Discontinued Splinter Z by RBT

Status
Not open for further replies.
Mynameismud

Mynameismud

Accessory Maker
Accessory Maker
buddingglasshead said:
@TiSteamo There is also the option of using two baskets. One at the top of the joint and the one at the bottom and filling in between. Can easily fit .5g or more depending on grind and pack. Doing that at a low temperature would last you a long time.

I've seen your posts in a few threads. Unfortunately I don't think any modern vape is going to replicate the same experience you get with your swift pro. I hope you are able to find something that fits your needs!
Click to expand...

Ive done this a few times, I found that the length the bowl lasts is still pretty much the same regardless if your using the basket or filling the entire joint. The only difference i noticed is that packing the whole
joint results in more potent vapor

Is there a good side by side pic of a splinter v2 and the splinter Z is it that much bigger i googled a side by side pic and it looks almost double the length...

is there a difference in production/flavor between the two? now that i have the hang of the v2 im tempted to get the Z is it worth it?
 
HerbieVonVapster

HerbieVonVapster

Well-Known Member
Mynameismud said:
Is there a good side by side pic of a splinter v2 and the splinter Z is it that much bigger i googled a side by side pic and it looks almost double the length...

is there a difference in production/flavor between the two? now that i have the hang of the v2 im tempted to get the Z is it worth it?
Click to expand...

I have one of the older 19/22 splinters and I felt getting the splinterZ was a nice upgrade over it. I also heard good things about the splinter V.1 and V.2. So my experience might be a little bit outdated on the current difference between them. Im sure others can give you a better comparison with the V2 than currently able too.
 
HerbieVonVapster,
  • Like
Reactions: Easywider
K

KRnoS

Well-Known Member
Splinter Z will be my next vaporizer, and since I'm in the USA, I'll be picking it up from PuffItUp.

Now the question is if I want to wait until the 4/20 sales start to trickle in. Hmmmmm
 
KRnoS,
  • Like
Reactions: VGOODIEZ
Shit Snacks

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
KRnoS said:
Splinter Z will be my next vaporizer, and since I'm in the USA, I'll be picking it up from PuffItUp.

Now the question is if I want to wait until the 4/20 sales start to trickle in. Hmmmmm
Click to expand...

Vgoodiez is also an amazing retailer in the US and will definitely have some nice 420 sales btw! Maybe even custom Zs
 
nachooo

nachooo

Well-Known Member
Hi all, just here to show you my poor man splinter z mouthpiece…

As my main concern about splinter z is its vertical size, and the cooling mouthpieces are very long and expensive for me...not to speak about stealth and their tendency to fall and break...
So I decided to make some cooling short mouthpieces..the cheapest I can

I found in a chinese store a hookah conector that for about 2$ or less can be used as the main body of the mouthpiece… Have to use dremel for reduce some mm of glass…(use mask to avoid glass dust)..anyway is an easy task and the glass did not break. The piece adapted perfectly in my splinter Z.

You can use it at this moment and for me ..is better than the short mouthpiece that comes with the splinter Z...and has a thicker glass that cool better ..

But as I wanted cooling propierties I bought a few glass beads of 5mm diameter with a hole in the center (cheaper ones) about 0,15 $ cost per mouthpiece…

For the Steel basket..you can find the unit for about 1 / 0,5 $ each

So...about 3 $ for a super short cooling mouthpiece…there were not shipping costs only waiting time

The irony..is that the glass beds last to arrive and I get used to hotter air...I can control better the use feeling the hot air...

Anyway the glass beads cool the air nicely…




de4579.jpg


m7febt.jpg
 
Last edited:
Shit Snacks

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Unfortunately dropped (almost gently tossed lol) my Z last night removing it from the drawer next to my couch, fortunately not too far of a fall (on vinyl floor) though it did roll a bit. Splinter seems totally fine, nothing broken, but the batteries popped out of my RXG3D mod as it also rolled into a little dust (thankfully it seems Z avoided that). Despite being a bit uneven with some gaps, the mod seems to be working totally fine, looser battery door maybe. So all in all very lucky, probably would like to replace the mod some day, but since it is working normally there is no rush. I mean I'd also love a new pristine Custom Z (and even a ZV2) of course even though my Canary Z is still pretty new and working great! I suffer from such RAS (RBT VAS)
 
TiSteamo

TiSteamo

VAPEnsiero... sull'ali dorate...
Question for all Splinter Z owners:
Is the cooling mouthpiece really necessary?

I would like to take the XLR8 ...
 
TiSteamo,
nachooo

nachooo

Well-Known Member
TiSteamo said:
Question for all Splinter Z owners:
Is the cooling mouthpiece really necessary?

I would like to take the XLR8 ...
Click to expand...
Also depends your way of vaping ..if you want to extract all in a few, hard, big hits..better use a cooling device. Preferible temperature of vaping plays a role also. If you vape slowly, low temps for flavour and you cool the vap in the mouth as opossed to a direct lung hit...you can avoid cooling devices
 
Summer

Summer

Long Island, NY
nachooo said:
If you vape slowly, low temps for flavour and you cool the vap in the mouth as opossed to a direct lung hit...you can avoid cooling devices
Click to expand...

This 2nd part is not true for me. I vape low & finish up between 390 - 410 F° (a step climbing microdoser here. :leaf:) & the regular stem still burns me out. But I will admit that the Z is meant for lung pulls. It certainly isn't a vc with lame mouth pulling. :whoa: (Ha, 1st time in almost 2 years I found a reason to use this emoji. :lol: :spliff:)

I say, if you can afford to, get the xl just to have it. If you are gonna use it outside & need a little more stealth, then also get the shorty. I don't think anyone will regret the purchase.
 
Last edited:
K

KRnoS

Well-Known Member
Vgoodiez got their sale up and I picked one up (also couldn't resist and picked up a MPL Stempod SI since it was 20% off as well at the official site). Picked the Z over the regular splinter because it can't hurt if it's stronger.

I'm actually rethinking my mod selection. Lots of (e-cig) threads hating on the Reuleaux RX GEN3 for the cheap quality. Anyone recommend any? And on a side question - if I install custom firmware, is it still suitable for nicotine consumption?

Thanks in advance all!
 
Last edited:
Summer

Summer

Long Island, NY
Don't know about the nicotine part, but in my research I came up with these mods I liked for myevic firmware, all wismec:
  1. Sinuous P80 - 1 battery
  2. Reauluex RX Gen3 Dual - 2 batts
  3. Reauluex RX 200s - 3 batts (The 200 is also worth a look.)
  4. Reauluex RX Gen3 -- 4 batts. *Be aware that there's been a problem for a few members with 1 batttery depleting rapidly. Bad batch or inherent/ongoing issue? Who knows.
I did go to my 2 favorite youtube mod reviewers in order to formulate my list.

And I fully expect @bossman to weigh in with praise for the virtues of a dna mod. :myday: :cool:


VGoodiez started their 420 sale today & the RBT Collection is 15%-off. Code RBT420.

All purchases of RBT units (Milaana, Splinter or Splinter Z) will be eligible for a drawing to win the following:

-Milaana 2 with beta wooden mouthpiece

-Splinter Z with beta wooden mouthpiece

- Splinter V2 with beta wooden mouthpiece.

*3 vapes, 3 winners!

Winners will be drawn at a future date on IG Live. Order numbers will be used and a random number generator will select the winners.

*Quantities of above vapes are limited! So get them while supplies last!
 
Last edited:
bossman

bossman

Gentleman Of Leisure
KRnoS said:
Vgoodiez got their sale up and I picked one up (also couldn't resist and picked up a MPL Stempod SI since it was 20% off as well at the official site). Picked the Z over the regular splinter because it can't hurt if it's stronger.

I'm actually rethinking my mod selection. Lots of (e-cig) threads hating on the Reuleaux RX GEN3 for the cheap quality. Anyone recommend any? And on a side question - if I install custom firmware, is it still suitable for nicotine consumption?

Thanks in advance all!
Click to expand...

Summer said:
And I fully expect @bossman to weigh in with praise for the virtues of a dna mod. :myday: :cool:
Click to expand...
Too fucking right @Summer. =)

The Z is the best and all Splinters heat more evenly with a DNA or DNAc mod.

For a standard TC mod that runs the firmware we like I recommend the wismec rx gen3 dual. For a dna I like the hcigar VT75D but you typically have to find it from a slow China seller.
 
ataxian

ataxian

PALE BLUE DOT
bossman said:
Too fucking right @Summer. =)

The Z is the best and all Splinters heat more evenly with a DNA or DNAc mod.

For a standard TC mod that runs the firmware we like I recommend the wismec rx gen3 dual. For a dna I like the hcigar VT75D but you typically have to find it from a slow China seller.
Click to expand...
I use a 200 watt mod however I forgot what company made it?
$30.00 I paid 4 it? ( it work’s fine?)

When da batteries R fresh 20 watts or so?
Weakness 40 watts or so?
 
Shit Snacks

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
ataxian said:
I use a 200 watt mod however I forgot what company made it?
$30.00 I paid 4 it? ( it work’s fine?)

When da batteries R fresh 20 watts or so?
Weakness 40 watts or so?
Click to expand...

Yeah and what's great about the Splinter is that any mod will work, just use straight power mode with watts as intended and it is a wonderful experience. Some might even say Splinter is the holy grail for our holy grail ;):brow:
 
bossman

bossman

Gentleman Of Leisure
ataxian said:
How much R they?

I use some $20 wax pen?

$30 1/2 gram
$40 1 gram
ROSIN is my favorite these daz’s!
Click to expand...

Don't forget it's for dry herb, my man!

Your question made it sound like you were thinking it was a concentrates atomizer but I trust you know it's for flower.

And if you've been chiming in all this time and haven't gotten a Splinter yet, imagine I'm Tim Blake Nelson in Oh Brother saying "Come on in boys! The water's fine."
 
ataxian

ataxian

PALE BLUE DOT
bossman said:
Don't forget it's for dry herb, my man!

Your question made it sound like you were thinking it was a concentrates atomizer but I trust you know it's for flower.

And if you've been chiming in all this time and haven't gotten a Splinter yet, imagine I'm Tim Blake Nelson in Oh Brother saying "Come on in boys! The water's fine."
Click to expand...
I never hear of a SLINGER before?

It’s 4 herb?

I want one!
Just had a couple of hit’s PINEAPPLE ESPRESS.
Talk about fucked up?

The TASTE was very much like PINEAPPLE?
EFFECT beyond CIVILIZATION
Way 2 FROSTY?
 
Last edited:
Shit Snacks

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
ataxian said:
I never hear of a SLINGER before?

It’s 4 herb?

I want one!
Just had a couple of hit’s PINEAPPLE ESPRESS.
Talk about fucked up?

The TASTE was very much like PINEAPPLE?
EFFECT beyond CIVILIZATION
Way 2 FROSTY?
Click to expand...

Haha you know Splinter! Can get V1 for under $80 from vgoodiez right now, the Zion version is $50 more I think, 420 sale! Need the bigger mod, won't work in tiny oil pen battery (I don't think!)
 
Status
Not open for further replies.
Top Bottom