Hi all,
RedEyeFlightControl here, to introduce the next vaporizer release from REFC-Labs.com and friends!
The HighLighTED - The HighLighter Thermal Extraction Device
This project took about 6 months and was recently completed by the Scientifically Higher Design Collective (also including @khelek41girl APwinger, Ketheptis, and @AWistfulNihilist )
-A brief history-
Halogen heaters have always been a desirable concept, as well as a highly performant heat source. Our dev group decided to pursue a side project that one of its members really wanted, so we designed a DIY kit to make available a highly-performant, clean, simple, cheap, and easily repair/replaceable Log style heater core module, which could be used any way as the pilot desires. Over the course of 6 months or so, this design has been peer- refined, upgraded, tested, and re-tested by industry leading inventors/makers/manufacturers.
Current release is tentatively 2-3 weeks from now as early-access users and influencers begin posting information / pics / videos of this heater.
-Current Status-
The HighLighter is a DIY Kit. It is designed to be as easy as possible to assemble, while requiring little to no prior knowledge to build. It requires only several common tools, and every component is a commodity piece of hardware, meaning you should always be able to find parts, regardless of whether it's from my store, or one of the other dev's stores. Our goal was to make this as attainable as possible, to the largest group as possible. Kits will be sold in batches to start, to ensure there are no major launch issues, and that proper support and guidance can be given as needed. I'm expecting to do 20 a week to start. This may very well change if/when this project ramps up.
Wood heat shields (as pictured in some of my IG posts) will start becoming available as an upgrade option. The naked core performs very well, however, a heat shield provides not only a caloric retention upgrade, but a beautiful and unique way to hold and display your core.
The reasons for this decision were three fold - one , the devs of this project have limited bandwidth and may not be able to crank these out as often as we'd like, given expected demand. Two, naked core performance is good enough where the heat shield is not necessary, so those who don't want to drop premium cash for a premium piece of wood or the upgrade in performance, don't need to .
Three, this is an open invite to all other makers, wood turners, artisans, manufacturers - to come and play along in making and selling heat shields!
That's right! I'll be providing the heat shield dimensional spec to whomever wants it - I want to see what other community members can offer for our little core project. Have fun, go mad, design something cool and sell it! We want the whole community to have a part in benefiting from this and we feel the heat shield is the way to do it. This also lets the buyer buy a heat shield from their preferred artist, and sends that artist business! I see this as an absolute win.
-And the other things-
I also make and manufacture the JetDryV, and vend a number of vapes, accessories, and parts, including rigs, spare glass, torches, and an assortment of Custom Dynavap Titanium (one of my other specialties). I am an authorized retailer of Elev8, Dynavap, Pulsar Premium Glass, S&B, Stache, RAW, GRAV, ACE LABZ, Molicel, and other big names. If you don't see it listed, and think it's worthy of the lab, drop me a line and we can talk!. My business is continually growing while I curate the best of the very best for everyone, so please check back from time to time as new products are regularly added to the store.
I'll do my best to answer questions objectively.
The HighLighter Kit will be available at retail pricing (soon, when in stock) here:
refc-labs.com
Individual spare parts will be listed soon, as well.
Please follow my IG or subscribe to my site newsletter to be the first to know about availability!
All the best,
Red
Thanks for the interest!
PS: Some vids:
www.instagram.com
RedEyeFlightControl here, to introduce the next vaporizer release from REFC-Labs.com and friends!
The HighLighTED - The HighLighter Thermal Extraction Device
This project took about 6 months and was recently completed by the Scientifically Higher Design Collective (also including @khelek41girl APwinger, Ketheptis, and @AWistfulNihilist )
-A brief history-
Halogen heaters have always been a desirable concept, as well as a highly performant heat source. Our dev group decided to pursue a side project that one of its members really wanted, so we designed a DIY kit to make available a highly-performant, clean, simple, cheap, and easily repair/replaceable Log style heater core module, which could be used any way as the pilot desires. Over the course of 6 months or so, this design has been peer- refined, upgraded, tested, and re-tested by industry leading inventors/makers/manufacturers.
Current release is tentatively 2-3 weeks from now as early-access users and influencers begin posting information / pics / videos of this heater.
-Current Status-
The HighLighter is a DIY Kit. It is designed to be as easy as possible to assemble, while requiring little to no prior knowledge to build. It requires only several common tools, and every component is a commodity piece of hardware, meaning you should always be able to find parts, regardless of whether it's from my store, or one of the other dev's stores. Our goal was to make this as attainable as possible, to the largest group as possible. Kits will be sold in batches to start, to ensure there are no major launch issues, and that proper support and guidance can be given as needed. I'm expecting to do 20 a week to start. This may very well change if/when this project ramps up.
Wood heat shields (as pictured in some of my IG posts) will start becoming available as an upgrade option. The naked core performs very well, however, a heat shield provides not only a caloric retention upgrade, but a beautiful and unique way to hold and display your core.
The reasons for this decision were three fold - one , the devs of this project have limited bandwidth and may not be able to crank these out as often as we'd like, given expected demand. Two, naked core performance is good enough where the heat shield is not necessary, so those who don't want to drop premium cash for a premium piece of wood or the upgrade in performance, don't need to .
Three, this is an open invite to all other makers, wood turners, artisans, manufacturers - to come and play along in making and selling heat shields!
That's right! I'll be providing the heat shield dimensional spec to whomever wants it - I want to see what other community members can offer for our little core project. Have fun, go mad, design something cool and sell it! We want the whole community to have a part in benefiting from this and we feel the heat shield is the way to do it. This also lets the buyer buy a heat shield from their preferred artist, and sends that artist business! I see this as an absolute win.
-And the other things-
I also make and manufacture the JetDryV, and vend a number of vapes, accessories, and parts, including rigs, spare glass, torches, and an assortment of Custom Dynavap Titanium (one of my other specialties). I am an authorized retailer of Elev8, Dynavap, Pulsar Premium Glass, S&B, Stache, RAW, GRAV, ACE LABZ, Molicel, and other big names. If you don't see it listed, and think it's worthy of the lab, drop me a line and we can talk!. My business is continually growing while I curate the best of the very best for everyone, so please check back from time to time as new products are regularly added to the store.
I'll do my best to answer questions objectively.
The HighLighter Kit will be available at retail pricing (soon, when in stock) here:
HighLighter Core DIY Kit
This kit contains all parts for one HighLighter Core DIY kit, except for the variable voltage power supply and a lab clamp or stand/rest. Add your own variable voltage power supply to this kit and you're ready to go! ----- Looking for next-gen control for your core? Pair your HLT with the...
Individual spare parts will be listed soon, as well.
Please follow my IG or subscribe to my site newsletter to be the first to know about availability!
All the best,
Red
Thanks for the interest!
PS: Some vids:
RedEye FlightControl on Instagram: "Milking the Infinity rig with a HighLighter! #teasetease #allkidslovelog #HighLighter #diy #comingsoon #vaporents #420 #420daily #420community #vaporizer #fuckcombustion #dryherbvaporizer #dryherb #dryherbvapes
108 likes, 13 comments - redeyeflightcontrol on June 6, 2021: "Milking the Infinity rig with a HighLighter! #teasetease #allkidslovelog #HighLighter #diy #comingsoon #vaporents #420 #420daily #420community #vaporizer #fuckcombustion #dryherbvaporizer #dryherb #dryherbvapes #log #woodworking...
www.instagram.com
)
