Discontinued The Persei Vaporizer for herbs and concentrates.

Vapvap

Vapvap

Well-Known Member
Hola Pickmita
You need to buy a Persei (2 batteries comes with), 2 more batteries 18350 (better), and the Bender. You better buy directly to W9, IMO.
The taste is one of the better I've tested.
The air comes from 4 holes but passes through the ceramic heater too.
It's a great choice :tup:
:rockon:
 
Vapvap,
  • Like
Reactions: ataxian
pickmita

pickmita

Well-Known Member
Vapvap said:
Hola Pickmita
You need to buy a Persei (2 batteries comes with), 2 more batteries 18350 (better), and the Bender. You better buy directly to W9, IMO.
The taste is one of the better I've tested.
The air comes from 4 holes but passes through the ceramic heater too.
It's a great choice :tup:
:rockon:
Click to expand...
Thank you!
Can I add the Nibbler on top of the Bender for water filtration or is it just for concentrates? One more question: how can I regulate the temperature of this setup?
 
pickmita,
  • Like
Reactions: ataxian
DieHard

DieHard

Accessory supplier
Accessory Maker
@pickmita You can get creative with the bender using a 18mm male gong and some whip tubing and an adaptor for the other end of the whip to fit your chosen water path.
21EtXYT.jpg
 
Vapvap

Vapvap

Well-Known Member
pickmita said:
Thank you!
Can I add the Nibbler on top of the Bender for water filtration or is it just for concentrates? One more question: how can I regulate the temperature of this setup?
Click to expand...
No for the Nibbler, just for concentrates
The temperature isn't regulate, but you only have to keep pushing the button, and when you feel hotter, you can release. Very easy
 
Vapvap,
DaNi_DuB

DaNi_DuB

Vapor Enthusiast
kaisersosay415 said:
Was that with heavy use
Click to expand...

I used the shit out of the first one, but with this last one I was pretty paranoid (used two tools to get the wax on the coil without touching it) and only used about 1g $50 wax and it still pussed out on me. If it turns out that the herc isn't what I'm looking for, my healthstone might just come out of retirement.
 
DaNi_DuB,
jambandphan03

jambandphan03

in flavor country
Just got my kiss kart and WOW it's so clean tasting compared to the other coils I've tried. Not much to it, did a first load, hit it twice to prime it then topped off. I'm glad it can be easily rebuilt when it dies. I got some kanthal wire, multimeter and waiting on a om cart reader to show up one of these daze from fasttech... still need to figure out how to use the multimeter, but I'm sure a few youtube searches will take care of that. running it with T1/17670 battery + adapters right now, it also fits perfectly on my AR battery (finally I have a use for that thing). I am already pretty blitzed from the first few hits and I wanna keep playing.
:ko: Instant milking of the bubbler... :rockon: I'm going to have to watch my tolerance with this one...
 
Dr. Soxhlet

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
I got my new Persei working! :spliff:
Thanks go out to Sleepin in CA for the 2.4 ohm cart and mouthpiece.
Also thanks for the advice from members and THC Scientific.
I''ll be reading the thread and lurking for awhile til I feel like I have something worthwhile to contribute.
Thanks again!!
 
DieHard

DieHard

Accessory supplier
Accessory Maker
jambandphan03 said:
Just got my kiss kart and WOW it's so clean tasting compared to the other coils I've tried. Not much to it, did a first load, hit it twice to prime it then topped off. I'm glad it can be easily rebuilt when it dies. I got some kanthal wire, multimeter and waiting on a om cart reader to show up one of these daze from fasttech... still need to figure out how to use the multimeter, but I'm sure a few youtube searches will take care of that. running it with T1/17670 battery + adapters right now, it also fits perfectly on my AR battery (finally I have a use for that thing). I am already pretty blitzed from the first few hits and I wanna keep playing.
:ko: Instant milking of the bubbler... :rockon: I'm going to have to watch my tolerance with this one...
Click to expand...
Set the multimeter to ohms (omega symbol). Make sure your black lead is in the COM socket and the red lead is in the V (omega) socket. Touch one lead to the threads and one to the center contact. Digital meter will work best for this. For my meter, if the coil is bad there will be no change when I apply the leads. Or there will be a really high reading. (Higher number, more resistance . Too much resistance= no good contact)
NVz1kD9.jpg

j8SZYvE.jpg

wGC7sRq.jpg
 
DieHard

DieHard

Accessory supplier
Accessory Maker
jambandphan03 said:
Mine has a few more choices in the Om section...

IhLIy21.jpg
Click to expand...
I see, yours is not auto-ranging. So, you would set it at 200 (right above the word COM) because you will not be reading in excess of 200 Ohms. If you want to test batteries, put it on DCV 20 (because you will be testing well under 20volts). Then red to positive black to negative.
 
ataxian

ataxian

PALE BLUE DOT
DieHard said:
I see, yours is not auto-ranging. So, you would set it at 200 (right above the word COM) because you will not be reading in excess of 200 Ohms. If you want to test batteries, put it on DCV 20 (because you will be testing well under 20volts). Then red to positive black to negative.
Click to expand...
I coundn't help but see your reference to ZIG ZAGS!

When I was a teen I took pride in the FAT JOINTS I would roll. No Vaporizers at all that I knew of.

Now I can't smoke a joint if I wanted to!
The VAPORIZER has change my consumption greatly.

The BENDER is not that popular with some people. I love the F'KER.
Flavor is great and effects me like a joint however taste way better!

Wax before bed replaced all sleeping pills. The PERSEI is cool to me because of the automation. O' I almost forgot the effect.

No turning back!
DaNi_DuB said:
This one only lasted about a week. The one before it, two weeks.
Click to expand...
rebuilt them! Then you will have 2!

it's only the wire needs replacing.
@Sleepin in CA knows how!
 
Last edited:
Hedonismbot

Hedonismbot

Well-Known Member
jambandphan03 said:
Mine has a few more choices in the Om section...

IhLIy21.jpg
Click to expand...


DieHard said:
I see, yours is not auto-ranging. So, you would set it at 200 (right above the word COM) because you will not be reading in excess of 200 Ohms. If you want to test batteries, put it on DCV 20 (because you will be testing well under 20volts). Then red to positive black to negative.
Click to expand...

@jambandphan03 Also, when measuring resistance, touch the two probe tips together and see if you can get a 0 reading (0 means no resistance, a short). If there is any residual resistance you need to subtract that amount from your readings.
 
DieHard

DieHard

Accessory supplier
Accessory Maker
ataxian said:
I coundn't help but see your reference to ZIG ZAGS!

When I was a teen I took pride in the FAT JOINTS I would roll. No Vaporizers at all that I knew of.

Now I can't smoke a joint if I wanted to!
The VAPORIZER has change my consumption greatly.

The BENDER is not that popular with some people. I love the F'KER.
Flavor is great and effects me like a joint however taste way better!

Wax before bed replaced all sleeping pills. The PERSEI is cool to me because of the automation. O' I almost forgot the effect.

No turning back!
Click to expand...
Yeah there's no turning back that's for sure. But I still roll one every so often.
Now that I sit back and reflect, my first "vape" experiment was a ball of hash dropped on a hot car cigarette lighter coil back in the early '80s. LOL:lmao:​
 
ataxian

ataxian

PALE BLUE DOT
DieHard said:
Yeah there's no turning back that's for sure. But I still roll one every so often.
Now that I sit back and reflect, my first "vape" experiment was a ball of hash dropped on a hot car cigarette lighter coil back in the early '80s. LOL:lmao:​
Click to expand...
In the 70's we had some good flower colas. Being on the WEST COAST we had a quick plane ride to HAWAII. We use to put drops of honey oil on tin foil!
We got it from India!
 
Last edited:
K

kaisersosay415

Well-Known Member
So quick question. When cleaning the to kiss. I can submerge the whole cart in ISO. Won't this mess it up. Any tips on cleaning would be appreciated.
 
kaisersosay415,
DaNi_DuB

DaNi_DuB

Vapor Enthusiast
You must log in or register to reply here.
Top Bottom