Homefoodhealth
Member
Last edited:
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
BigJr48
Well-Known Member
Nice case!!!
verdampersweats
Well-Known Member
I used mine for 2 week as a plug in i am only now after that blip changing my habit but the website states it can vape on a dead battery.
Anyways im 10m in still 5 bars at 210c im going to stopwatch it and note the time i get from 1 charge note that down and redo that test next year. If its degrading ill pop it in the post because S&B said there they will honor the past promise for a battery change at 60 euro. I loojed the website T&C it states anything they say in writing must be upheld and it still says you can get a repair done outside of warranty too.
Look at section 8 im happy now i finally got quality customer service. A second will be on the cards too if i win the lotto.
Anyways im 10m in still 5 bars at 210c im going to stopwatch it and note the time i get from 1 charge note that down and redo that test next year. If its degrading ill pop it in the post because S&B said there they will honor the past promise for a battery change at 60 euro. I loojed the website T&C it states anything they say in writing must be upheld and it still says you can get a repair done outside of warranty too.
Look at section 8 im happy now i finally got quality customer service. A second will be on the cards too if i win the lotto.
Baron23
Well-Known Member
verdampersweats
Well-Known Member
You will be happy i had some anxiety about mine too when the desktop herborizer xl broke it was all i had i think its as good almost.
The only issue is bowl size maybe if you use capsules with screens at both ends like me you can do moonrocks and kief and oil from the reclaim but i find you get 3 hits at 210c and the 4th is really thin if i was rich i would toss the fourth but the first 3 make me cough like the herborizer.
You know when you have to put your face in front of a fan it was a big hit thats me spluttering in front of a fan going OMG *relief* and it can milk the bubbler which is the same size as the roor bubbler for those 3 hits.
kaisersosay415
Well-Known Member
Can someone suggest a case for the mighty something similar to the one above for the crafty
vapviking
Old & In the Way
Isn't the one pictured above a Mighty?
Puffitup has a case on their site with the other Mighty accessories.
Razshiro
Well-Known Member
I don't know if those videos has been posted here (sorry if it's the case) , finally they made an official "Function Principle" & "cleaning" videos:
@kaisersosay415 It's a Mighty in this case
@kaisersosay415 It's a Mighty in this case
wildything
Well-Known Member
The large size option of these cases fits the mighty nice and snug! The latches may be a bit hard to open but for the price it can't be beat
Edit- they are also air tight and can fit some capsules inside it with the mighty
https://www.ebay.com/itm/Waterproof-Shockproof-Airtight-Box-Outdoor-Container-Jewery-Storage-Carry-Case/282351620696?ssPageName=STRK:MEBIDX:IT&var=581467292746&_trksid=p2055119.m1438.l2649
Last edited:
kaisersosay415
Well-Known Member
Where did you get this case from
mixchu69
Well-Known Member
Is that airtight? Been looking for a case that is smellproof, and was going to pull the trigger on the ryot during their 420 sale but got too medicated and fell asleep.....
Can i get a link please? Thanks.
Two random questions:
1) Is there anything "special" about the material of the brush that you get with the mighty? Mine is getting worn out.
2) We all know the sticky residue that fills our CU after a while. I keep worrying myself if that residue also builds up in my lungs. Is there any research on that? I am not sure what i should search for.
Have a nice day!
1) Is there anything "special" about the material of the brush that you get with the mighty? Mine is getting worn out.
2) We all know the sticky residue that fills our CU after a while. I keep worrying myself if that residue also builds up in my lungs. Is there any research on that? I am not sure what i should search for.
Have a nice day!
Homefoodhealth
Member
The case above is for the mighty, it is the vape suite soft case, excellent case, hard to find.
The weirdest thing just happened. We were Vaping the last of a bowl of green crack on 400 and suddenly there was oil on our lips And teeth, and dripping out of the mouthpiece. I could taste
it in my mouth. Had to actually clean my lips with 91% alcohol not once but two or three times, rinsing With water of course. I was afraid my lips were going to get stuck together! some oil is still stuck to the inside of my front teeth. Gonna be interesting trying to floss tonight!
Man, my cooling unit must be more gunked up than I thought! A veritable gold mine of gunk! I’m almost afraid to open it.
seriously, Has this happened to anyone else?
it in my mouth. Had to actually clean my lips with 91% alcohol not once but two or three times, rinsing With water of course. I was afraid my lips were going to get stuck together! some oil is still stuck to the inside of my front teeth. Gonna be interesting trying to floss tonight!
Man, my cooling unit must be more gunked up than I thought! A veritable gold mine of gunk! I’m almost afraid to open it.
seriously, Has this happened to anyone else?
Last edited:
vapviking
Old & In the Way
Not with Mighty, 'cause I clean the CU regularly.
Grasshopper does it quite a bit, since it runs kinda hot in the short air path from the chamber to the opening of the mouthpiece; so little area for any gunk to collect.
When I take the CU off of Mighty for filling, I can tall by the 'heft' of it how clean it is, partly by weight and in part by a dampened sound. When clean it will feel/sound kinda tinny, when it's gunked it has a kinda dull feel and sound.
Massey64
Well-Known Member
Can confirm this has happened to me a few times before. Just means the CU is full of goodness!
If you’re having trouble cleaning the mouth piece and can’t be bothered with an iso soak I’ve found once the CU is warm you can push a small bit of cotton through the mouthpiece with a toothpick then vape the oil off it. I use ecig cotton as I’ve got it lying around. Obviously make sure anything you’re vaping is safe to do so!
verdampersweats
Well-Known Member
I never had a drop of gunk until using one with caps now the bongs a lot cleaner but 1 week the easyflow starts to drip.
The best organic way of collection is heat it a little so its runny and swab some stem in roll and gunk it up and vape the small bit of stem in the capsules with bud.
The best organic way of collection is heat it a little so its runny and swab some stem in roll and gunk it up and vape the small bit of stem in the capsules with bud.
Hi everyone
The mighty has arrived today.
Just after some tips before I delve in!
Do I need to do a burn off before using and for how long?
Should I start with the original mouth piece to try it out or go straight in with the bubbler or bong?
If using a water tool, should I use tap water, bottled water and what temperature? Is colder water better?
Thanks
The mighty has arrived today.
Just after some tips before I delve in!
Do I need to do a burn off before using and for how long?
Should I start with the original mouth piece to try it out or go straight in with the bubbler or bong?
If using a water tool, should I use tap water, bottled water and what temperature? Is colder water better?
Thanks
BigJr48
Well-Known Member
I'm awaiting for mine to arrive as well, my understanding it's recommended to do burn-offs with the cooling unit on and at least one with some ABV to get rid of any smell.
Like any newvape I would do a few burn offs just to be safe for any manufacturing oils.
Search this thread a bit what I would do for my first experience:
I like to grind pretty fine, Load your bowl all the way up without tamping yet, I like to actually put a screen on top of the load, I even tore a bunch of those liquid pads as best I could in half to put on top of the load, that may not be ideal.
Early on it was discovered that you can make a screen look like Pac-Man just make a small slit in it to put on top of your load and it's easy to pull out after that way, really these just keep your load in place.
Screw on the cooling unit, turn on the mighty and I would start at about a hundred and eighty-five , a hundred and Ninety Degrees Celsius.
Let it get to temperature and even let it sit at temp for 30 seconds or so if you want.
Then take a nice long 10 to 15 second draw.
Should be good from the first draw if not from the second, enjoy.
Search this thread a bit what I would do for my first experience:
I like to grind pretty fine, Load your bowl all the way up without tamping yet, I like to actually put a screen on top of the load, I even tore a bunch of those liquid pads as best I could in half to put on top of the load, that may not be ideal.
Early on it was discovered that you can make a screen look like Pac-Man just make a small slit in it to put on top of your load and it's easy to pull out after that way, really these just keep your load in place.
Screw on the cooling unit, turn on the mighty and I would start at about a hundred and eighty-five , a hundred and Ninety Degrees Celsius.
Let it get to temperature and even let it sit at temp for 30 seconds or so if you want.
Then take a nice long 10 to 15 second draw.
Should be good from the first draw if not from the second, enjoy.