Discontinued The Persei Vaporizer for herbs and concentrates.

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
It was working fine for my first 2 bowls. Then after being overly-bent, I was like I wonder what those O-rings are for. I put it where the pic shows, asked the question, then instantly saw it inside the metal piece. So i then screwed the hammer back on. Once again being overly-bent I wanted to see how orange the hammer got. Thats when I saw it would not light up. Posted again, cleaned and now its working.

ALL IN ALL TOO BENT. user error


Cool let me know if the hammer acts up.
 
THC SCIENTIFIC,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
guys lets get feedback on the taste, how long charge lasts, and the quality of the vapor.
 
THC SCIENTIFIC,

tharealmclovin

Well-Known Member
I used an almost fully charged set and it lasted for 2 bowls. more if needed.

The vapor is thin and tasty, but can get hot if the button is held too long. Thin in a good way. you get more than you think without choking.
 
tharealmclovin,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I used an almost fully charged set and it lasted for 2 bowls. more if needed.

The vapor is thin and tasty, but can get hot if the button is held too long. Thin in a good way. you get more than you think without choking.

You should get 3 full bowls done on fully charged batteries. Also if you want thicker vapor hit is softer and regulate with the button. In about a week of use you should be able to make massive clouds, takes a while to get use to it.
 

jambandphan03

in flavor country
Well, I have to say, this thing is freaking working!! :ko:
It's a manual driver for sure, you control the heat and air flow to get the desired hit. Not so much on the conservative size as far as load goes. Maybe it's my material, already been ground and pretty dry. I am getting pretty even ABV. The taste is amazing, so clean. I was getting way to much pull through so I took one of my 14/18 male/male adapters and stuck a screen inside, and now use that for the mouthpiece for now.



gtcVL.jpg
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
im loving the feed back guys, please give me more as im working on getting a solution for this and need all of the info as possible.

Bob can you check voltage on battery after 2 bowls?

Jam nice home made fix for it. Please hold on as we are trying to get a fix for this.

TRML ok cool i just wanted to make sure you are capable of thick clouds and not a issue with the unit.
 

tharealmclovin

Well-Known Member
Waiting on both sets of batteries to fully charge. I will then get my labcoat and clipboard ready...and maybe a pizza and pillow.
 
tharealmclovin,

jambandphan03

in flavor country
i'll pull the glass unit up a little to back the wand out of the hole a little

I found this technique also works well for a smaller load, I slide the glass up so the tip of the hammer is lower in the herb chamber, closer to the herb, this way I don't have to fill the chamber to get it to vape with out getting it too hot. It's nice being able to see what is going on inside.
 

kindbeats

Terps Up, Temps Down
not at this point boss, we sold out on the first 100 within a week.

D'oh! I don't even have a Persei yet, but I wanted to strike on the Bender deal while the iron was hot. Oh well. I'm glad to hear it's kicking ass! I actually haven't been enjoying flowers for a year now, but am really psyched to try them again using the Bender. Hope to grab one of them and a Persei soon!
 
kindbeats,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I am happy for all the Persei owners, especially now that they have the Bender.

All of us Omicron owners will sit patiently in the corner waiting for some scraps and leftovers to be thrown our way.

please dont say it like that, I am trying my hardest to get a herb chamber for the Omicron and we have succeeded with the Hercules 3.7v version. Please be patient and it will come.
 
Agent S.S. Sands said:
I am happy for all the Persei owners, especially now that they have the Bender.

All of us Omicron owners will sit patiently in the corner waiting for some scraps and leftovers to be thrown our way.
please dont say it like that, I am trying my hardest to get a herb chamber for the Omicron and we have succeeded with the Hercules 3.7v version. Please be patient and it will come.
I meant it in a "half-facetious", "half-sarcastic" way which doesn't come across in text.

I would just like to see the same R&D enthusiasm aimed at the Omi v2.5 and HVD for a change.

Welcome back btw, I hope you had a great time down under.
 
Agent S.S. Sands,
  • Like
Reactions: kindbeats

tharealmclovin

Well-Known Member
G, THe problem is back with my 1200 hammer. When screwed in all the way it wont light up, but if i loosen it slightly it will light up. But this time some minor smoke came out of the persei top and now I smell burnt electronics

Again. light wont go on. then I loosen it, light stays on until i take out batteries. smoke comes out of the button.

Using my hammer top now and its working. I may have shorted my original top.
 
tharealmclovin,

Bob Loblaw

Astralnaut
im loving the feed back guys, please give me more as im working on getting a solution for this and need all of the info as possible.

Bob can you check voltage on battery after 2 bowls?

haven't had a problem drawing stuff unless the mouthpiece slips. i can't check the voltage as i don't have a meter, unfortunately (you'd think i'd have gotten one by now). however i prolly wouldn't try to run three bowl on a single charge anyway. i like my batts too much. only charge on 300 mah. not a stress. need a few extra batts anyway.

EDiT - btw the stir tool is excellent

gonna try throwing some kief at this thing
 
Bob Loblaw,
  • Like
Reactions: OF

kindbeats

Terps Up, Temps Down
I meant it in a "half-facetious", "half-sarcastic" way which doesn't come across in text.

I would just like to see the same R&D enthusiasm aimed at the Omi v2.5 and HVD for a change.

My sentiments, exactly. I know G and THC Sci are more than capable of pulling off some awesome gear, but it just seems like everything that has been coming out has been geared for the Persei.
 
kindbeats,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
G, THe problem is back with my 1200 hammer. When screwed in all the way it wont light up, but if i loosen it slightly it will light up. But this time some minor smoke came out of the persei top and now I smell burnt electronics

Again. light wont go on. then I loosen it, light stays on until i take out batteries. smoke comes out of the button.

Using my hammer top now and its working. I may have shorted my original top.


Please ship the top so I can look at it.
 
Top Bottom