Discontinued The Persei Vaporizer for herbs and concentrates.

Hey all --- Im still getting used to all with the Persei :)
So far I'm super Happy n even more happy I got the core -- It is essential - !!!!! Im still waiting to make sure a dead battery is my other issue with making it 7.4v- but again the core took care of that issue :)

I have been enjoying the 7.4 kiss cart .. since my old 3.7 kiss burnt out a while back (cannot wait 2 rebuild & get a spare !) interesting using the 7.4 cart -- I like it -- just pulsing !
Onto an actual different question ?

I see others discussing the Hurcules 74 .. I am just opening the brand new box today … so obviously a learning curve is coming .. but I'm excited !!!!! a drop concerned about going through more oil but worth it I'm sure !

(the box came with the assembled unit :) and a nice tool in the box - also had 2 extra coils it appears - and then the box has one thin extra space and I was wondering if something belongs in that space ? or is it just a thin extra spot in the box in case it was needed in future ? )

Yet I ask this ? --- because I see people speaking about a 3.7v setup ? I was under the impression this was to be used as 7.4volts and honestly didn't think it was able to work well at 3.7v ? Then I went to website and I see they have a ceramic rob for 3.7 and another for 7.4 black n white .. What does the unit come shipped with ? black or white ? 7.4 or 3.7 ?
do i order the other that wasn't shipped from w9? It would be nice if both work !
again any help / advice is welcomed and I thank you ! sorry if this was brought up in another spot .. I have not found it yet in my searching .

Peace n respect my friends !!!!!!!

Both rods work with the hercules. The white, 7.4v rod comes with the hercules.
The black rod takes like 20 seconds to heat up, and it's nice to have the option to use your ss kit with one small battery, and the hercules. It will fit in your pocket, rather than poke out of the top.
If you order the black rod, I'd suggest waiting until he releases the new touch top, which will have an on/off feature, and ordering at the same time. Otherwise, if you can't wait, you should definitely get the hammer top, with the same feature. With this on/off feature, you don't have to hold the button while the black rod heats up. You just press once to turn it on, and press it again to turn it off.

The learning curve: make sure the connections are tight with the nut, and make sure the rod is connecting. Make sure the nut rests right above the white/black part of the rod. You should see one metal section, and one white/black ceramic section.
With either rod, especially the white one, make sure you take cool down hits: around 10 seconds before the end of your hit, release the button/turn off the hammer top, and continue to inhale. This will cool the oil, saving you the trouble of gather reclaimed oil that was in liquid form after your hit.

Best of luck!
 

invisiblefriend

Well-Known Member
Manufacturer
Both rods work with the hercules. The white, 7.4v rod comes with the hercules.
The black rod takes like 20 seconds to heat up, and it's nice to have the option to use your ss kit with one small battery, and the hercules. It will fit in your pocket, rather than poke out of the top.
If you order the black rod, I'd suggest waiting until he releases the new touch top, which will have an on/off feature, and ordering at the same time. Otherwise, if you can't wait, you should definitely get the hammer top, with the same feature. With this on/off feature, you don't have to hold the button while the black rod heats up. You just press once to turn it on, and press it again to turn it off.

The learning curve: make sure the connections are tight with the nut, and make sure the rod is connecting. Make sure the nut rests right above the white/black part of the rod. You should see one metal section, and one white/black ceramic section.
With either rod, especially the white one, make sure you take cool down hits: around 10 seconds before the end of your hit, release the button/turn off the hammer top, and continue to inhale. This will cool the oil, saving you the trouble of gather reclaimed oil that was in liquid form after your hit.

Best of luck!
thx sooooo much for the tips to get past the "curve" --

thx 4 info about upcoming on/off ----- I certainly can wait on the 3.7 rod ---- I will use the hurc mostly at home I'm sure ! :) NIcE ! :)
 

AgentofChaos

Serial Vapist
I received my Persei unit from eBay today and everything looked good except for the 7.4 Kiss cart. I purchased it used and the cart is all black and looks burnt. I was wondering if this is normal or not? I tried calling W9Tech a number of times but was unsuccessful getting through. Can anyone let me know if this is normal or if the previous user made it unusable. I dropped the whole thing in ISO for a while but it didn't help.

Thanks for your help!

kiss_cart.jpg
[/url] upload a picture[/IMG]
 
AgentofChaos,

invisiblefriend

Well-Known Member
Manufacturer
if you purchased it used that is "exactly" what it should look like ----

u doing it correct

clean n u good as new "almost"

but u will b n joying the best tasting ever !


n joy my friend !
 
invisiblefriend,

AgentofChaos

Serial Vapist
I was able to get several decent hits, although they tasted like an ashtray. Now, a few hours later, it will not work at all and the cartridge is ashy. I barely used the unit and only kept the button pressed for 1-2 seconds at a time, every 30 seconds or so. Here is a new pic of the 7.4 cartridge. Has anyone ever experienced these issues?

PLEASE HELP!

http://s25.postimg.org/ar4g2mo4v/image.jpg
 
AgentofChaos,

Fredster951

Well-Known Member
^^my opinion is the previous owner did too mAny "dry burns". It will always taste like crap once the cart is dry burned too much without no wax/oil on the wick. My suggestion is buy a new cartridge and start fresh. Can't trust too many people on operating a 7.4 v kiss. They are very powerful. Another possibility is mAybe too much plant matter in the wax and the kiss cart is combusting. Hard to tell with your pic. Have a better picture?
 
Fredster951,

DieHard

Accessory supplier
Accessory Maker
I was able to get several decent hits, although they tasted like an ashtray. Now, a few hours later, it will not work at all and the cartridge is ashy. I barely used the unit and only kept the button pressed for 1-2 seconds at a time, every 30 seconds or so. Here is a new pic of the 7.4 cartridge. Has anyone ever experienced these issues?

PLEASE HELP!

http://s25.postimg.org/ar4g2mo4v/image.jpg
kISS carts are easy to rebuild. The wire, wick and insulators are available from KidneyPuncher.com. (Until there is a kit from W9 Tech.). For a crazy powerful HOT KISS at 7.4v, use 32g NiChrome wire wrapped around a 1/8" wick 5 times. Check my sig for help.
 

invisiblefriend

Well-Known Member
Manufacturer
7.4 kiss -- super power !!!!!!!! incredible taste !

I finally got the herc 74 going (WOW!!!!) and honestly so far I don't feel it uses any more product than the 7.4 kiss ? IMO -- its just a whole new level !


i have to rebuild the 3.7 kiss (maybe ill try this week ;) -- ( i burnt when I was still wasting my time with e twists :) ) i really wanna rebuild n start using shorty !!!!!!

7.4 kiss -- super power !!!!!!!! incredible taste !

I finally got the herc 74 going (WOW!!!!) and honestly so far I don't feel it uses any more product than the 7.4 kiss ? IMO -- its just a whole new level !


i have to rebuild the 3.7 kiss (maybe ill try this week ;) -- ( i burnt when I was still wasting my time with e twists :) ) i really wanna rebuild n start using shorty !!!!!!
OK OK OK



THIS HERCULES 74 THIS SR 74 IS NOTHING SHORT OF TOTAL GAME CHANGER !!!!!!!!
im kinda at a loss of words Gary ! much much respect --


ill save the Core praise for another thread :) @@@@ n this is after just 36 hours ! :)
 
Last edited by a moderator:

itschad

Well-Known Member
Should I get a kiss globe or try to hold out for the triton? my KISS cart might make it through another month with a good cleaning.


need2dabOTG though


and when will we be at a place where i can just buy somethign and then have it 3d printed damnit
 
itschad,

SamuraiSam

Extraction Technician
The Triton is still in development.. It's not even up for presale... A kiss globe is very affordable & available now...
 
SamuraiSam,

itschad

Well-Known Member
The Triton is still in development.. It's not even up for presale... A kiss globe is very affordable & available now...

@itschad I thought the Triton is a LAYG retrofit for the Okeanos


yeah, i meant the kiss inside my okeanos is getting all gross

and didnt he say we were like 45 days out or so a few days ago?

if i order now, it wont ship til monday, wont get here til thursday at the earliest

so thats only like 37 days

i dont wanna buy a cart just for a month-ish :X i cheap
 
itschad,

215z

Well-Known Member
Rebuild your cart! That aluminum shell dissipates alot of heat. The stock KISS 3.7V is wired for the modest power output of the ophos/omi-lite platform, you can wire it up to 0.8ohm for stonking performance. Even if you don't rebuild your coil, cleaning the KISS cart by disassembling it can get you back to almost-new performance.
 

itschad

Well-Known Member
Rebuild your cart! That aluminum shell dissipates alot of heat. The stock KISS 3.7V is wired for the modest power output of the ophos/omi-lite platform, you can wire it up to 0.8ohm for stonking performance. Even if you don't rebuild your coil, cleaning the KISS cart by disassembling it can get you back to almost-new performance.


I'm not opposed but I literally know nothign about how to do that or where to obtain replacement parts
 
itschad,

DieHard

Accessory supplier
Accessory Maker
I'm not opposed but I literally know nothign about how to do that or where to obtain replacement parts
Check my sig for KISS cart rebuild link. 32 gauge NiChrome Wire, FC-2000 wicks, and new insulators are available from KidneyPuncher.com
 

jeffzorz

Active Member
Have a question, Im currently out of the country and my persei top burnt out do to me button mashing while trying to get a non working 7.4 kiss to fire up. That leaves me with just my Provari, is there anything keeping it from firing up my 3.7 rod? I've got a few working 501 adaptors that work fine with my remaining kiss carts
Talking the herc here
 
jeffzorz,

itschad

Well-Known Member
@DieHard your tutorial says you ended up with a resistance of 3.8ohm but @215z said you can rebuild to 0.8

would that be due to the 60 gauge vs the 80 gauge? is there a preferred one for safety/longevity?

ive never ventured into rebuildables/ecigs prior to now
 
itschad,
Top Bottom