kadjo
Well-Known Member
Thanks @Shit Snacks. Glad it can hold up. Sorry for all the typos in my post! I try to run a tighter ship.
Sorry to hear about all of these issues. I actually just ordered a second tiny wait a few days ago as I have really been enjoying mine a lot lately and felt that I would like to have a backup if it ever goes out. Part of my VAS is a desire to have a backup of more of the artisan vapes. I too have come to just wait patiently. However it is always discouraging tob hear thatbpeople have stopped getting responses altogether.
I also want to apologize if this is a repost as I thought I put it up earlier but I'm not seeing it now.
Has anyone ever dropped their tiny might?
I had my 1st, and hopefully last drop, today. It fell out of my pocket as I was sitting down and hit the floor. I switched the battery and repacked it. Event seems to be working fine now.
I just didn't know if there was anything to look out for, that may go wrong in the future, or if anyone else has had that experience.
It seems pretty sturdy just a circuit board and stainless steel heater but I always worry when these things fall.
Thanks in advance for any feedback.
My TM fell about 2ft on to carpet, top glass liner broke into 2 pieces. It still functions. No response from maker after a month. looking for a small hard case
You can't use it whilst it's in that case though! I have the RYOT with the built in slick flap and that one is far more padded and has pockets for accessories but ultimately the same problem.I use this Ryot hard shell case, it's almost the perfect size for the TM with the short mouthpiece in. The only thing that would make it better is if it was slightly bigger so you could fit a spare battery in there but it's not a major issue.
Hard Shell Krypto-Kit
The RYOT Hard Shell Krypto-Kit is the most popular pocketable storage system for glass bats and small vapes ever designed.ryot.com
You can't use it whilst it's in that case though! I have the RYOT with the built in slick flap and that one is far more padded and has pockets for accessories but ultimately the same problem.
A rubberized wrapper for the TM to absorb impact when being used would be great. I played around with Sugru, that's the DIY option, but I settled on rubber bands in the end.
You can't use it whilst it's in that case though! I have the RYOT with the built in slick flap and that one is far more padded and has pockets for accessories but ultimately the same problem.
A rubberized wrapper for the TM to absorb impact when being used would be great. I played around with Sugru, that's the DIY option, but I settled on rubber bands in the end.
None of that stuff on the outside of the vape will save the internals from a drop impact.
Keeping it in a padded case can....but I'm more interested in what you put around all your glass rigs to protect them from drop breakage?
Cork. I forgot who but he’s posted several times his cork cover with built in stirrer which is a pin or tiny thin nail. Very clever! Minus the stirrer I’d love to make that. I did order some rubber or plastic stem caps and a stem plug for the chamber itself. Haven’t received them yet.Keeping it in a padded case can....but I'm more interested in what you put around all your glass rigs to protect them from drop breakage?
I told you dude, it *wants* to vibrate and if it is anything like mine will eventually start again on it's own when it is ready.Cork. I forgot who but he’s posted several times his cork cover with built in stirrer which is a pin or tiny thin nail. Very clever! Minus the stirrer I’d love to make that. I did order some rubber or plastic stem caps and a stem plug for the chamber itself. Haven’t received them yet.
I did drop my TM once about 2 feet into soft dirt, stem first. Nothing broke and the stem got dirty. This was several weeks ago and I hadn’t any issues with until this week when the haptic motor gave out...
So this morning I waked and baked with the TM just before a grinding session (I tend to grind flower and several strains if I have at one time, which I currently do) as is customary for me. Hehe. I was finishing a load in on demand mode and I swear for a second on the last draw the haptic motor kicked in for a fleeting second when up to temp (close to 8). Perhaps my TM has a faint pulse? It didn’t vibrate when I turned it off however. Still waiting to hear back from The Maker (reached out now this week by email and Instagram). Let’s see how long this will take. The silver lining is that my TM is still operable just without the haptic motor.
Does anyone know of a one piece stem that would fit a 14mm rig, Like to use on a SP Globe and not have to use an adapter?
So, I used the TM exclusively last night and I like it a lot. About the size (little smaller) of my Milaana but fully regulated so no chance (unless careless) of combustion. I never got above 8 on the temp setting so far. I got a bit higher than intended so had to stop testing, but there will be much more of that as I get used to the device. No complaints so far. I set up a short RBT stem to mate it with water and that worked just fine. I used a cup screen in it that I had from some other device. I will look through my stuff for a bigger/deeper one as this one is kinda small, loading way less than .1g.
Feels great in the hand. Very pocketable. I think we are gonna get along well. I don't think it will take over completely my other devices because I have many I enjoy, but it is safe to say the TM will certainly be a big part of the rotation. I can see that it may become a primary vape for out and about.
Cork. I forgot who but he’s posted several times his cork cover with built in stirrer which is a pin or tiny thin nail. Very clever!
Press the dial when turning on... if it work rotate the dial min to max several times with a small screwdriverHi
My TinyMight stopped working after 4 or 5 months of hard use. I bought it directly from the company and I sent them an email from there website and I haven't heard anything after 4 weeks. I was giving them sometime due to Covid. I loved the vape and used it heavily but now when I go to turn it on it just vibrates for a second and then nothing. I've tried multiple different batteries. I've cleaned the contacts. I have no idea what the issue is. Has anyone else had this happen and what is the company doing about this?
David
For anyone asking about the temperature dial.
There are 20 temperature steps in total the only unknown being what the starting point is. I can turn the unit on and then turn the temperature down so I'll assume 0.5 is the lowest setting for simplicity.
Each step will increase temperature by 6.316°C/11.053°F if it's linear so let's say 6.3°C/11°F and call it close enough.
Dial - Temp. °F - Temp. °C
0.5 - 250°F - 120°C
1.0 - 261°F - 126.3
1.5 - 272°F - 132.6
2.0 - 283°F - 138.9
2.5 - 294°F - 145.2
3.0 - 305°F - 151.5
3.5 - 316°F - 157.8
4.0 - 327°F - 164.1
4.5 - 338°F - 170.4
5.0 - 349°F - 176.7
5.5 - 360°F - 183.0
6.0 - 371°F - 189.3
6.5 - 382°F - 195.6
7.0 - 393°F - 201.9
7.5 - 404°F - 208.2
8.0 - 415°F - 214.5
8.5 - 426°F - 220.8
9.0 - 437°F - 227.1
9.5 - 448°F - 233.4
10.0 - 459°F - 239.7