The "Stunner"

2

2pumpchump

Well-Known Member
TedJones said:
@2pumpchump nice one ! Are you using the high flow cap or sniping that concentrate on the low flow? Also, does your water get dirty quickly without a stem insert/cooler or a rig drop down/catcher?
Click to expand...
Full disclosure that cap is a standard air flow it's filled with mostly 2mm ZrO2 and a few 3mm sic!!
To answer the other question yes my water pipes get dirty really fast even with straight flower I have been looking at some catches
 
2pumpchump,
  • Like
Reactions: TedJones
tinctorus

tinctorus

Well-Known Member
Accessory Maker
Wanted to let everyone know that I'm currently running a BOGO sale on all balls on my site, you can choose the same or 2 different sizes/types if you want
Just leave a comment

Also running a sale till the end of the month for 10% off a stunner setup using the code "THANKYOU"
www.instagram.com

Vapor Solutions on Instagram: "Use code "THANKYOU" FOR 10% OFF"

40 likes, 7 comments - vaporsolutions2 on March 14, 2024: "Use code "THANKYOU" FOR 10% OFF".
www.instagram.com www.instagram.com

www.instagram.com

Vapor Solutions on Instagram: "This weekend ALL CERAMIC BALLS ARE BOGO! no code needed"

14 likes, 0 comments - vaporsolutions2 on March 14, 2024: "This weekend ALL CERAMIC BALLS ARE BOGO! no code needed".
www.instagram.com www.instagram.com
 
AndyO

AndyO

Well-Known Member
Got Wesley's deal on the Dani Fusion 2.0 + Stunner.

I've been enjoying a couple of bowls with the Dani and getting a nice buzz. Then I had a couple of Stunner bowls when it got dark enough to see the flame properly and it's melting my face off.

I'm having a nightmare fidgeting with O-rings trying to get them to fit Dani stems, it's nowhere near as sealed as it should be.
 
D

Dopamine

Active Member
I am definitely not happy with the way my stunners fit in any stem. What is also really annoying is that the cap does not screw down to the shoulder of the tip, poor machine work on the tips. The high flow cap is fine however.

A different vape pretty similar to the stunner has a much nicer tip that is more a finished product to me.
 
Dopamine,
AndyO

AndyO

Well-Known Member
Dopamine said:
I am definitely not happy with the way my stunners fit in any stem. What is also really annoying is that the cap does not screw down to the shoulder of the tip, poor machine work on the tips. The high flow cap is fine however.

A different vape pretty similar to the stunner has a much nicer tip that is more a finished product to me.
Click to expand...

As I said, I had trouble with mine - it took quite a bit of experimentation with O-rings. But I have it fitting the 8m adapter now, which I have fitting my Revolve stem; I also have the Stunner set up with the older (carb hole) version of the Dani wood stem, which works really well... but it's going to be a pain in the ass to clean. So this has ended up being a catalyst for a 2nd Revolve stem. I was already thinking about it, cos I love it so much, and it's the easiest thing to clean that I can use with the Stunner.

(I have no idea why it fits the old wood stem and not the new titanium stem, but it's not even close, it falls out almost without any resistance. Fortunately I don't love new Dani titanium stem and haven't found myself using it for the Dani Fusion 2.0 either.)

The biggest problem I'm now having is overheating. It doesn't turn to ash when it combusts like a Dynavap, but it happens so quickly and tastes so gross when it happens, and you're just left with a combusted black plug.
 
AndyO,
tinctorus

tinctorus

Well-Known Member
Accessory Maker
Dopamine said:
I am definitely not happy with the way my stunners fit in any stem. What is also really annoying is that the cap does not screw down to the shoulder of the tip, poor machine work on the tips. The high flow cap is fine however.

A different vape pretty similar to the stunner has a much nicer tip that is more a finished product to me.
Click to expand...
Fwiw the cap isn't supposed to screw all the way down
 
tinctorus,
tinctorus

tinctorus

Well-Known Member
Accessory Maker
AndyO said:
As I said, I had trouble with mine - it took quite a bit of experimentation with O-rings. But I have it fitting the 8m adapter now, which I have fitting my Revolve stem; I also have the Stunner set up with the older (carb hole) version of the Dani wood stem, which works really well... but it's going to be a pain in the ass to clean. So this has ended up being a catalyst for a 2nd Revolve stem. I was already thinking about it, cos I love it so much, and it's the easiest thing to clean that I can use with the Stunner.

(I have no idea why it fits the old wood stem and not the new titanium stem, but it's not even close, it falls out almost without any resistance. Fortunately I don't love new Dani titanium stem and haven't found myself using it for the Dani Fusion 2.0 either.)

The biggest problem I'm now having is overheating. It doesn't turn to ash when it combusts like a Dynavap, but it happens so quickly and tastes so gross when it happens, and you're just left with a combusted black plug.
Click to expand...

Dopamine said:
The cap screws down in this photo.
Click to expand...
That's an old picture when I was using push in mesh screens
The new ones with the screw in are not meant to go down all the way
 
tinctorus,
AndyO

AndyO

Well-Known Member
I sustained my first real serious burn using the Stunner yesterday :(

This just isn't something that you can do back-to-back bowls on. Regardless of what stem I put it in it rotates when you twist the cap, and using 2 hands/leather straps/whatever doesn't work immediately either, the heat stops you untwisting it.

It's a pretty mean looking burn on my finger.
 
SockPuppetTheatrics

SockPuppetTheatrics

Well-Known Member
I tried searching the thread and couldn't find an answer: does the Vestratto USA work with the stunner head? It looks like the custom-made Stunner adapter must've sold out.
 
SockPuppetTheatrics,
  • Like
Reactions: Vangel
tinctorus

tinctorus

Well-Known Member
Accessory Maker
SockPuppetTheatrics said:
I tried searching the thread and couldn't find an answer: does the Vestratto USA work with the stunner head? It looks like the custom-made Stunner adapter must've sold out.
Click to expand...
The device works native in 9mm sized stems, I believe the anvil piece adapts it to 8mm?
Unfortunately I'm out of the 9/8mm adapters at as well
 
tinctorus,
  • Like
Reactions: Vangel
0xfalk

0xfalk

Butane powered weedmob
What a great thread, I‘ve read through it and got a stunner last sunday. Can’t wait to have it and to share it with friends. I guess you will have some orders from Germany coming in soon :)
 
tinctorus

tinctorus

Well-Known Member
Accessory Maker
www.instagram.com

Vapor solutions on Instagram: "I've got a very limited number of anodized standard flow setups available, only have 2 of each color at as these are a test run The anodizing will hold up to most torching unless you heat it past the point of the color,

97 likes, 6 comments - vapor.solutions on September 22, 2024: "I've got a very limited number of anodized standard flow setups available, only have 2 of each color at as these are a test run The anodizing will hold up to most torching unless you heat it past the point of the color, IH use...
www.instagram.com www.instagram.com


Had a few anodized setups done, still have a few colors available if anyone is interested
 
D

Dopamine

Active Member
tinctorus said:
www.instagram.com

Vapor solutions on Instagram: "I've got a very limited number of anodized standard flow setups available, only have 2 of each color at as these are a test run The anodizing will hold up to most torching unless you heat it past the point of the color,

97 likes, 6 comments - vapor.solutions on September 22, 2024: "I've got a very limited number of anodized standard flow setups available, only have 2 of each color at as these are a test run The anodizing will hold up to most torching unless you heat it past the point of the color, IH use...
www.instagram.com www.instagram.com


Had a few anodized setups done, still have a few colors available if anyone is interested
Click to expand...
Will it change color when you put a torch to it?
 
Dopamine,
  • Like
Reactions: tinctorus
Sour Dream

Sour Dream

Blue Dream enthusiast
tinctorus said:
www.instagram.com

Vapor solutions on Instagram: "I've got a very limited number of anodized standard flow setups available, only have 2 of each color at as these are a test run The anodizing will hold up to most torching unless you heat it past the point of the color,

97 likes, 6 comments - vapor.solutions on September 22, 2024: "I've got a very limited number of anodized standard flow setups available, only have 2 of each color at as these are a test run The anodizing will hold up to most torching unless you heat it past the point of the color, IH use...
www.instagram.com www.instagram.com


Had a few anodized setups done, still have a few colors available if anyone is interested
Click to expand...
They look dope
 
Sour Dream,
  • Like
Reactions: tinctorus
Oden

Oden

Well-Known Member
tinctorus said:
www.instagram.com

Vapor solutions on Instagram: "I've got a very limited number of anodized standard flow setups available, only have 2 of each color at as these are a test run The anodizing will hold up to most torching unless you heat it past the point of the color,

97 likes, 6 comments - vapor.solutions on September 22, 2024: "I've got a very limited number of anodized standard flow setups available, only have 2 of each color at as these are a test run The anodizing will hold up to most torching unless you heat it past the point of the color, IH use...
www.instagram.com www.instagram.com


Had a few anodized setups done, still have a few colors available if anyone is interested
Click to expand...
Does your stunner work with the Wand like the Tempest?
 
Oden,
You must log in or register to reply here.
Top Bottom