TinyMight / TM 2

[Cheebsy]

I bought a TM two weeks ago, i love it.
But i'd like to replace the cooling chamber (not that difficult to clean, but could be easier) with something like the elev8R chamber that is 100% made of glass, do you know a compatible mouthpiece for the Tinymight that would look like that?

It's not very portable but a WPA and a j hook is pretty hard to beat imo.

 

[Djsleepy]

It's not very portable but a WPA and a j hook is pretty hard to beat imo.

True words!

 

[ezpz]

It's not very portable but a WPA and a j hook is pretty hard to beat imo.

True words!

I agree.

 

[Sour Dream]

I missed that one! Thanks i'll go and look for it
I found the Grav one that looks good too https://grav.com/products/16mm-grav-octotaster-clear

This is what i use if i don't need the portability of the short stem

 

[cybrguy]

It's not very portable but a WPA and a j hook is pretty hard to beat imo.

The only j-hook I currently have is a 14mm Grav that I got with my Lotus (which broke and I replaced with the same one).

I have been lusting for a few of OGBs designs but it will have to wait for a while as Goo Roo busted my cache. It would have to be a spiked one as I don't think I could take the heat of a normal one, ergo my regular use of water.

 

[Shit Snacks]

The only j-hook I currently have is a 14mm Grav that I got with my Lotus (which broke and I replaced with the same one).

I have been lusting for a few of OGBs designs but it will have to wait for a while as Goo Roo busted my cache. It would have to be a spiked one as I don't think I could take the heat of a normal one, ergo my regular use of water.

Well I must pipe up to say though, the OGB sidecar hook, with its double right angle and another angle by the mouthpiece, actually does more for cooling than the basic spikes in my experience! Also it is actually the cheaper option, based off my custom design, specifically for the TM!

https://oregonglassblower.com/14mm-GLASS-SIDECAR-J-HOOK-LARGE-DIAMETER-LEFT-J-HOOK-SIDECAR.htm

(you can also ask him to customize to 18mm female by request in notes if you want that... The spiked L hook, is a bit more versatile though, for your modular bubblers)

 

[JCat]

This is what i use if i don't need the portability of the short stem

I wanted to order a couple of these but no option to ship to Canada

 

[Sour Dream]

I wanted to order a couple of these but no option to ship to Canada

Try a reseller, I think there are imitations on dhgate too

 

[BestBuds]

I placed an order for a glass collar and long stem on June 6th and it's still pending. Is he still backed up on accessories?!

 

[Stu]

I wanted to order a couple of these but no option to ship to Canada

Use my address instead.

I'll forward it up to you. Probably.

 

[Shorner]

My Tinymight has been shipped, ordered on the 10th shipped on 16th, im well pleased

 

[Anuiel]

My Tinymight has been shipped, ordered on the 10th shipped on 16th, im well pleased

Awww yes, ordered on the 14th and changed to the 'shipped' status today for me. I'm hyped

 

[Bläzeth]

After some time to think, I decided to pull the trigger and buy one. The number on my purchase is frightening, and it puts the dimension of this vaporizer on another level to me, looking more like an industrialized item than a artisan vaporizer, i mean 101k is a huge number . Hope this will help me quit combustion and maybe tabbaco, i don't smoke for some weeks, forced tolerance break, and am only smoking heated tabbaco. Going for one of the best portable vaporizer out there as my first vape is my plan to avoid buying alot of vaporizers as i think this one could be considered as a Jack of all Trades. Made the order 20/06/2021, got the Completed status on 21/06/2021 and it was shipped today 22/06/2021.

 

[Anuiel]

@Bläzeth haha I noticed that too, though personally I'd consider my order being the 1955th more likely than it being the 101955th.

 

[Shorner]

Awww yes, ordered on the 14th and changed to the 'shipped' status today for me. I'm hyped

DHL have gave me a delivery day of the 24th!!

 

[cybrguy]

His order numbers don't look to be consecutive for all orders placed. He seems to group them by regions, so the current order numbers aren't an indication of how many units he has sold in all. At least that is how it appears.

 

[Shit Snacks]

Good to have the update that shipping is resumed and they're back in stock ish? Reminder about this thread though

TinyMight Ordering & Shipping Thread

Anyone gotten a tiny might here recently? If so when was your order date?

fuckcombustion.com

 

[WisePenny]

I'm not asking for perfection and I'm forgiving--perfectly willing to overlook half of the issues listed here--but when I see many reports with similar issues, I pay attention.

Reviewers getting hand-picked units that fail by their own admission concerns me, and would suggest an issue with the design itself. I understand that you are fond of this vape and I appreciate that. I have no doubt that, if you get a working unit, its a great vape.

I have no vested interest beyond being a satisfied customer, however the guy from that reddit thread has been attacking and disparaging the TM and the manufacturer around various forums, including here before being banned (please correct me if I am wrong), for the past 2+ years.

He certainly likes the term "countless reports" doesn't he?
That's all I have to say about that - I don't want any of the drama.

Personally, my 2 TMS are working great - 15 months & 8 months. I ordered a 2nd wooden ed's stem and I am set!

 

[GoldenBud]

Hey
I am trying to help a friend with some problem - he has a TM on 6.5 and it suddenly for the last few days won't get enough vapor
other than trying another batteries, can somebody give me a small debug what to do? where to check if it's cleaned? etc?
maybe to open something dunno?
thanks
PS
I just know from reading from time to time that something needs to be checked inside the TM if smb is having low amount of vapor ... question is how deep to go

 

[Bad Dog]

Hey
I am trying to help a friend with some problem - he has a TM on 6.5 and it suddenly for the last few days won't get enough vapor
other than trying another batteries, can somebody give me a small debug what to do? where to check if it's cleaned? etc?
maybe to open something dunno?
thanks
PS
I just know from reading from time to time that something needs to be checked inside the TM if smb is having low amount of vapor ... question is how deep to go

First thing to try is to clean the battery cap, its threads and the threads on the unit, as well as the battery, the best tool for the job is a white eraser. If that doesn't work there's a problem with the battery contact strip, simplest solution is to loosen the screw and wiggle the top plate, then retighten the screw very tight but be cautious of the thin o ring that sits on top of the glass oven liner and underneath the top plate. If that doesn't work he needs to take off the top cap and shim the battery strip with a small piece of aluminum foil. Good luck

 

[ezpz]

First thing to try is to clean the battery cap, its threads and the threads on the unit, as well as the battery, the best tool for the job is a white eraser. If that doesn't work there's a problem with the battery contact strip, simplest solution is to loosen the screw and wiggle the top plate, then retighten the screw very tight but be cautious of the thin o ring that sits on top of the glass oven liner and underneath the top plate. If that doesn't work he needs to take off the top cap and shim the battery strip with a small piece of aluminum foil. Good luck

Great post @Bad Dog
Forgot one. Not a usual suspect but it does affect vapor production. Gotta make sure the o-ring stem holder is tight. Not so tight that its difficult to move the stem, but not loose either. The ones @Bad Dog listed are the more common fixes though.

 

[SonicBacon]

I wanted to order a couple of these but no option to ship to Canada

I reached out to Mike at OGB and he will ship to Canada no problem. Try to send him an email if you are still interested theoregonglassblower@gmail.com

 

[Bad Dog]

Was a tinymight kind of day and it's moving into a tinymight evening! Cracked open my last 5g's of pie in the sky since it's coming back in stock at Broken Coast soon! Made for a very lovely day

 

[Chicken No Name]

First thing to try is to clean the battery cap, its threads and the threads on the unit, as well as the battery, the best tool for the job is a white eraser. If that doesn't work there's a problem with the battery contact strip, simplest solution is to loosen the screw and wiggle the top plate, then retighten the screw very tight but be cautious of the thin o ring that sits on top of the glass oven liner and underneath the top plate. If that doesn't work he needs to take off the top cap and shim the battery strip with a small piece of aluminum foil. Good luck

I used a few cotton buds with iso on the threads of the battery cap and body last night. Surprised at the amount of crap that I cleaned. Cap screws on much better now....

 

[Bad Dog]

I used a few cotton buds with iso on the threads of the battery cap and body last night. Surprised at the amount of crap that I cleaned. Cap screws on much better now....

If you think that is something check this out
The underside of my top cap after only a month of use so I can really only assume it pretty much came this way from the factory! Notice the dull colour and grey blotches around the screw hole and by my thumb.

now see the clean shiny stripe by my thumb

And finally a clean cap

Performance jumped up by 3 temperature settings upon reassembly !