Life Saber (LSV) by Elev8 Vehicles

[Deadshort480]

Apparently, I do not have permission to view that page.

The page you requested cannot be displayed right now. It may be temporarily unavailable, the link you clicked on may be broken or expired, or you may not have permission to view this page.

 

[Vitolo]

Glad you made a vid.
Post the youtube link here when you're done, so we can all check it out!

 

[keepsake]

Got the youtube link up ^

 

[lwien]

I noticed in this vid that you have the WPA attached to the LSV by screwing on the end cap over it. I wonder how many people do this and what are the advantages of doing it this way. I've never done that before.

 

[keepsake]

I noticed in this vid that you have the WPA attached to the LSV by screwing on the end cap over it. I wonder how many people do this and what are the advantages of doing it this way. I've never done that before.

It's so I dont have to put the LSV down to pick up the WPA to clear.
I can just lift up and clear.
One less step for me to do

 

[Vitolo]

Give it a try, lwien.
There was slightly less range of motion.
I am a between hit stirrer, so it did not suit me.
Nice vid, keepsake~

 

[lwien]

Yeah, I stir between hits as well..........

I also don't put the LSV down to clear. I just hold the LSV in one hand and use the other to lift the WPA to clear.

 

[keepsake]

I like to stir too but having to put the LSV down so I can pick up the WPA is too much effort for me when I'm trying to clear the glass. So I just flick the WPA after every hit and it does a good job of mixing up the herb. I only put 0.1-0.2 grams in there so it's very loose. I guess having the WPA connected to the LSV would cook the herb a little bit but I take back to back hits and after about 5-6 hits I dump the bowl into my ABV jar anyways. A session is pretty quick for me... and I get medicated beyond belief hahaha. The LSV delivers some serious vapor.

I cant wait til I receive my EFS bubbler. It's smaller than this Apix tube so I'm sure it's gonna milk much thicker. My lungs aren't strong enough to milk this Apix tube the way it should be.

 

[justcametomind]

I was able to see it a first time but now I get the same message of the post above mine.
Pretty big clouds anyway!

 

[Frederick McGuire]

Well, I broke my favourite WPA yesterday
Bye-bye mr 18mm shorty

Are there any 7th floor discount codes I could use when purchasing another one (and a backup)?

 

[Deadshort480]

Man, that's a bummer. I broke mine about a week ago. It was still useable, but I needed one that was fully intact. It can serve as a backup now. I too looked for a discount code, but couldn't find one.

 

[Frederick McGuire]

Haha, at least yours was useable, my spherical joint snapped off (pretty cleanly actually), and my male joint snapped off and broke into about 6 pieces.
It dropped onto a tile floor from about 1 metre.
I've still got 2 14mm ones as backup though
And 2 other MacGuyver-esque WPAs that use male joints

 

[Trickfire]

Yo whats up people. I wanted to chime in on the thread, My previous setup was a silver surfer: ground glass--wand----tube----then tubing straight into a slide. (I vape strictly through h20 since I have had this setup). Nothing spectacular as far as pipes go but it worked perfect and turned me strictly to vaporizing through water. Well I decided that I wanted to go to the light saber due to its design to allow for more adequate "vapor-bonging" options. For whatever reason, I do not like to purchase things online AT ALL and in the area I live its an hour+ drive for me to get to a retail store but I still get a choice of a bunch of high qaulity competiive shops with knowledgeable people. So I started to call around and luckily one of the places had just got there first shipment in store (area culturally emerging, which is great) and had every color at msrp $. I drove out, already knowing I was going to buy the unit; but I had also had assumed that the shop had been smart enough to realize that anyone buying one would be using it for water attachments. I thought that even if they had n't ordered the official ones from 7th floor, they would have something I could use in the mean time (attatchment wise), plus they blow glass in store and do specialty orders, therefore I thought one way or the other I could get something to work even temporary, Im Impatient lol. Unfortunately they had nothing that would work and the lady knew her shit about everything except this lol. Well, being as I go out there frequently I just decided to order 2 of the short lsv water pipe adapters one 14", and one 18" through the retail shop. . Well that was 2 months ago..... I have called every 10 days; she said she does not know what happened to them, but Im positive the very next person that bought a light saber from them got mine grrrr. Finally through frustration (partly my own fault too, being stubborn about not just ordering the piece myself). I started making calls because I am the "decide i want it, have to have it right then" guy, I found another local that was real smart, and he had more oil/ concentrate rig equip than I have ever seen! He had probably 10 different similar to these, he said they were for dab equip. So I'm guessing thats what these pieces are made for.....

Either way it works perfect as an adapter for right now and I am placing my order for the 7th floor ones asap. This is my first time trying it out through my new swagger beaker bottom.

Needless to say, Im walking on sunshine

 

[deadheadbill]

I noticed in this vid that you have the WPA attached to the LSV by screwing on the end cap over it. I wonder how many people do this and what are the advantages of doing it this way. I've never done that before.

That is the same way I use mine. For me, it's easier to clear, less chance of dropping wpa and I don't stir till the end so no big deal there.

 

[Trickfire]

Hey guys, I feel stupid for asking this, but I swear in the past I had the ability to edit my messages/threads. I need to reset the image codes for my above post ^^^^^^, but I'm just going to repost it. I wanted to know for the future, if there is an ability to edit the msg after it has already been posted to the thread?

 

[Frederick McGuire]

You get 6 hours to edit your post, then it's locked down for eternity

 

[t-dub]

You get 6 hours to edit your post, then it's locked down for eternity

I think it is possible for the mods to grant "Edit" privileges on a case by case basis. If you use the "Report" button and in the comments section request the edit and explain your reason, it may be granted.

 

[peterchen]

Hi guys, my wpa broke and I wonder if any of you know a shop to get just the wpa in europe? Thanks a lot in advance!

 

[vorrange]

Hi guys, my wpa broke and I wonder if any of you know a shop to get just the wpa in europe? Thanks a lot in advance!

try lacentralevapeur.com

 

[peterchen]

try lacentralevapeur.com

Thanks man, that's what I needed.

 

[ataxian]

here you go



sure sounds like a shot to me. plus he called it plastic when it is in fact an aluminum housing.

my favorite part of this thread is how they claim that it costs less to drill the holes by hand, than it does to have it machined. oh and that the machined version wouldnt be of as good quality... CNC machines whether they are laser or not will drill the perfect holes in the perfect spot if programmed correctly. as for the price there will be a "programming" or "set-up" fee that you have to pay the machinist to program his machine for your specific piece. that price is usually pretty expensive, but you only pay it once. after its programmed they can store that info for use the next time its needed. so those aluminum tubes with holes will be much cheaper to make then doing each hole by hand... sheesh. that doesnt even make any sense. and not only will they be cheaper to make, each one would be almost identical to each other. drilling them by hand will cause each and every one to be a little different (which is ok), but to say that machining them produces a lower quality is just not true.

i mean this is exactly what machines like CNC machines are for. easier and cheaper!

Having owned a CNC machine for over 8 years and using several CAD programs along with owning my own factory I have to say:

Their Statement:

"That by hand is cheaper or better than machine"!

It shows a lack of education or maybe misinformed?

 

[2clicker]

Having owned a CNC machine for over 8 years and using several CAD programs along with owning my own factory I have to say:

Their Statement:

"That by hand is cheaper or better than machine"!

It shows a lack of education or maybe misinformed?

haha... that was a while back

people really love their LSVs, but they are too expensive IMO. a hakko modded vape gives he same performance at less than half the cost.

 

[ataxian]

haha... that was a while back

people really love their LSVs, but they are too expensive IMO. a hakko modded vape gives he same performance at less than half the cost.

I was going to get one however having water path set ups are taking up my vaporizing device funds.
I'm a surfer and there is comments about Hand shaped and machined shaped in our circles.
Machine shapes are much more actuate than us humans!
It is a good all around vape the LSV and the SSV regardless of their comments.

I just find some of their claims kind of silly!

 

[deadheadbill]

haha... that was a while back

people really love their LSVs, but they are too expensive IMO. a hakko modded vape gives he same performance at less than half the cost.

I don't see 180$ for an LSV as overpriced at all? It is worth every penny.

 

[lwien]

I agree. It was overpriced when it first came on the market at 300 bucks, but now................to me, it's a bargain.