Discontinued The Persei Vaporizer for herbs and concentrates.

[masaki]

I just saw quartz dual coils for the ac. I'm not sure what to expect, but I'm grabbing a 5 pack to try. Also a little skeptical, but I've been wrong before.

http://www.oilvaporizer.com/alpha-quartz-dual-ti-gr2-coil-5pack-p/alpha-quartz-dual-ti-2-5-pack.htm

I'm interested hear how they work.

 

[Fredster951]

Temp control is still up for debate I guess? I can't say for sure that it works with the Ti wire but from my experience it does. The Kiss AC is a beast on a temp mod. It will produce flavorful huge clouds. Before I used the kiss AC on the 8. After buying a Tc mod my 8 is a paperweight. If you don't like TC you can always go to power watts mode and adjust to your liking. Cant wait for the kiss AC water tool.

My Persei is the only battery from w9 still being used. Actually it is a hammer top with Persei chrome tube. Still use it with my Hercules SR.

 

[Fredster951]

The Herc runs like a champ on the Sigelei 150W temp control! Still struggling with temp control on the Ni Kiss Globes though. Will report back later if I have better success.

Badass! What setting you using for the Herc? I have the same set up.

 

[THC SCIENTIFIC]

heads up the invader mini temp control does not work great,

in fact using Dual coils set temp at 420 at 4.2watts it gets to round 500-530F great for oil but a little slow on the build up which i like.

remember this is empty cart and a lot of fiddling needs to be done for this. Each situation would be different and since ti changes resistance as it gets hotter as it fluctuates.

 

[Big Baby Jesus]

glad i can help your vaporizer has been used with multiple carts now and it is still going strong.

on a side note i have tasked my engineer to fix the issue with the kiss AC and Persei top even if its less then .5 % of whats out there. That is unacceptable to us and the last ( once again generation of persei tops ) is under full development again.

With our capabilities now growing are able to design better boards and the next generation should once and for all fix all issues with current cartridges.

Including Kiss AC.

New tops in development will have a .5 ohm capability with a low voltage kicking in at 2.7v when using a 3.7v battery.

When using a 7.4v battery it will have a .5 ohm capability only with Kiss AC carts and low voltage kicking in a 5.7v

Pass through none operation range will be around 5.0v-5.4v

These numbers are not 100% but will be once we finalize the board.

But here is the kicker.


Anyone who has paid for a touch button top upgrade and has a kiss AC will get the new tops for free, as long as shipping is paid. You just have to return the old top.

this upgrade is for the black and silver units only, if you have a different color unit then your unit will be upgraded to black or silver including tube and top for $10 and at the same time for the off color ones you will also get a free Kiss Gen 3 cart.

Good for you Gary. Warms my heart you decided to try and make things right for long time customers. I'm not mad at you anymore.

@THC SCIENTIFIC
V2 iris?

But I still went with a Vamo V10 because it's like the mythical Iris V2. Feel silly for paying $165 for my Persei from vapewarehouse or whatever. Tube, batteries, button, $165? I like the cartridges I've bought from you though.

In case you're wondering what I would buy in a vape if you made it? Basically the Persei, with V2 Iris top, and the ability to plug in base with a USB cord and hit it while charging--if the price was reasonable. In the meantime, others make better cartomizers for less.

 

[THC SCIENTIFIC]

Good for you Gary. Warms my heart you decided to try and make things right for long time customers. I'm not mad at you anymore.



But I still went with a Vamo V10 because it's like the mythical Iris V2. Feel silly for paying $165 for my Persei from vapewarehouse or whatever. Tube, batteries, button, $165? I like the cartridges I've bought from you though.

In case you're wondering what I would buy in a vape if you made it? Basically the Persei, with V2 Iris top, and the ability to plug in base with a USB cord and hit it while charging--if the price was reasonable. In the meantime, others make better cartomizers for less.

We are working on it but times are tough and with the economy on the down swing and more pretenders on the market its taking sales away from us, which means funds away from R&D.

 

[itschad]

Got my new button assembly. My original assembly is definitely jacked up. I'd have to squeeze it super hard and in a specific spot to get a decent connection. This one I can pretty much just tap softly and get better function than previously

woohoo!

 

[beefybudds]

Got my new button assembly. My original assembly is definitely jacked up. I'd have to squeeze it super hard and in a specific spot to get a decent connection. This one I can pretty much just tap softly and get better function than previously

woohoo!

How much did you have to pay?
I'm in need of a new one also.
Thanks

 

[itschad]

How much did you have to pay?
I'm in need of a new one also.
Thanks

$10

 

[CrazyJustin]

We are working on it but times are tough and with the economy on the down swing and more pretenders on the market its taking sales away from us, which means funds away from R&D.

I'd put in for crowdsource funding.

 

[Quint]

I'd put in for crowdsource funding.

I'm in as well.

 

[StormyPinkness]

for anyone who's interested and doesn't already know, there's lots of information on temperature control and how it works with uptech atomizers here:
http://fuckcombustion.com/threads/a...l-wax-how-to-one-hitter-quitter.10360/page-82

Man, that thread is scary if you aren't into rebuilding.

 

[mixchu69]

For THC SCIENTIFIC,
I'm thinking about purchasing another Hercules. Is there something in the near feature (next 6 months) that will be better than the Hercules? Don't want to purchase if you got some great new cart coming out soon.

 

[THC SCIENTIFIC]

For THC SCIENTIFIC,
I'm thinking about purchasing another Hercules. Is there something in the near feature (next 6 months) that will be better than the Hercules? Don't want to purchase if you got some great new cart coming out soon.

Your ok, nothing in development to kill the Hercules. Although we are working on things that will use the Hercules so no promise yet on these as they are in development.

 

[itschad]

Anyone know the nibbler o-ring sizes off hand? i forgot to grab mien to take to the hardware store

 

[tharealmclovin]

So what's the consensus on best variable voltage mod to get until the iris v2 arrives? I saw a few posted, but not sure which is best. Will be using an AC cart

 

[SamuraiSam]

Anyone know the nibbler o-ring sizes off hand? i forgot to grab mien to take to the hardware store

The Nibbler XL comes with 3 each 905 and 906 O-rings, so you have thin and thick options to account for variance in fitment.

 

[CrazyJustin]

So what's the consensus on best variable voltage mod to get until the iris v2 arrives? I saw a few posted, but not sure which is best. Will be using an AC cart

I'm using an iStick 100w, with my AC and Okeanos.

 

[THC SCIENTIFIC]

im just gonna leave this here.

What is on the horizon.

 

[StormyPinkness]

That looks amazing and actually pretty damn stealthy for the herc. Can't wait to see some more of this.

 

[FlyingLow]

Only interested if it is tinker-free.

I know a lot of fans prefer to be able to tune and dial everything in, but I wrench on enough around my shop...

 

[CrazyJustin]

Only interested if it is tinker-free.

I know a lot of fans prefer to be able to tune and dial everything in, but I wrench on enough around my shop...

I hope so. Looks like a box mod, but for a Herc.

 

[THC SCIENTIFIC]

That looks amazing and actually pretty damn stealthy for the herc. Can't wait to see some more of this.

Yes it is

Only interested if it is tinker-free.

I know a lot of fans prefer to be able to tune and dial everything in, but I wrench on enough around my shop...

Not sure what you mean by tinker free, you still have to adjust settings for each cartridge.

I hope so. Looks like a box mod, but for a Herc.

Not only for the Herc.

 

[Fredster951]

im just gonna leave this here.

What is on the horizon.

Now that's what I am talking about!!!! W9 pro quality. When can we expect this? I pay the price for this when out!

Stacked 18350 on this box it seems? Will there be a 18650 dual battery option?

 

[StickyShisha2]

oh how i love getting an e-mail titled Resolved Ticket.

i guess that is the only response i'm getting