Ispire Wand, enail&vaporizer

LesPlenty

Well-Known Member
Company Rep
Got my Ispire today from Sourcemore...that was quick.
I am not sure what is going on with my version as it has the flower/concentrate switch like the early version but the min temp is 250f?
1625033933760.jpg
Seems like the latest firmware (V00.15) so maybe an old unit that was updated?
1625034446575.jpg
So there may be a way for early adopters to get the new lower starting temps.
Edit, my unit came with 1x flower cup and 1x concentrate cup so now I have 3x flower cups and only 1x oil cup ffs.
 
Last edited:

Bologna

(zombie) Woof.
Got my Ispire today from Sourcemore...that was quick.
I am not sure what is going on with my version as it has the flower/concentrate switch like the early version but the min temp is 250f?
View attachment 9873
Seems like the latest firmware (V00.15) so maybe an old unit that was updated?
View attachment 9874
So there may be a way for early adopters to get the new lower starting temps.
Edit, my unit came with 1x flower cup and 1x concentrate cup so now I have 3x flower cups and only 1x oil cup ffs.
If mine doesn't come with one, buy an Oregon Blower dropdown of your choosing, have it delivered to me and I'll ship it to you in trade for a flower cup... problem(s) solved! (And if any Nigerian or Congolese landrace beans happen to fall in the box, oops...! :razz:)
 
Last edited:

LesPlenty

Well-Known Member
Company Rep
And Dr Dabber Budder Cutter does something similar with multiple tip options
I just liked the small form of the Puffco, the DrDabber unit is huge compared (and S/S not Ti or ceramic).
Puffco will not post to Oz the bastards.
@Bologna my latest version says on the box 1x bottomed and 1x bottomless cup. :rofl:
My new Wand also works great with a vapcap.
I just double-click on 650f to enter Auto Mode without the cap inserted, the unit will flash red to indicate a problem (nothing in the coil). I then slowly bring the Wand down onto the cap until the red flashing led in the coil changes color (orange in my case as that shows the unit is now heating in concentrate made). Once I heard the click I just remove the Wand and hit the stem until the cooldown click then slide the wand back on (it just flashes red until it detects an object again like the start)
I cleared the full VC in 2x click cycles with Ed's cigar stem...the second cycle was so thick I thought I combusted but ABV looked like I might get 1 more little puff...but not me, if it is opened I refill, fuck that stirring business!
Looks like a perfect roast for me,
1625050130513.jpg
I am sure a bong will help vape it faster...pretty bent from all this testing...good fun!
So far it works better than advertised for me.
Flower mode 1 worked a treat with my Capstone capsule, 2 long draws on the rattle can and finished..a bit darker roast,
1625039635093.jpg
1625039338639.jpg
 
Last edited:

ProfessionalHandJob

"A handjob is still a job, okay?"
I just liked the small form of the Puffco, the DrDabber unit is huge compared.
Puffco will not post to Oz the bastards.
@Bologna my latest version says on the box 1x bottomed and 1x bottomless cup. :rofl:
My new Wand also works great with a vapcap.
I just double-click on 650f to enter Auto Mode without the cap inserted, the unit will flash red to indicate a problem (nothing in the coil). I then slowly bring the Wand down onto the cap until the red flashing led in the coil changes color (orange in my case as that shows the unit is now heating in concentrate made). Once I heard the click I just remove the Wand and hit the stem until the cooldown click then slide the wand back on (it just flashes red until it detects an object again like the start)
I cleared the full VC in 2x click cycles with Ed's cigar stem...the second cycle was so thick I thought I combusted but ABV looked like I might get 1 more little puff...but not me, if it is opened I refill, fuck that stirring business!
Looks like a perfect roast for me,
View attachment 9875
I am sure a bong will help vape it faster...pretty bent from all this testing...good fun!
So far it works better than advertised for me.
Flower mode 1 worked a treat with my Capstone capsule, 2 long draws on the rattle can and finished..a bit darker roast,
View attachment 9876
View attachment 9877
Woah what are these capsules from?
 

LesPlenty

Well-Known Member
Company Rep
Woah what are these capsules from?
spm=a2g0s.9042311.0.0.410f4c4dyKMcBA
Comes with 2 styles of capsule, good little vape apart from the straw mouthpice that is now delivered with it...I replaced it with a VC 'M' body!...the caps,
1623639849032.jpg
The X-Max Ace concentrate pod fits nicely too, I will try it once the hemp fiber is totally soaked with rosin dabber residue (those annoying puddles add up),
1625053662682.jpg
Nearly there. :tup:

Edit...Capstone is here,
 
Last edited:

ProfessionalHandJob

"A handjob is still a job, okay?"
spm=a2g0s.9042311.0.0.410f4c4dyKMcBA
Comes with 2 styles of capsule, good little vape apart from the straw mouthpice that is now delivered with it...I replaced it with a VC 'M' body!...the caps,
View attachment 9878
The X-Max Ace concentrate pod fits nicely too, I will try it once the hemp fiber is totally soaked with rosin dabber residue (those annoying puddles add up),
View attachment 9879
Nearly there. :tup:
Damn, item comes up as can’t ship to US :-(
 

Bologna

(zombie) Woof.
Anyone try running a SB Hydro Maxx, either with just flower, or twaxin'-it with The Wand yet...? That's my current project...

Portable Induction Convection.... sound good? Is it even possible...? :science:
 
Last edited:

Improvaper

Well-Known Member
So, I now have in hand both a v.14 and v.15 unit to compare, and I have a few observations about the temperature settings. Long story short, they are indeed timing presets, and nothing more.

The V.14 that bottoms out at 450° takes about 35 seconds to run a cycle at that temp, getting an empty insert/banger to about 350° according to my iR thermometer.

The V.15 that bottoms out at 250° takes 22 seconds to get there, and the bowl is actually at ~250°

Subsequent heatups are not any faster. The timing is always the same, the bowl just gets hotter and hotter. There is no temperature detection happening at all.

For dynavaps, I can detect no timing differences throughout the temperature range of the device, so it doesn't increase "intensity" there, either.

So if you have a V.14 unit, don't sweat it. The "lower temps" might be handy for dry herb but no one is using this for that purpose. And if you are, just pull the wand off at 22s and you'll have the same experience as the v.15 at 250°.
 

Texus

Well-Known Member
Anyone try running a SB Hydro Maxx, either with just flower, or twaxin'-it with The Wand yet...? That's my current project...

Portable Induction Convection.... sound good? Is it even possible...? :science:
Haven't tried but can when back home for concentrate. No IH flower if not Dynavap until i hear that someone has figured that out. But Wand and Switch reports on non-DV flower generally aren't great.
 

Bologna

(zombie) Woof.
Haven't tried but can when back home for concentrate. No IH flower if not Dynavap until i hear that someone has figured that out. But Wand and Switch reports on non-DV flower generally aren't great.
Cool man, good luck...! I'm only on the early stages trying to get familiar with this thing and SB HM (had them both less than 48 hours)... and then got hung up trying it out normally with trates... ha! Early impression is this thing is fuckin awesome! No shit! Just the whole concept already works so well, I can only imagine where it will take us!

Live shot of "breakfast" in Dome-Home Shed #2 (57F now and still friggin' raining, been days...):
F984303F-4DF5-408A-B70F-800DAE9AF9D2.jpeg
I threw in a few 3mm ruby pearls with some Banana Bread live badder for fun and the Pi ball cap works well, too (stock is better tho)... So much fun! (Note the carb cap stands work great as "cup holders" and 4 prong jewelry tweezers are a must... :tup:)
 
Last edited:

Woodisgood

Well-Known Member
Haven't tried but can when back home for concentrate. No IH flower if not Dynavap until i hear that someone has figured that out. But Wand and Switch reports on non-DV flower generally aren't great.
If someone could hack a metal band around an elev8r, could that work?
 
Woodisgood,
  • Like
Reactions: Madri-Gal

Bologna

(zombie) Woof.
I find the VC too restrictive on a bong, even 2 at a time, better than 1 though and at least the Wand can heat 2 tips at once,
View attachment 10037
That's cuz you're using it wrong... 😜 Try a rather full, somewhat loose tamp in a Ti tip with a reg cap and a short glass, but long enough gong body to roll the tip up thru the wand easily.... you can even rest the top edge of the cap directly on (or up against, in and under) the extra glass lip on the top of the wand oven opening... I just crank the temp up to max (800) and roll away...you can effectively extract a full cap in one hit easily this way... and if you're not careful, and you heat it low enough on the stem, you can heat it to combust w/o so much as a peep from the cap... crazy!

But that's just one of dozens of dif ways I've already enjoyed using this thing...! Another, I like even more, is using the wand just like a reg old school bic lighter to light a bowl whilst sucking...! So awesome, you just ride the IH until you can't take anymore... all the while easily being able to keep from combusting... the only limit is how big/good/seasoned your lungs are...!
 
Last edited:
Top Bottom