Silver Surfer Vaporizer
- Thread starter vtac
- Start date
Tweak
T\/\/34|<
Plus adjustable screen. You can now use even less with the Mini,
For my mini to be effective with the stock screen I had to put a good bit in there and it would effect the resistance of air. Now you can just a pinch.
afraid_to_poop
New Member
yeah, i have a mini-wand (works great for 1-2 people!). so excited, i love messing around with different configurations in the ssv, and having an adjustable screen is icing on the cake! do you need to modify the e-nano screens to fit in the mini? or does it just fit right in as is?
Raskin666
Doom Walrus
So I finally ordered some EQ basket screens to attempt Tweak's mod. After butchering one to the point that I had to throw it out, my second attempt worked (used an exacto). The good news is that it works incredibly. I sucked up just some dust and tiny pieces sitting in my grinder and got thoroughly medicated in about one hit. Highly recommend. I also tried putting a basket screen in the LSV transfer wand but couldn't get it in.
ImAdante
Member
Hey guys, new to the forums here.
I've had a PnP as my first vape for a good while now and I've been looking for a good nightstand piece and the SS, out of all the plugins I've seen is my favorite model. Looking to purchase this in the next month or so, does anyone recommend where I can get the best/reliable deal on one?
I've had a PnP as my first vape for a good while now and I've been looking for a good nightstand piece and the SS, out of all the plugins I've seen is my favorite model. Looking to purchase this in the next month or so, does anyone recommend where I can get the best/reliable deal on one?
Breathemetal
Well-Known Member
Direct from 7th Floor
Burn
Well-Known Member
The Underdog website has the same type screens, but not sure how big they are.
You do have a VB Mini wand correct?
Unfortunately no, you could probably stretch one out to fit but that wouldn't hold very well.
There is a pretty big difference in bowl size between the two.
I have 1/4" ID X 3/8" OD piece of tubing on the Mini VB, and a 3/8" ID X 1/2" OD on the Standard. The combo is awesome!!! I recommend all users get this setup,. No more messing with putting a screen in the middle of the VB mini.
Edit:
100% crop from above image ^^
The nano screen just falls right through the standard.
Just wanted to add that the underdog formed screens fit for the mini wand. it seems the diameter matches the underdog gongs. been using it like that for the past week at 12:30-1 on the dial w/quick pulls. works great. smaller loads, easier to keep clean, same big clouds, fantastic taste. thanks for the mod!
I got mine from eBay for around $200 (and it seems that's what most head shops will do it for - around $180+ and you can get a grinder with it) but if you order directly from 7th floor for $260 (I believe?) you get the 3 year warranty. :]
I've had issues unfortunately (could turn up my unit to 4-5 and do a slow draw and my herb wouldn't change color - yeah right!) with my first unit but I'm swapping it out and the replacement should be here in the next few days!!
Last edited:
ImAdante
Member
I got mine from eBay for around $200 (and it seems that's what most head shops will do it for - around $180+ and you can get a grinder with it) but if you order directly from 7th floor for $260 (I believe?) you get the 3 year warranty. :]
I've had issues unfortunately (could turn up my unit to 4-5 and do a slow draw and my herb wouldn't change color - yeah right!) with my first unit but I'm swapping it out and the replacement should be here in the next few days!!
I went ahead and got it from 7th just incase I have any issues. Thanks, bro.
Now I play the waiting game
PoisonousHydra
Well-Known Member
I cannot seem to find any mention of whether or not the VaporBrothers Mini Wand is compatible with Da Buddha. I am guessing that it would not sit snugly, unless I swap out my heater cover. Please enlighten me
.
Burn
Well-Known Member
I cannot seem to find any mention of whether or not the VaporBrothers Mini Wand is compatible with Da Buddha. I am guessing that it would not sit snugly, unless I swap out my heater cover. Please enlighten me
yeah, mini wand is for the standard heater cover.
Vitolo
Vaporist
But if using a standard HC, the @vaporbrothers mini wand is great.
Anyone I know that tries one can not live without it.... for when they wish to do very small very controlled loads.
Anyone I know that tries one can not live without it.... for when they wish to do very small very controlled loads.
Tweak
T\/\/34|<
I cannot seem to find any mention of whether or not the VaporBrothers Mini Wand is compatible with Da Buddha. I am guessing that it would not sit snugly, unless I swap out my heater cover. Please enlighten me
That is correct. Swap out the heater cover. 7th floor states they make the standard HC for the DBV.
grokit
well-worn member
When I went to the underdog site they have two screen sizes, basically the choices are to fit a GonG or a NonG. Which size fits in the vapor brothers mini wand?
http://underdogvapes.com/formed-screens
Last edited:
SunnyHours
Well-Known Member
Just received my SSV...it's beautiful, but I think the knob is the blemish...can still see the knob because the glass is too short...I can always get a new one but, since it's kinda hidden behind, I don't really mind...
Works flawlessly, although the tubing tastes quite disgusting...will the taste ever leave? It got better already but still discernible ...
Works flawlessly, although the tubing tastes quite disgusting...will the taste ever leave? It got better already but still discernible ...
hoptimum
Well-Known Member
Vitolo has a whip cleaning vid on here somewhere but I'm too lazy to look. That might help.
Vitolo
Vaporist
Oldie but goodie...
http://fuckcombustion.com/threads/silver-surfer-vaporizer.2/page-99#post-4484
http://fuckcombustion.com/threads/silver-surfer-vaporizer.2/page-99#post-4484
Raskin666
Doom Walrus
Did you let the unit run for a while on max before using? That is one possible source of the taste. The tubing shouldn't leave much of a taste. I would say barely noticeable, if any, especially if using 7th Floor's tubes (the only ones I have experienced)
SunnyHours
Well-Known Member
It is all 7th Floor Tubing...the "original" one, clear tasted weird outta box...tastes like melted plastic and smelled like so too...
The lime colored 10' I ordered doesn't seem to smell strong like that...haven't tried it yet.
Here's a pic or 2 of her
Cheers guys...I'm a go and vape the pain away...
The lime colored 10' I ordered doesn't seem to smell strong like that...haven't tried it yet.
Here's a pic or 2 of her
Cheers guys...I'm a go and vape the pain away...
Last edited:
Hi Everybody,
I live in Europe and I have trouble to find the water adapter for SSV (http://silversurfervap.com/glass/wcfm/ground-glass-water-pipe-adapter.html#)
Did anybody already tried to use the ones designed for the EQ or for the vapor Daddy ?
http://arizer.com/store/en/arizer-parts/26-glass-elbow-adapter.html
http://vapordaddy.com/collections/test/products/tv-w117
The second one looks pretty similar to the 7th floor original one but I'm afraid that the tubing of the SSV is maybe too large.
Thanks for your help !
I live in Europe and I have trouble to find the water adapter for SSV (http://silversurfervap.com/glass/wcfm/ground-glass-water-pipe-adapter.html#)
Did anybody already tried to use the ones designed for the EQ or for the vapor Daddy ?
http://arizer.com/store/en/arizer-parts/26-glass-elbow-adapter.html
http://vapordaddy.com/collections/test/products/tv-w117
The second one looks pretty similar to the 7th floor original one but I'm afraid that the tubing of the SSV is maybe too large.
Thanks for your help !
SunnyHours
Well-Known Member
Thanks SunnyHours. I'll maybe wait to see if anybody else has some input.
To answer your question, the original one isn't so easy to find in Europe as the SSV isn't sold anymore here because of a certification issue.
If any european person knows where I can find this little adapter, feel free to share