CanikUser19
Trenchtown Rock
Here’s a link
Also, sounds like you have RBT devices, correct? Those have 18mm female joints as well.
-
SCAM WARNING! See how this scam works in Classifieds.
The GTR
- Thread starter Alan
- Start date
-
- Tags
- 12v 18mm heavy-hitter wood
Also, sounds like you have RBT devices, correct? Those have 18mm female joints as well.
coolbreeze
Well-Known Member
Yes, you kind of pack it lightly so the herb stays put and then insert it into the heater core. You want to hold it sort of horizontal or inverted on glass, but it works great.
Yeah, that first pic was what I meant by wooden stem. Only one RBT stem that I ordered for my Stempod.
Ok, so now you and Coolbreeze have shown me what I didn't think was an option, the wood just goes right into the oven. Is that a @khelek41girl convertor?? Now we're getting somewhere, lol.
Now I understand. I didn't think the wood was meant to go in there. Big thanks to you guys, appreciate it. I think I'm gonna go with the female and mod it a bit.Yes, you kind of pack it lightly so the herb stays put and then insert it into the heater core. You want to hold it sort of horizontal or inverted on glass, but it works great.
CanikUser19
Trenchtown Rock
Yes that is a @khelek41girl adapter.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
So it is actually just like that, heating element is below the load and joint connection
Yeah so it's the same thing, except to be clear the actual heater is still below, the area around it is not as hot to vape, but will get hot to the touch
Yeah, now it makes a little more sense to me, I never realized people were making female logs. Thanks.
Looper714
Well-Known Member
Hi there, after 3 years on Alan's wait list, he has just emailed me with availability of a few female end GTR units available. They are reasonably priced, however I have bought an Ed's TNT log as well as an Underdog log (18mm connection) and have been using them for 2 years now with great results. Do I really need the GTR since I already own 2 great log vapes? Also, if I purchased the 18mm female ss, what tube or bowl do I need, I'm need feedback from other GTR users. Thanks!
CanikUser19
Trenchtown Rock
As you well know it’s never about need with us once we get to a certain point in device ownership. I have way too many logs and still jumped at the chance when my name came up last year for a GTR. I went with the 18mm female in SS. I got a few of Alan’s stems that he recommended. I was also pleased to find that all of my 18mm stems from other devices work as well. So if you have other devices that take 18mm stems and you have plenty already, no need to go overboard. Alan’s stem work is top notch though, so I’m glad I bought a few of his as well.
coolbreeze
Well-Known Member
I received mine recently, they're both 18mm female, one glass, one steel. They join a Couch Log, 2 Woodscents, an Alphadog and a MUSA. I'm still getting to know them but they are very different from the others. I'd rank them with the CouchLog and Alpha in terms of power--they're up there (MUSA's powerful too). What's unique is the open draw, there's minimal resistance.
I got them because they were intended to be powerful (they are!), they would fit much of my gear, and because I'd seen Alan's work and had to have a bit for my own. They glass core I got to have a kind of pure pathway and the steel for durability, to take on vacation, hook up to a battery camping, etc. They're pretty different from each other in terms of power settings and even how they interface with some stems.
The advantages for me are: power, beauty & build, durability and purity, great prices, and mostly, they interface with 18mm male joints and wood or glass RBT style stems. Alan's stems--I have the newer modular ones--are of course the best. He also sent me a paper tube WPA with a cork handle and that's superb as well. I use the others mostly just to fit different pipes and to reduce load size a little easier.
From Alan, I'd definitely look into the modular ones, they are so good. Also ask about some paper options--it's a really neat idea well-realized.
Last edited:
coolbreeze
Well-Known Member
Ed's 18mm RBT stems are perfect and so are the Pyro Tech Vigreux stems. These are the stems from Alan that I got:
Toasty Roasting Tubes
I have been making stainless steel, glass, silicone, and wood tubes for my herbal roasters for over 10 years now. My website is finally updated to show the majority of the ones I make, so it’s time to start a thread for them. Toasty Roasting Tubes I refer to them as “Roasting Tubes”, since...
fuckcombustion.com
The short part is an 18mm Male bowl with an 18mm male joint, on the long stem. There's a 14mm wpa for it, and a 18mm female injector bowl for the joint or stem. Mine are glass-lined, with paper lining the area under the screen.
Last edited:
coolbreeze
Well-Known Member
Happy Friday--cheers!
darkstar72
Well-Known Member
@coolbreeze That is one beautiful piece of @Alan s work. What type of wood is that? It’s amazing and I bet it’s pure convection bliss. Tempted to sign back up.
coolbreeze
Well-Known Member
It's Maple burl, and thank you, I can't get over how gorgeous it is. It is pretty much "pure convection bliss," as you say! Rejoin the list! Time will pass and there you'll be! ; )
Looper714
Well-Known Member
New Cherrywood SS female GTR with maple roasting tube, clear glass tube and wpa. The wood roasting tube is in two pieces - the long tapered end of the tube fits in the short end roasting chamber; I ordered a glass tube to line the long end of the roasting tube and you can also use a paper liner, and a paper liner is inside the roasting chamber up to where the screen sits. You can get a colored glass tube from Alan but I prefer clear glass. You do not necessarily need Alan's wpa, both my Underdog and Arizer solo wpas work just as well, and the Arizer wpa is easier to pull out. I would like to find a wpa with a glass screen that would work and if anyone knows on any, please let me know. Be careful using 18mm male pieces into the female GTR, they will get stuck.
I have been using the GTR exclusively for the last 2 weeks, and also own an Underdog Alpha and Woodscents. So far, the GTR has the most unrestricted airflow while delivering excellent vapor, at least as powerful as the Woodscents, and more powerful than the UD. A lot of versatility with this log as a lot of different tubes/adapters will work; I have used an Arizer solo bent stem with a glass screen (put an o-ring around to basket end to keep in place in the log), several of my UD tubes work, and still experimenting with other stems/adapters. I have been using Alan's glass tube and the Arizer solo tube for micro-dosing, and the wood roasting tube for sessions - the hits are great no matter the load size. The GTR works well with a water piece, however I have been enjoying dry vaping more with the GTR - no matter which tube, the vapor is smooth, tasty, thick, and rarely makes me cough.
I am still playing with different watt settings, and depending on the degree to which I want to get medicated, have been setting the watts between 10.5 - 11.3. I have not had to wait nor have experienced any degradation of temp or vape quality after doing 5-6 hits back to back. This is built with Heat Island technology and can be left on 24/7, although I turn mine off overnight.
I was hesitant to add another log to my small collection and soooooo glad I did - Alan makes top notch products!
Cheers and happy roasting!
I have been using the GTR exclusively for the last 2 weeks, and also own an Underdog Alpha and Woodscents. So far, the GTR has the most unrestricted airflow while delivering excellent vapor, at least as powerful as the Woodscents, and more powerful than the UD. A lot of versatility with this log as a lot of different tubes/adapters will work; I have used an Arizer solo bent stem with a glass screen (put an o-ring around to basket end to keep in place in the log), several of my UD tubes work, and still experimenting with other stems/adapters. I have been using Alan's glass tube and the Arizer solo tube for micro-dosing, and the wood roasting tube for sessions - the hits are great no matter the load size. The GTR works well with a water piece, however I have been enjoying dry vaping more with the GTR - no matter which tube, the vapor is smooth, tasty, thick, and rarely makes me cough.
I am still playing with different watt settings, and depending on the degree to which I want to get medicated, have been setting the watts between 10.5 - 11.3. I have not had to wait nor have experienced any degradation of temp or vape quality after doing 5-6 hits back to back. This is built with Heat Island technology and can be left on 24/7, although I turn mine off overnight.
I was hesitant to add another log to my small collection and soooooo glad I did - Alan makes top notch products!
Cheers and happy roasting!
coolbreeze
Well-Known Member
Gorgeous! What a wonderful piece of cherry!New Cherrywood SS female GTR with maple roasting tube, clear glass tube and wpa. The wood roasting tube is in two pieces - the long tapered end of the tube fits in the short end roasting chamber; I ordered a glass tube to line the long end of the roasting tube and you can also use a paper liner, and a paper liner is inside the roasting chamber up to where the screen sits. You can get a colored glass tube from Alan but I prefer clear glass. You do not necessarily need Alan's wpa, both my Underdog and Arizer solo wpas work just as well, and the Arizer wpa is easier to pull out. I would like to find a wpa with a glass screen that would work and if anyone knows on any, please let me know. Be careful using 18mm male pieces into the female GTR, they will get stuck.
I have been using the GTR exclusively for the last 2 weeks, and also own an Underdog Alpha and Woodscents. So far, the GTR has the most unrestricted airflow while delivering excellent vapor, at least as powerful as the Woodscents, and more powerful than the UD. A lot of versatility with this log as a lot of different tubes/adapters will work; I have used an Arizer solo bent stem with a glass screen (put an o-ring around to basket end to keep in place in the log), several of my UD tubes work, and still experimenting with other stems/adapters. I have been using Alan's glass tube and the Arizer solo tube for micro-dosing, and the wood roasting tube for sessions - the hits are great no matter the load size. The GTR works well with a water piece, however I have been enjoying dry vaping more with the GTR - no matter which tube, the vapor is smooth, tasty, thick, and rarely makes me cough.
I am still playing with different watt settings, and depending on the degree to which I want to get medicated, have been setting the watts between 10.5 - 11.3. I have not had to wait nor have experienced any degradation of temp or vape quality after doing 5-6 hits back to back. This is built with Heat Island technology and can be left on 24/7, although I turn mine off overnight.
I was hesitant to add another log to my small collection and soooooo glad I did - Alan makes top notch products!
Cheers and happy roasting!