If it did enough to cover a full day I might have got excited, only 40 at once
Looks like a lot of trouble, let us know how you go with it.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
If it did enough to cover a full day I might have got excited, only 40 at once
Looks like a lot of trouble, let us know how you go with it.
Razshiro
Well-Known Member
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-457#post-1196227
Yeah let us know if it's worth , we don't have many report ...
subway13029
Well-Known Member
Do we have any reports?
Razshiro
Well-Known Member
hmmm i've found 3 reports^^: @Jack_72 , @Slagzord
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-460#post-1199180
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-462#post-1200706
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-462#post-1201637
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-463#post-1202041
So yes we need your report !!!
Mhhh... I could take some pictures next time and emphatize the good and bad parts of this item. It still requires some "manual" after filling if you want to put more than .15 inside of your capsule. Plus it is a little bit messy. I do not always use the filling tool, its no fun to use it. Still I have to admit how useful it can be, I usually pre fill about 60 capsules which will lasts for a month or sohmmm i've found 3 reprts^^: @Jack_72 , @Slagzord
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-460#post-1199180
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-462#post-1200706
So yes we need your report !!!
.
Bomb33
Well-Known Member
I like your honesty. I hate filling them to but gaping them is so nice and mighty. Problem for me is i got so many strains and so many techniques to fill these things it is almost requires it to be done by hand. Like the innovation and idea behind it. Still think my idea of pre filled at a dispensary would be a hit. Can' wait till it' legalized here lmao.
vapviking
Old & In the Way
you haven't used it yet? I don't know how you stand the suspense!
Charge it up, leave c/u on, don't have to put anything in it. Turn it on and set to high, let it get to temp and go to auto shutoff. Remove c/u, let it cool. Five minutes for all of the above. If you want to be super thorough, repeat the steps once. There will be very faint factory traces of smell, and maybe even faint taste in your first bowl or two that will go away quickly.
So, you only need to be concerned if it smells bad from the burnoff or taste is bad, but chances are extremeley good that all will be fine.
For the adapter, to be careful you could drop into some iso alcohol (preferably the 99%, or if 91% use a little dish detergent afterwards and water rinse.You'll want the iso around for future Mighty cleaning.)
With Mighty I tend to call the burnoff optional, since they are a very thorough, tech minded GERMAN factory.
Now, get on with it!
Last edited:
Had some time off.. Been coughing up phlegm. See my other posts.
Not got any iso. Il buy some.
How do I clean the honey bong out prior to use?
Also need advice on what water to put in the bong. Is evian bottled water ok?
I was not able to wait ...
Put some greens on and turn this thing on.
Then you will be experimenting with the various variants
vapviking
Old & In the Way
You sure are full of ????'s!
You asked about water just recently. FWIW, I use a filter on my drinking water, and same in my glass.
The distilled water is a nice suggestion, as it has removed minerals and chlorine, etc. But if you're good with drinking your tap water, you may be just as comfortable with that in yer water piece. It's all about levels, as Cosmo Kramer once said. "It's levels, Jerry!"
Clean the glass with dish soap initially, or the iso alcohol and then dish soap. It's just glass...so do as you would with a new drinking glass, except a dishwasher might not really get inside yer bong too good.
I tried to buy distilled water but couldn't get any thats why im checking here again to see if bottled water is ok, im a total newb to this
Ok guys burn out done twice for 2 mins each time. Not done the burn out with ABV though
I just tried the stand on the mighty and its a very tight fit was just wondering if you guys prefer the mighty with the stand or without the stand. At the moment I think it looks more aesthetically pleasing without the stand so took it off for now.
Last edited by a moderator:
Do you mean the digger tool on the bottom? I hardly use the little thing and highly recommend never using it as a stand. The Mighty is unstable when you stand it on the tool and will fall over very easily.
@Ratchett makes an awesome 3d printed stand and other accessories for the Mighty that I use. The stand makes loading so much less of a hassle, I've dumped a full load of herb quite a few times when I didn't have it.
Last edited:
Baron23
Well-Known Member
Where in the world are you located, Dave?
ooops, just caught this so you are in the UK somewhere?
UK guys....I know its often more difficult and expensive to get Everclear type ethyl and ISO in some countries than here where I am in the USA, but isn't distilled water rather ubiquitous. Is it really hard to get in the UK?
Its not hard to get but Ive not been to the major supermarkets and if mineral water was ok I was going to use that as im being lazy and can't be bothered to drive to the bigger stores!
Need opinions on dosing capsules!
I have some here but they are rather small, think il just put the herbs in the bowl for now but just noticed the mesh on the bottom of the chamber, is this mesh replaceable?
Last edited by a moderator:
Bomb33
Well-Known Member
If you have a dehumidifier then the water you get from that is also distilled water if I already haven't had too many capsules today. Like vapviking said if you are drinking the stuff then really. Just empty it more often. I got reverse osmosis here lol. But really come on.a little to extreme I think. It' just minerals. Let' talk more about what we put in our mighty to vape. I find the variants to be endless and when you find your spot that' what you stick with. But when someone explains their method it helps you discover more shite out about this amazing tool that has reshaped my life. Lol.
Ya it' replaceable.. But if you are OCD like me then use the caps. A little of the good stuff goes along way. If you pack in the bowl itself it will eventually get dirty and the brown ring will appear lol. I remember when I had my first one it sucked getting it and never getting it off. So for me on my second mighty it's strictly caps only lol. Trust me you pack that mighty full and you will be rocked
. If that' what you want then give her. But a light session is a capsule lightly packed and topped off with an old cu screen.
Ya it' replaceable.. But if you are OCD like me then use the caps. A little of the good stuff goes along way. If you pack in the bowl itself it will eventually get dirty and the brown ring will appear lol. I remember when I had my first one it sucked getting it and never getting it off. So for me on my second mighty it's strictly caps only lol. Trust me you pack that mighty full and you will be rocked
. If that' what you want then give her. But a light session is a capsule lightly packed and topped off with an old cu screen.
Last edited by a moderator:
Bomb33
Well-Known Member
If using caps or bowl itself make sure it' held down either packed fairly tight but not enough that you ain' got air flowing or sit an old screen or even the lid to a cap upside down on top if using the bowl. Even if disappointed you will wipe yourself off and ģet back up cause they don' call it a mighty for nothing
Baron23
Well-Known Member
Mr. Me2
Well-Known Member
The disappointment comes from not using your new toy!
tonuzzi
Spoon Dogg
Well said @Bomb 33, I had the same thing happen with my first mighty, I would load my herb directly in the heating chamber (bowl) and vape away. My heating chamber would get dirty quite frequently and the browning would not go away. With my new Mighty I strictly use the caps, my chamber remains always clean. I cut out two screens for the caps, one in the bottom of it and one inside the top lid so that it minimizes any AVB in the heating chamber.
Enjoy the Mighty, she packs a nice punch!
vapviking
Old & In the Way
@dave123 and @Bomb33,
Guys, we're not supposed to post back to back posts if we can help it; our over-worked mods just go around fixing them!
If you're still within the time limit (several hours or even more, maybe 6 hrs?), you can use the 'Edit' option at the bottom of your previous post, and just add your further thoughts, etc., to that post. Then hit 'Save Changes'.
Guys, we're not supposed to post back to back posts if we can help it; our over-worked mods just go around fixing them!
If you're still within the time limit (several hours or even more, maybe 6 hrs?), you can use the 'Edit' option at the bottom of your previous post, and just add your further thoughts, etc., to that post. Then hit 'Save Changes'.
When Dave turns on the machine
, a light will come on over his head and everything will be clearer.