TinyMight / TM 2

[Tweakz]

Are you using the sony VTC6?

of course I use the original sony vtc6 battery. before the showdown, everything was just fine.

There is an o-ring at the top of the glass tube (the widest ... which is in contact with the wood) which is difficult to place correctly.

most likely I did not have a leak and this is the same white o-ring that was on the top of the glass still can not put it correctly. that's probably the reason .

 

[scooterboy]

Sorry - just found this thread and glanced through the first few and last few pages. Will read the whole thing later.

Am I correct in assuming that there are no stateside retailers for this vape, and it has to be ordered from the Finnish maker's website?

 

[TommyDee]

...yet. I'm still waiting for KGWoodcrafts @khelek41girl to gain stock. The wait appears to be worth it as improvements to the product are being implemented.

 

[farmerpalmersnt]

Put an oring and a tungsten carbide band on my shortened rbt stem. Just to give a bit of protection!!

 

[Chandler]

Can someone post some pictures of A tinymight up next to other current heavy hitting portables to put into context it's size? Appreciated!

 

[dimmusp]

...yet. I'm still waiting for KGWoodcrafts @khelek41girl to gain stock. The wait appears to be worth it as improvements to the product are being implemented.

Hmm! Such as?

 

[Tweakz]

@Momor , @dzoinp -
I have already reassembled it 10 times and nothing works. as if the heater is working very very poorly or the air does not get in or is not hermetically collected.

does this white o-ring have to be right on top of the glass, or does it have to be clad along the outline ? I took your recommendations into account, but still.
prior to that, everything was wonderful. someone help me

 

[TommyDee]

Hmm! Such as?

Properly recessed screw; properly treated wood housing; mindful of protrusion of the adjuster dial; updated firmware to allow temp offset; optional quartz outer-tube in the air-path; insight from other user; and the peace of mind that this is now a well reviewed vape that seems to be ticking a lot of boxes. So while I am inventing things for VapCaps and Magic Flight Launch Boxes, I can wait for supply to catch up. When KG Woodcrafts gets them in stock, I have PayPal waiting.

I still want a sticky felt pad for the base though

 

[LabPong]

Can someone post some pictures of A tinymight up next to other current heavy hitting portables to put into context it's size? Appreciated!

quick google query indicates.......page 69.

 

[RustyOldNail]

Properly recessed screw; properly treated wood housing; mindful of protrusion of the adjuster dial; updated firmware to allow temp offset; optional quartz outer-tube in the air-path; insight from other user; and the peace of mind that this is now a well reviewed vape that seems to be ticking a lot of boxes. So while I am inventing things for VapCaps and Magic Flight Launch Boxes, I can wait for supply to catch up. When KG Woodcrafts gets them in stock, I have PayPal waiting.

I still want a sticky felt pad for the base though

Shame, the battery cap was not updated. Still need a coin to open it. I hope the threads are not to thin. I had an HGCigar VTNano DNA75 mod, that most like me had horrible issues just getting it on and off, without stripping the overly thin threads. At least that cap had a spring loaded lever so you didn’t need a “coin” to swap batteries.

 

[gracingfields]

my tinymight is doing somthing strange. as soon as i torque the battery bay screw enough and the connection is made I get a constant green led. the unit seems unresponsive. anyone else experience this?

 

[Tweakz]

looks like my honeymoon ended prematurely
I've already written to Ville about this . maybe it's because the o-ring that should be at the end of the glass holder is incorrectly installed. either I touched the heater (which is hidden), or what? is this the end ?

 

[dzoinp]

the o-ring that should be at the end of the glass holder is incorrectly installed

remove the top aluminum panel...the o-ring must be placed from inside of the top panel... it looks too big to fit but it actually fits!

finally, correctly aligns the wood with the lids

Still need a coin to open it

it doesn’t need to be tight to need a coin.
when squeezing I use only the thumb or forefinger together with the middle one. I press down and squeeze until it stops. to loosen it is the same. without aesthetic damage

 

[scooterboy]

Sorry - just found this thread and glanced through the first few and last few pages. Will read the whole thing later.

Am I correct in assuming that there are no stateside retailers for this vape, and it has to be ordered from the Finnish maker's website?

Well I pulled the trigger. Now we wait...

 

[Shit Snacks]

Shame, the battery cap was not updated. Still need a coin to open it. I hope the threads are not to thin. I had an HGCigar VTNano DNA75 mod, that most like me had horrible issues just getting it on and off, without stripping the overly thin threads. At least that cap had a spring loaded lever so you didn’t need a “coin” to swap batteries.

Yeah a coin is not needed, can get good grip with it upside down and a gentle press as it is springy. The threads are not thin, wide enough that the springyness makes it feel easy to turn loosely and no need to even make it tight. I was worried about this in particular, and have been pleasantly surprised! This part is well designed

 

[SquirrelMaster]

Yeah a coin is not needed, can get good grip with it upside down and a gentle press as it is springy. The threads are not thin, wide enough that the springyness makes it feel easy to turn loosely and no need to even make it right. I was worried about this in particular, and have been pleasantly surprised! This part is well designed

No issues here either and I turn my battery cap until it's flush with the device i.e. much farther than I probably need too.

@Tweakz
The top clear o-ring should install like this. Is that how you've been putting it back in?

Also did you remove the screw that connects the circuit board to the heater or did you leave that area untouched? If you take it apart again take a video or pictures or something and maybe there's an area you're over looking?

 

[gracingfields]

can anyone shed any light while my unit wont work. it just displays a constant green led.

 

[Shit Snacks]

Took out that other weird custom 18mm female mouthpiece I have, got from same member here who gave me the dark blue one, customs they made themself. This one has some silver fuming in it, and a little teacup handle, but not as much of a curve to break the vapor and honestly not as much of an comfortable mouthpiece... I believe these were originally made for their cloud evo, I used to prefer this one but now I think I prefer the blue for the tinymight, though of course neither can compare to the green drydrotube which I hope to resurrect someday. Still highly recommend the mini j hook from lamart too, they come in a variety of colors and are very reasonably priced, easy favorite for TM glass:

Meanwhile I finally figured out a way to mod a 14mm adapter to use with my TM, though I mostly have 18mm glass (forgot to mention I did try my TM through Evolver HydraCirc hydrotube very effectively) using wpa for the MistVape Imp with a bit of silicone tubing to make the seal and keep the stem secure... It does mean a narrower bowl though (narrow path behind the screen too like that grav upline) so I have been finishing in 1-3 hits, so far mostly with a second screen for extra protection:

So I can hit it through this old Pinnacle watertool 14mm hydrotube. Pretty nice experience, almost makes me miss the dtube less, almost

I am lucky to have so many glass path options, yet somehow I still want even more!

 

[TommyDee]

Something may have glitched the microprocessor and needs a reset. Contact the maker and he will get this resolved.

 

[murf2010]

Anyone ever use shatter wax or any concentrates with this?

 

[Glatch]

@Momor , @dzoinp -
I have already reassembled it 10 times and nothing works. as if the heater is working very very poorly or the air does not get in or is not hermetically collected.

does this white o-ring have to be right on top of the glass, or does it have to be clad along the outline ? I took your recommendations into account, but still.
prior to that, everything was wonderful. someone help me

just a tip
If I would have this problem and couldn't get it working again, I would try to film the assembling process and mail it to the creator asking if you did something wrong.

 

[Tweakz]

@dzoinp , @SquirrelMaster , @Momor -
I want to thank you guys from the bottom of my heart. thank you very much for your quick and detailed help. Everything is working again! smooth thick clouds returned home ! I am extremely happy ! Alleluia

in the end, as it turned out, I just incorrectly assembled the device, creating a leak-proof air flow. I'm glad it turned out to be much easier than I thought.

who has not yet disassembled, but will, I advise you to carefully remember the sequence of details and securely put everything back. not really difficult .

I wish you all good health and a good weekend !

just a tip
If I would have this problem and couldn't get it working again, I would try to film the assembling process and mail it to the creator asking if you did something wrong.

in fact my hands are just a needle from the wrong place
and I'm ashamed that I have this kind of problem at all, if it can be called a problem at all. for I simply could not hermetically assemble simple parts in a row many times. in the end, everything is great. I'm glad you helped me quickly

 

[btka]

Is this vape made by the guy who made the venus and apollo vape?

 

[Vaporware]

Is this vape made by the guy who made the venus and apollo vape?

Yes. There has already been a lot of argument surrounding that though (and some people who are happy about it), so if that’s a problem for you please discuss it outside of this thread. Other people already talked about it for many pages before Stu had to ask them to stop.

By all accounts customer service for the TM has been very good so far if that’s a concern for you.

 

[btka]

Yes. There has already been a lot of argument surrounding that though (and some people who are happy about it), so if that’s a problem for you please discuss it outside of this thread. Other people already talked about it for many pages before Stu had to ask them to stop.

By all accounts customer service for the TM has been very good so far if that’s a concern for you.

no it is not a problem... saw pictures of tinymight and heared it is from finland.. was just curious...