replacing the beads later today.
MrBaked.co
Well-Known Member
Had the TM2 for a couple of weeks now and I have to say I am so impressed. I hated the V1. Sold it pretty quick but this thing is a game changer to me. Microdosing King of the world in my setup which is exactly what I'm after.
Binned the titanium and glass stems as well as the daft cooling unit for this bad boy wood stem..
Woody vapes stem with Revolve gen 1, and filled to the top with glass baws, then capped with the TM basket which is where I put my weed. I have to say it is half the heat at most of both my glass and my titanium stems with either cooling unit or glass balls in it.
Absolute game changer and easily my #1 setup now.
for the people that are no longer getting the titanium stem you can buy mine although i definitely wouldnt recommend it becausue its as good as scrap metal.
Binned the titanium and glass stems as well as the daft cooling unit for this bad boy wood stem..
Woody vapes stem with Revolve gen 1, and filled to the top with glass baws, then capped with the TM basket which is where I put my weed. I have to say it is half the heat at most of both my glass and my titanium stems with either cooling unit or glass balls in it.
Absolute game changer and easily my #1 setup now.
for the people that are no longer getting the titanium stem you can buy mine although i definitely wouldnt recommend it becausue its as good as scrap metal.
I only have a original TM, but I had thought that the TM2 was pretty similar from the reports in this thread. What made you go from hate to love between the two?
MrBaked.co
Well-Known Member
I honestly don't know mate. It was when it first came out so a while ago now.
I just wasn't blown away with it and ended up selling it and going back to my dynavap and tubo dual.
I kept resisting the 2 but the more and more I seem I figured it was worth another punt.
beyond6strings
Just another traveller in the Cannaverse
I got a 3-pill dimpled stem a couple of weeks ago and it's the bomb on my OG TM. I think you're going to love it. The smaller aperture of the dimple really ups the performance IMO. I have a 1-pill dimpled stem that is also a beast, and I use that when I really want to taste everything. Both dimpled stems hit really hard.
I just ordered a MP from HA to add to my 6-pill stem, and hoping that the reduced aperture gives the 6-pill stem the same mojo my 1- and 3-pill dimpled stems have.
I cannot wait to try them all out on my TM2 when it arrives from @VGOODIEZ sometime in the next few days. Scott is such a wonderful guy; I enjoy supporting his business.
It's really sweet knowing I'll have both iterations of the TM. I imagine I'll use my OG for out and about, away from the house where most accidents of mine seem to happen, and use the 2 as my at home DD.