The Extreme-Q Vaporizer

vis

New Member
what would vaporize last i wonder? some part of the high that i care about? we shall see. :science:
You might find this infographic useful for vaping temperatures .
cavN6jbl.jpg
 

nacho257

Well-Known Member
Sorry if this has already been posted but I couldn't find it, but why do we need a much higher temperature setting when using the whip? I use 200C for bags but need 230C for the whip....granted I haven't done the DDave mods yet...

Also very interested chart @vis, but do we know the temperature that actually reaches the elbow? If I set my Q at 200C, is that what the temperature of the herb is?
 
nacho257,

hoptimum

Well-Known Member
Sorry if this has already been posted but I couldn't find it, but why do we need a much higher temperature setting when using the whip? I use 200C for bags but need 230C for the whip....granted I haven't done the DDave mods yet...

Also very interested chart @vis, but do we know the temperature that actually reaches the elbow? If I set my Q at 200C, is that what the temperature of the herb is?


I wouldn't put a lot of faith in the numbers you read on the EQ display. They're probably off at least 10 degrees when it comes to the temp hitting your herb.
 

JetLife1

Member
Sorry if this has already been posted but I couldn't find it, but why do we need a much higher temperature setting when using the whip? I use 200C for bags but need 230C for the whip....granted I haven't done the DDave mods yet...
It's either the stock cyclone bowl, or your technique. Using the whip is good for me at any temperature, but I have the modded cyclone bowl.

Are you preheating? Try preheating everything for AT LEAST 10 mins prior to use. I read a post recently where they said 15 minutes pre-heat. I don't know about that though.

I think a lot of it is just technique. I can vape immediately on a stone cold setup by just inhaling super slow to heat up the herb.
 

nacho257

Well-Known Member
It's either the stock cyclone bowl, or your technique. Using the whip is good for me at any temperature, but I have the modded cyclone bowl.

Are you preheating? Try preheating everything for AT LEAST 10 mins prior to use. I read a post recently where they said 15 minutes pre-heat. I don't know about that though.

I think a lot of it is just technique. I can vape immediately on a stone cold setup by just inhaling super slow to heat up the herb.

Interesting, I'm usually impatient, I'll have to try preheating longer ( I do preheat though). I still find, however, that I can use the whip at temps like 230-250C, whereas if I get much above 210C with a bag it starts to hit wayy to hard and seems very near combustion.

Also, does anyone use the MFLB orbiter inline with your whip? I was just curious how/if this makes a difference. I love hitting the Q out of a bong, would a small inline bubbler apparatus (aka Orbiter) make a big difference?
 
nacho257,

sickmanfraud

Well-Known Member
Interesting, I'm usually impatient, I'll have to try preheating longer ( I do preheat though). I still find, however, that I can use the whip at temps like 230-250C, whereas if I get much above 210C with a bag it starts to hit wayy to hard and seems very near combustion.

Also, does anyone use the MFLB orbiter inline with your whip? I was just curious how/if this makes a difference. I love hitting the Q out of a bong, would a small inline bubbler apparatus (aka Orbiter) make a big difference?

If someone wants to vaporbong with an Extreme Q the way I would recommend is to get a Vortex adapter for the Q. It is available from Planetvape and it is cheaper than the vortex stems.

You can then Use the Q with a 14 mm or 18 mm bubbler.

http://www.planetvape.ca/extreme-q-glass-vortex-adapter.html

Mine will be in my hands next Tuesday. I will try to report back.

Note to moderator, I am not sure if I am allowed to provide link. If there is a problem, please just edit.
 
sickmanfraud,
  • Like
Reactions: psycro

mizzlefizzle

New Member
How has your hunt for sillicone tube gone? i was going to get some red and blue hose from thie ebay seller:
http://www.ebay.com.au/itm/161267752730?var=460349026066
seems cheap and in a few different sizes, am i right in thinking 6mm id will work?
I havent made the purchase yet. Did you ever find out if this was the correct tubing size?

This was perfect! Everything arrived today, but I have one issue.

If I load herb into the bottom of the wand, there's no screen to stop it from falling out directly down into the adapter you linked, onto the heating element, and completely wasted. How do people solve this? Do I need to buy some small spheres, or use the ddave adapter everybody talks about? I'm not sure where to buy that even, every site I saw was down.

Or is the ddave adapter the one I already bought? I think so... so I just need a screen to help keep the herb inside the wand. Are there any particular ones people use? My old EQ screens got tossed when the glass broke
yep, order some additional screens for the DDAVE adapter you bought or invent something.
 
Last edited by a moderator:
mizzlefizzle,
  • Like
Reactions: DDave

ichibaneye

Vapriot, Traveler & Vaporizer/ing lover!
You should check out my EQ bong set up pictures in this thread.

I never really have any irritation taking dry higher temperature hits. However with my set up I can, most of the time get larger more dense vapor by the water filtration.

That is a bonus already if you like taking deep, long lungerz.

As for flavor loss, none detected from my testing. In fact at times while comparing my dry hits to my water hits with the same strain I was able to detect other flavor blooms. Most of the time being more pronounced and enjoyable to me over the flavor of the dry hits.

Just stat on top of keeping your water clean at all times and it is much more enjoyable. I also use very clean filtered water, not the basic charcoal filtered stuff. Good clean quality herb, clean healthy water and glass makes all the difference for me while exploring vapor land. Cheers! :cheers:

Interesting, I'm usually impatient, I'll have to try preheating longer ( I do preheat though). I still find, however, that I can use the whip at temps like 230-250C, whereas if I get much above 210C with a bag it starts to hit wayy to hard and seems very near combustion.

Also, does anyone use the MFLB orbiter inline with your whip? I was just curious how/if this makes a difference. I love hitting the Q out of a bong, would a small inline bubbler apparatus (aka Orbiter) make a big difference?
 

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
If someone wants to vaporbong with an Extreme Q the way I would recommend is to get a Vortex adapter for the Q.

Or just use your SSV wand setup like this:

EQ&Solo.jpg

That's the Arizer Solo on the other side of the claisen adapter.

As much as I like the new Vortex adapter, I don't risk having my water tube above my vaporizer anymore having had water end up in my Solo several times. I only use them at the end of the whip like a regular bubbler. The EQ is particularly problematic due to the fan and other electronics. Looks really cool, but I'm low income, so not worth the risk to me!!
 
Dr. Soxhlet,
  • Like
Reactions: RUDE BOY

ean

Well-Known Member
Just received my eq in the mail yesterday. had a very nice time learning the ropes yesterday. currently packing elbows, may go pick up an 18-18 adapter later. would love to have anybody pm me with some hacks/tips. Thanks everyone!
 

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
Just received my eq in the mail yesterday. had a very nice time learning the ropes yesterday. currently packing elbows, may go pick up an 18-18 adapter later. would love to have anybody pm me with some hacks/tips. Thanks everyone!

I'm sure you will love the EQ! I have had mine for 5 years. With the recent mods it works even better than stock. Absolutely one of the best vaporizer buys out there!!!
 

Sungodv

Well-Known Member
Just received my eq in the mail yesterday. had a very nice time learning the ropes yesterday. currently packing elbows, may go pick up an 18-18 adapter later. would love to have anybody pm me with some hacks/tips. Thanks everyone!
Get a shorter 18mm female to 18mm female. Makes a big diff... 345f-ish is where I like mine. Also got a Da Buddha / SSV silicone tube to replace the vinyl. Jet black so I don't see the brownness.
 

JetLife1

Member
Did some fan speed #1 assisted whip hits. That was the most flavorful hit I've had in a while.

Is it harmful to plug the whip while the fan is running?
It's annoying to turn it on and off, but almost worth it.
That would be sweet if it had an automatic fan when you inhaled.
 

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
Did some fan speed #1 assisted whip hits. That was the most flavorful hit I've had in a while.

Is it harmful to plug the whip while the fan is running?
I don't think that would be a problem.
As far as damage to the fan goes, the thing to watch for is ABV falling down into the fan. I've had mine for five years, but have had to blow it out and even carefully disassemble and clean whenever the fan slowed or stopped.
The fan operated by the remote is one of the best things about the EQ.
 

ichibaneye

Vapriot, Traveler & Vaporizer/ing lover!
Did some fan speed #1 assisted whip hits. That was the most flavorful hit I've had in a while.

Is it harmful to plug the whip while the fan is running?
It's annoying to turn it on and off, but almost worth it.
That would be sweet if it had an automatic fan when you inhaled.
Did some fan speed #1 assisted whip hits. That was the most flavorful hit I've had in a while.

Is it harmful to plug the whip while the fan is running?
It's annoying to turn it on and off, but almost worth it.
That would be sweet if it had an automatic fan when you inhaled.

I suggest getting time in using that handy remote fan control. It's simple and very useful for taking monster fan assisted draws. One hand on the whip one hand on the remote ...... it's blow time! After a few of these I'm totally whipped. :rofl: I
like using all 3 fan speeds during my draws. It keeps things interesting for sure. Cheers!:cheers:
 
ichibaneye,

VANVAS

Well-Known Member
Im trying ddave mode elbow pack and i have to say the amount of vapor is incredible!
Since i've got the EQ always i think if maybe is something wrong cause for example now with elbow pack ddave mode at 200c i can take like 5-6 very good full vapor hits and when i don't see vapor, i put temp at 230c and no vapor comes just a little bit, are 30c difference , you guys think is something wrong? Would i have to see vapor ?
With bags is same , first bag full of vapor , second bag there are vapor but no full even going up temp
Tia
 
VANVAS,
  • Like
Reactions: DDave

Justpassedu

Well-Known Member
I currently run my Ddave adapter but i never go with a elbow pack. I am wondering why most prefer the elbow pack. In theory packing the Ddave your material is closer to the heater rather than having it further away in the elbow. So i do not really understand , i find i get bigger clouds/mouthfuls of vapor when i have it closer to the heater. Plus i can fit more material for big group sessions.
 

psycro

Hippo Lungz
I also use the Orbiter occassionally with the Extreme Q, plugging a long whip from elbow into the diffusor. It allows me to comfortably lie on my bed and sip from the orbiter directly.
 

philmcan

Flying high
vnfyjd7.jpg


The 18mm female to female adapter is such a great upgrade. Hard hitting and tasty. Thanks to every body in this thread.
 
philmcan,
  • Like
Reactions: nacho257

bkpnsux

Well-Known Member
Who's got the best price around for a 18mm f/f adapter? I've looked around on ebay and the prices range quite a bit. I found one for $5 USD plus $8.70 shipping but unfortunately they don't ship to Canada.
Any ideas where I can get one of these in Canada for around $15?

Thanks friends!
 
bkpnsux,

philmcan

Flying high
Who's got the best price around for a 18mm f/f adapter? I've looked around on ebay and the prices range quite a bit. I found one for $5 USD plus $8.70 shipping but unfortunately they don't ship to Canada.
Any ideas where I can get one of these in Canada for around $15?

Thanks friends!

Do you have any head shops/tobacco stores that sell oil rigs? My local shop has them for $5 otd. Hope this helps.
 
philmcan,

bkpnsux

Well-Known Member
I actually called 4 head shops local to me and one about 20 mins away said they had the adapter in stock. I went this afternoon and sure enough they didn't have any 18mm f/f, only 14mm.

I ended up biting the bullet and bought a lot of 5 from DHGate.com

http://www.dhgate.com/product/facto...s-adapter-14/212853819.html#s1-0-1|1376016660

Hopefully they're the right ones.. I purchased based on a review that said they were bought to use with an Arizer Extreme Q... we will see.. I'll post a review once I've received them.
 
bkpnsux,

vis

New Member
I actually called 4 head shops local to me and one about 20 mins away said they had the adapter in stock. I went this afternoon and sure enough they didn't have any 18mm f/f, only 14mm.

I ended up biting the bullet and bought a lot of 5 from DHGate.com

http://www.dhgate.com/product/facto...s-adapter-14/212853819.html#s1-0-1|1376016660

Hopefully they're the right ones.. I purchased based on a review that said they were bought to use with an Arizer Extreme Q... we will see.. I'll post a review once I've received them.
I think you bought the wrong ones.
"14 & 19 female converter" means both ends are female but one end is 19mm and one is 14mm.
I would try to get those refunded before they ship.
 
vis,
Top Bottom