The Mighty/Mighty+ by Storz & Bickel

A

axilla101

Member
Question: anyone have any experience with the Mighty/Crafty replacement screens from Vgoodies vs. the S+B brand ones?

I have to use the fine screens in general because of how fine I like my grind-- if I use the coarse one, it lets material right through.

vgoodiez.com

Replacement Screens for Crafty / Mighty and V3 Injectors by VGoodiEZ

Replacement Screens for Crafty/Mighty Cooling Units. Please check size/style/quantity options. Also works for our V3 14MM Injector (screened version) in clear and smoked glass!
vgoodiez.com vgoodiez.com

I'm wondering if the weave on the titanium ones is as fine as the stainless steel-- and if they work both work as well as the fine S+B ones? I prefer titanium, but am particularly paranoid about bits falling through-- I'd rather go with the SS if it's tighter and better at blocking tiny tiny particles.

Thanks so much! (posting this to the other S+B portable boards as well, since it's the same screens for all).


STAINLESS STEEL
https://imgur.com/a/ocD5xjp
https://imgur.com/a/xSj3CdT


TITANIUM
https://imgur.com/a/FP5GhoK
https://imgur.com/a/mfCq35U
 
Last edited:
axilla101,
A

aniceto

Well-Known Member
I read somewhere the Mighty + can reach 220 C with the superbooster instead of the 210 C the OG can reach. Is that correct?
 
aniceto,
D

DevRev

Well-Known Member
I've looked around so apologies if this has been covered:

I've had two Mightys now and will likely get a Mighty+ next, they are my fav vape outside of my home log one. Anyway, I try to keep the bowl clean between sessions but always get build-up eventually. I have a scoop dog metal tool to scrape the bowl clean when needed (bad idea I guess for the future, but what's done is done.) There is a lip between the top of the chamber and the bowl, when you have a new mighty it's very tight but over time I get a separation and material goes into this lip. I try and scrape it out but it seems like it makes the gap get wider over time and more and more stuff gets in there. Is there a better way to clean this? I watched the heating chamber tear down vid but it didn't cover this section as far as I could see.

Thanks for any suggestions!
 
DevRev,
SageTheHerb

SageTheHerb

I love my Mighty+ :)
axilla101 said:
Question: anyone have any experience with the Mighty/Crafty replacement screens from Vgoodies vs. the S+B brand ones?

I have to use the fine screens in general because of how fine I like my grind-- if I use the coarse one, it lets material right through.

vgoodiez.com

Replacement Screens for Crafty / Mighty and V3 Injectors by VGoodiEZ

Replacement Screens for Crafty/Mighty Cooling Units. Please check size/style/quantity options. Also works for our V3 14MM Injector (screened version) in clear and smoked glass!
vgoodiez.com vgoodiez.com

I'm wondering if the weave on the titanium ones is as fine as the stainless steel-- and if they work both work as well as the fine S+B ones? I prefer titanium, but am particularly paranoid about bits falling through-- I'd rather go with the SS if it's tighter and better at blocking tiny tiny particles.

Thanks so much! (posting this to the other S+B portable boards as well, since it's the same screens for all).


STAINLESS STEEL
https://imgur.com/a/ocD5xjp
https://imgur.com/a/xSj3CdT


TITANIUM
https://imgur.com/a/FP5GhoK
https://imgur.com/a/mfCq35U
Click to expand...
I bought a bunch of mine off of Amazon a few years ago for not too much ($13 or so?) for like 100. They fit my Mighty+ and Mighty+ accessories perfectly. It's all about just matching the diameter. If you DM me I might? be able to send you the link but I would have to find it, haha.
 
SageTheHerb,
cheeseholidays

cheeseholidays

Well-Known Member
Does anyone else find that the ceramic is actually harder to clean?

I find that I usually have to scrap the tough stains off with a wooden poker.
 
cheeseholidays,
hweezi

hweezi

formally cwheezy
Has anyone had their super charger just stop working ?

I went to plug it in today and no dice. No green light, she dead. Tried googling it and doesn't seem like anyone else has had this issue.
 
hweezi,
C

Cdwhit

Active Member
hweezi said:
Has anyone had their super charger just stop working ?

I went to plug it in today and no dice. No green light, she dead. Tried googling it and doesn't seem like anyone else has had this issue.
Click to expand...
Yeah, their super charger is a POS, Mine lasted a couple months. I got a replacement at walmart cheaper, but even though it claims high power, it takes longer than the SB. I was going to try Amazon. It’s expensive, but I’ve had good luck with the Apple chargers, and some of their devices are rapid charge USB-c.
 
Cdwhit,
D

DevRev

Well-Known Member
I haven't tried the new chargers, but I burned out a few of the old chargers. I thought I had read you can vape while charging, but this seems to burn out my power supplies. Once I stopped doing that I haven't had an issue in the last six months or so. I'm using an external HD power supply and it seems to be working fine for reference.
 
DevRev,
C

Cdwhit

Active Member
DevRev said:
I haven't tried the new chargers, but I burned out a few of the old chargers. I thought I had read you can vape while charging, but this seems to burn out my power supplies. Once I stopped doing that I haven't had an issue in the last six months or so. I'm using an external HD power supply and it seems to be working fine for reference.
Click to expand...
That could well be the issue. I was vaping while charging, though my WallyWorld replacement has handled it so far. But I think in my case it’s the USB-C plug on the charger cable. Unfortunately, at least on my charger from SnB, the cord isn’t replaceable without soldering. It was a lot easier to buy a new one.
 
Cdwhit,
M

mk9

New Member
Hi,
I've been searching but can't find a definitive answer, (if there is one?) to what size/type of screws are used to open up the Mighty. I just don't know which type of screwdrivers to order, as I don't want to mash up the screws!
Also, whilst I'm changing the batteries, I might as well try cleaning out the airflow, any advice or links to help with this available?
Mine's a 2020 model Mighty.
Huge thanks
 
vapviking

vapviking

Old & In the Way
mk9 said:
Hi,
I've been searching but can't find a definitive answer, (if there is one?) to what size/type of screws are used to open up the Mighty. I just don't know which type of screwdrivers to order, as I don't want to mash up the screws!
Also, whilst I'm changing the batteries, I might as well try cleaning out the airflow, any advice or links to help with this available?
Mine's a 2020 model Mighty.
Huge thanks
Click to expand...
Mine was not a definitive answer, but you might get some help from my teardown post from a few years ago...
(don't mind what this link says, it will in fact take you to my post)

The Mighty/Mighty+ by Storz & Bickel

Can anyone direct me to a tutorial on posting pictures (removing meta-data, etc. and the posting procedures for newFC)? I anticipate popping the hood on Mighty very soon, since the new batteries from @JCat have finally hit my home post office! Yesterday I cut open the screw holes and found a...
fuckcombustion.com
 
J

jj71787

Well-Known Member
Does anyone know the size of the mouth piece o ring. They sell bulk on Amazon but not sure of the correct size.
 
jj71787,
Jill NYC

Jill NYC

Portable Hoarder
jj71787 said:
Does anyone know the size of the mouth piece o ring. They sell bulk on Amazon but not sure of the correct size.
Click to expand...
I have a cheap caliper, and over-50-year-old eyes, so take my measurements with a (true) grain of salt!
(I did measure several times, but o-rings might come in slightly different sizes)

This is for the smallest size o-ring, which I am assuming is mp ring:
Outer Diameter: 8.4mm
Inner Diameter: 5.6mm
Width: 1.4mm
 
F

flurbius

New Member
I just received my brand new Mighty+, read the instructions and got it going first try!
My first question is:

Why is it designed to not be able to stand up? The bottom is rounded but has two protrusions on it that extend further at the front than they do at the back. Somebody chose for this thing to fall over if anyone tries to prop it up on its end. Why?
[edit]I figured it out, if you flip the tool that fits in he bottom, around, it sticks out and makes a great stand.
 
flurbius,
vapviking

vapviking

Old & In the Way
flurbius said:
I just received my brand new Mighty+, read the instructions and got it going first try!
My first question is:

Why is it designed to not be able to stand up? The bottom is rounded but has two protrusions on it that extend further at the front than they do at the back. Somebody chose for this thing to fall over if anyone tries to prop it up on its end. Why?
Click to expand...
Age old question.
I guess with the plus they added the two little feet.
If you reverse the poker tool, it adds a little more stability, but not much.
A small inexpensive stand is the way to go.
 
vapviking,
  • Like
Reactions: Rodney
C

Cdwhit

Active Member
It’s weird. Of all the features I have wished the Mighty+ had, I have never worried about it standing up. If it stood up, either the dog or myself would knock it over. It’s better all around if I lay it down to start with. I wish I could lay my damn bong on its side. Well, I do lay it on it’s side regularly, but it’s never intentional and always leaves a mess.
 
bluepom

bluepom

Member
Cdwhit said:
It’s weird. Of all the features I have wished the Mighty+ had, I have never worried about it standing up. If it stood up, either the dog or myself would knock it over. It’s better all around if I lay it down to start with. I wish I could lay my damn bong on its side. Well, I do lay it on it’s side regularly, but it’s never intentional and always leaves a mess.
Click to expand...
Have you tried vaping through the bong dry? Game changer for me and my carpets.
 
You must log in or register to reply here.
Top Bottom