jbm
Well-Known Member
Which is where you come in.
Discontinued RBT Splinter (All Versions)
- Thread starter RastaBuddhaTao
- Start date
KeroZen
Chronic vapaholic
Let's not forget that the beauty of RBT heaters is their inertia and the fact they work pretty well in power mode (or voltage regulation in the Zion)
For TC mode a tiny coil or two like for instance in the Imp/Impcognito works pretty well, but when you try to use it in power mode it becomes super finicky and can glow quickly. It was to some extent the case with the MistVape Touch compared to the Milaana. The former had a much lighter mass heater and required (at least for me) much more button feathering.
So yeah, the fact RBT heaters work very well in power mode coupled with the hassle and complexity of setting TC profiles (or even TFR curves etc) and installing custom geek firmware are surely the reasons why Ryan did not bother too much. The things just rip and hit pretty hard, mission accomplished. The KISS principle at its best.
For TC mode a tiny coil or two like for instance in the Imp/Impcognito works pretty well, but when you try to use it in power mode it becomes super finicky and can glow quickly. It was to some extent the case with the MistVape Touch compared to the Milaana. The former had a much lighter mass heater and required (at least for me) much more button feathering.
So yeah, the fact RBT heaters work very well in power mode coupled with the hassle and complexity of setting TC profiles (or even TFR curves etc) and installing custom geek firmware are surely the reasons why Ryan did not bother too much. The things just rip and hit pretty hard, mission accomplished. The KISS principle at its best.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah that's not necessarily true at all, more so about using cruise if anything, he says wattage for the simplicity basically. As long as you limit your max wattage appropriately, it does not matter whether TCR or power mode for the longevity of anything... In fact pushing the max wattage can also be quite forgivable too, depending how you use it...
ChilledAsian
Well-Known Member
Splinter V2 is amazing on tubo! Thanks for guiding @GoldenBud!
Notacaveman
Well-Known Member
Hey guys I love my splinter z, I've gone through three different mods with it though, two wismec gen 3's and a fuchai glow. All three broke, the fuchai pretty much exploded when I was trying to install custom firmware and put the batteries into the unit whilst it was plugged into my laptop, my laptop completely cut out and I couldn't get wifi to work on it for ages hahaha, the glow started throwing sparks and the LEDs got bright as hell. One of the wismecs just died on me and I dropped the other 
On all three mods I was trying to set up TCR but now I pretty much gave up on TCR and I'm running it in wattage on a tac-21 mod just because I think they look so pretty together.
Well now I'm thinking I want to run it in TCR but get it dialled in properly this time, I want to get maximum performance out of this thing and I've heard it's a different experience entirely when it is. I'm having such a good time in wattage mode however I'm just not sure it's worth going through the trouble, is it really that much better in TCR? What would be the best/easiest setup for TCR on this thing?
On all three mods I was trying to set up TCR but now I pretty much gave up on TCR and I'm running it in wattage on a tac-21 mod just because I think they look so pretty together.
Well now I'm thinking I want to run it in TCR but get it dialled in properly this time, I want to get maximum performance out of this thing and I've heard it's a different experience entirely when it is. I'm having such a good time in wattage mode however I'm just not sure it's worth going through the trouble, is it really that much better in TCR? What would be the best/easiest setup for TCR on this thing?
bossman
Gentleman Of Leisure
Sorry to hear about your ordeal. The best Splinter and Splinter Z mods are the Joyetech Espion and the Wismec Ravage230, the only two mods that run Red Panda. You need access to a Windows computer to install Red Panda. You can pm me your email address when you get the mod and I'll send you a config file to import for easy setup, although it's just a few settings: TCR 120 to 145, max watts 50, and just accept the cold unlocked resistance which you should never have to set or adjust.
I found all my Red Panda mods from deal links on cheapvaping.deals but they don't have a current deal for either mod right now:
You searched for Espion - Cheap Vaping Deals
cheapvaping.deals
I think mine mostly came from vapesourcing and I've had good results with US and Chinese warehouse shipping but the new vape shipping ban could change that.
Joyetech ESPION Kit 200W With ProCore X Tank | Vapesourcing
Joyetech Espion Kit with ProCore X Tank is furnished with a 1.45 inch large TFT color display and user-friendly interface, max output can up to 200W, buy it with big discount in vapesourcing.
Last edited:
Notacaveman
Well-Known Member
Thank you bossman, that's really kind of you! I'll have a look around online tonight and see which of those mods are available in the UK, this will be my 5th and hopefully last mod I buy for the splinter but she's more than worth it.Sorry to hear about your ordeal. The best Splinter and Splinter Z mods are the Joyetech Espion and the Wismec Ravage230, the only two mods that run Red Panda. You need access to a Windows computer to install Red Panda. You can pm me your email address when you get the mod and I'll send you a config file to import for easy setup, although it's just a few settings: TCR 120 to 145, max watts 50, and just accept the cold unlocked resistance which you should never have to set or adjust.
I found all my Red Panda mods from deal links on cheapvaping.deals but they don't have a current deal for either mod right now:
You searched for Espion - Cheap Vaping Deals
I think mine mostly came from vapesourcing and I've had good results with US and Chinese warehouse shipping but the new vape shipping ban could change that.
Joyetech ESPION Kit 200W With ProCore X Tank | Vapesourcing
Joyetech Espion Kit with ProCore X Tank is furnished with a 1.45 inch large TFT color display and user-friendly interface, max output can up to 200W, buy it with big discount in vapesourcing.vapesourcing.com
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Sorry to hear about your ordeal. The best Splinter and Splinter Z mods are the Joyetech Espion and the Wismec Ravage230, the only two mods that run Red Panda. You need access to a Windows computer to install Red Panda. You can pm me your email address when you get the mod and I'll send you a config file to import for easy setup, although it's just a few settings: TCR 120 to 145, max watts 50, and just accept the cold unlocked resistance which you should never have to set or adjust.
I found all my Red Panda mods from deal links on cheapvaping.deals but they don't have a current deal for either mod right now:
You searched for Espion - Cheap Vaping Deals
I think mine mostly came from vapesourcing and I've had good results with US and Chinese warehouse shipping but the new vape shipping ban could change that.
Joyetech ESPION Kit 200W With ProCore X Tank | Vapesourcing
Joyetech Espion Kit with ProCore X Tank is furnished with a 1.45 inch large TFT color display and user-friendly interface, max output can up to 200W, buy it with big discount in vapesourcing.
View attachment 6368
Just wanted to add, for the Splinter Z, the TCR value should be 160 in my experience (125 for regular Splinter) and I actually do lock the resistance now though I didn't at first... I posted recently if you go back a few pages, describing my whole process for setting up two different splinter z's recently with red panda on ravage and espion...
Also if for some reason you cannot find those two mods anymore anywhere, at least find one that is compatible with Arctic Fox, similar to Red Panda (that is what I used to set up my regular Splinter on a P80 with good temp control, but you probably want dual battery mod for the Z....)
Last edited:
GoldenBud
Well-Known Member
I am looking to buy any Red Panda / Arctic Fox with good Splinter V2 settings capable. i will configure everything alone,
the problem is Wismec P80 is out of stock everywhere and so is Ravage230
will Eleaf iStick T80 will be fine? or S80
out of all site vapesourcing.com what would you recommend ?
the problem is Wismec P80 is out of stock everywhere and so is Ravage230
will Eleaf iStick T80 will be fine? or S80
out of all site vapesourcing.com what would you recommend ?
bossman
Gentleman Of Leisure
Wismec Reuleaux RX GEN3 Dual 230W TC Box Mod
Check out this cheap deal for Wismec Reuleaux RX GEN3 230W Dual Box Mod Kit . Use discount coupon codes to get the best price and receive free shipping.
cheapvaping.deals
Arctic Fox runs great on the RX Gen3 Dual and the size is an even better fit for the V2 with twice the battery life of the P80
GoldenBud
Well-Known Member
Excellent. Purchased.Wismec Reuleaux RX GEN3 Dual 230W TC Box Mod
Check out this cheap deal for Wismec Reuleaux RX GEN3 230W Dual Box Mod Kit . Use discount coupon codes to get the best price and receive free shipping.
Arctic Fox runs great on the RX Gen3 Dual and the size is an even better fit for the V2 with twice the battery life of the P80
androponic
vaped.
@GoldenBud here are some Ravage 230 in a kit available at vapesourcing
https://vapesourcing.com/wismec-sinuous-ravage230-with-gnome-evo-full-kit.html
https://vapesourcing.com/wismec-sinuous-ravage230-with-gnome-evo-full-kit.html
GoldenBud
Well-Known Member
It's too expensive... and I prefer the GEN3 Dual with tubomyevic other than Red Panda/Arctic Fox (just because I'm more experienced with the tubomyevic)
or maybe it feels too expensive because last time I payed 40$ included shipping hmmm
but thanks anyway!
androponic
vaped.
reach out to @Unklmark68 he has parts and all of the info and also does repairs too. he is actually the official RBT repair service too.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Is that a color DNA? That software is so tedious, Arctic Fox and Red Panda is much better for me... Plus auto fire options!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yes, 75 watt color DNA.
Yeah that's the chip I have in the dovpo mono square too, I hate how you can't just simply adjust the temperature up or down, it requires extra clicks to do so... My iHeat lives there (I do still have purpleheart Z on the bronze RX DNA 250 too, neither have been used in almost a year now though lol)
