The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
analytika
Well-Known Member
vapviking
Old & In the Way
If I'm not mistaken, this is the same piece marketed elsewhere as the Easy Flow.The one from PuffItUp
I don't think they've ever worked out the problem with the potential to over-torque putting tension on Mighty/Crafty housing.
This adapter also leaves considerable space between the top of chamber and the adapter's screen and a lot of folk's report they have to fill the gap, like with an oil pad or extra screen in order to hold material in place.
EDIT; I notice that PIU is also selling an "H2O mouthpiece" that's an in-line bubbler fitted to Mighty/Crafty with what appears to be the same plastic mount that the Easy Flow employs. While I love the concept (I sometimes use a hydratube with muzzmod as adapter) I think there should be red flags about this attaching to top of this breakage-prone part of the vape. This is only my opinion, I've not actually tried the Easy Flow or this H2O thingy. They may work fine, but fair warning is in order about being very cautious.
Will you please let us know how you like it?
Last edited:
Buds of War
#fueledbyTHC
my mighty arrived today, i think we know the rest 
tdriver
Well-Known Member
Vaporcussion
Well-Known Member
I will once I obtain some glass! (My roommate promised to buy the glass if I bought the V3, but he used it for combusting, so now I don't want to use it!
10+ years vaping, and I've still never vaped through glass. Excited to try it...
ktmstick
Well-Known Member
Just clean it with iso and salt. Comes out like new.
Vaporcussion
Well-Known Member
Yes!
simplywonderful
Well-Known Member
we need to request it, aluminum would not be good because of heat but for example ceramic zirconia... or even just dumb bumper sleeve and reinforcement of the cu area would help
hey everyone I just want to ask did anybody from eu got mighty rma done and got replacement? how long it did take to turn around nowadays? thank you
Last edited by a moderator:
Whissmu
Well-Known Member
I had the pleasure::
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-456#post-1193233
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-456#post-1194748
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-465#post-1202894
Last edited:
BigJr48
Well-Known Member
any idea for a mighty stand, diy or dhgate
ddavemods.com or PIU I think are your best options, but that's just my honest opinion.
BigJr48
Well-Known Member
simplywonderful
Well-Known Member
me too quick deep vacuum cleaner suction
but by normally pulling not
simplywonderful
Well-Known Member
Maybe you got a lemon, was your box whitish color or blue + orange? contact your retailer. Its the best move, maybe you wont even need to send it
I checked out this new M and oh my it is beautiful. Correct me If Im wrong but it seems to me that, haptic feedback/vibration is located more towards the upper parts of the unit and it is much more subtle vibration. The whole part around the chamber was improved to stainless steel from aluminum which was used before(now it looks like a fuckin mirror shining in its all majesty.
I wonder if somebody would make portable vape with same heating element as that one used in herbalizer
ceramic zirconia body or wooden one would be even better
simplywonderful
Well-Known Member
Hope you enjoy it !
) What a beatiful panther do you enjoy the glass mouthpiece over the regular one? I lost the little silicone piece and cant find the replacementIm also wondering why people are using water adaptors, I use simple dhgate chinese arizer extreme q 18mm whip adaptor which is sturdy as f/ I dont know about the original arizer ones, so this adaptor, fitted to a waterpiece + little piece of some health/food grade silicone tubing.
You can see the vapor traveling from cu to mighty, mighty had fallen of to ground many times but mainly because of my fault. Im now wondering how much working days approx took shipping, last time I sended mighty for rma it was smooth until it was taken by ups.
ups was transporting for 17 working days, I believe it will go smoother this time and that I would get it sooner.
btw this is your first rma?
vapviking
Old & In the Way
Because they can completely eliminate the cooling unit from the process. It's not needed because water cools and conditions (adds moisture) to the vaper. Why lose goodies to become condensate in the c/u when you don't have to?
That said, I sometimes do it in a way quite similar to the way you're describing...
just_the_flu
they say im crazy but i have a good time
any idea for a mighty stand, diy or dhgate
...I've only heard @WakeAndVape mention this... Turn your stir stick at bottom other way and mighty stands up fine
Whissmu
Well-Known Member
Hope you enjoy it !
Im also wondering why people are using water adaptors, I use simple dhgate chinese arizer extreme q 18mm whip adaptor which is sturdy as f/ I dont know about the original arizer ones, so this adaptor, fitted to a waterpiece + little piece of some health/food grade silicone tubing.
You can see the vapor traveling from cu to mighty, mighty had fallen of to ground many times but mainly because of my fault. Im now wondering how much working days approx took shipping, last time I sended mighty for rma it was smooth until it was taken by ups.
ups was transporting for 17 working days, I believe it will go smoother this time and that I would get it sooner.
btw this is your first rma?
Thank you for your kind words!
I enjoy my mighty when I have to travel 
(I have it as a revolver with my most powerful flower bullets)yes ... it was my first RMA
I love the glass mouthpiece
,improvement for my labial sensation, the visual touch and I would like to think that the taste also ...I feel the loss of the silicone ring ... could you buy a silicone tube from that diamertro and make the right rings?
simplywonderful
Well-Known Member
Its tricky I absolutely understand where you are coming from, but still there would be some loss due to the water filtration, maybe using piece without water? Some people like vapecritic seems to like it that way. The main reason why I did not wanted that adaptor was that SB do not recommend to get the device upside down, I remember reading somewhere that they denied the rma because it was gunked up from that vapor which traveled upwards.
The CU is a catch I admit, but you can always scrape it and save that good good for a rainy day
Thank you for your kind words!
yes ... it was my first RMA
I love the glass mouthpiece
I feel the loss of the silicone ring ... could you buy a silicone tube from that diamertro and make the right rings?
I bet you carry them bullets in that filling aid/revolver magazine , Those bullets are sometimes straight homicide on the sunny day 
Im not sure what the diameter on that silicone ring is, but its kind of unique, I remember that its like thicker on the one ending so it will stay in the place. Have you ever had a problem with that glass mouthpiece falling off when simply carrying it ? I must say there is something with the taste, I always have mouthwatering all over when using that mouthpiece
I dont know if its just me, but somehow I find vapes from all glass parts kind of dry vapor producers, I mean by that that it somehow lacks the moisture. But maybe its just me.
Whissmu
Well-Known Member
Im not sure what the diameter on that silicone ring is, but its kind of unique, I remember that its like thicker on the one ending so it will stay in the place. Have you ever had a problem with that glass mouthpiece falling off when simply carrying it ? I must say there is something with the taste, I always have mouthwatering all over when using that mouthpiece
I dont know if its just me, but somehow I find vapes from all glass parts kind of dry vapor producers, I mean by that that it somehow lacks the moisture. But maybe its just me.
With the glass nozzle I just have to be careful when turning it for use ... I have to press it down and pay attention that it does not come out ... it holds up well , it does not come out unless you move it. It also helps to know when it is time to clean the CU, i do not notice moisture loss
I was using my V3 mod through my ash catcher + J-hook combo this evening and it's surprising how hot the Mighty got the glass even at 365*F. As I was using it I could feel the glass warming up in my hand. Vapcaps can heat up glass slightly with back to back heats but the Mighty pumps out much hotter vapour evidently.