Inductor - Desktop Induction Heater by Camouflet
- Thread starter Camouflet
- Start date
Hello everyone,
We recently added the Inductor Manual & User Guide to the website. The link to the Manual is located in the Inductor product description.
Link to the Inductor Manual - Click Here
Feel free to share any feedback, thanks!
We recently added the Inductor Manual & User Guide to the website. The link to the Manual is located in the Inductor product description.
Link to the Inductor Manual - Click Here
Feel free to share any feedback, thanks!
Pinball-Vapes
Member
The Inductor is the key to this product family. Definitely an experience I love having next to my office desk. More to come soon!
fropones
Well-Known Member
What's the setup in the bottom left? Looks like you still need an Convector XL
Pinball-Vapes
Member
It's a dab caddy I bought from a CBD / Headshop. I use it to keep my Vapvana Scoop for the Injector and some glass adaptors, as well as the Camouflet Banger. The XL I intend to purchase at a later date.What's the setup in the bottom left? Looks like you still need an Convector XL
Pinball-Vapes
Member
Here's my unboxing video for the Camouflet Inductor, Zooter, Banger, Injector, and Factory Seconds Convector Titanium with Quad Bore Ceramic insert.
Enjoy!
Enjoy!
Last edited:
NorthernHigh420
Member
The XL in the Matrix Bowl is the way with the Dynavap adapterhttps://www.instagram.com/reel/C-3vri_PoRm/?igsh=aGtoNWVyY3I1am9p
Hello everyone,
The New Factory Production Inductor Cable with professionally crimped connections and premium Black cable is now available at Camouflet.com!
Link - https://camouflet.com/products/inductor-cable
The New Factory Production Inductor Cable with professionally crimped connections and premium Black cable is now available at Camouflet.com!
Link - https://camouflet.com/products/inductor-cable
Hello Camo Squad,
Summer '24 has come to end and harvest season is upon us. To celebrate we're having an "End of Summer Special" this week only at Camouflet. If you've been waiting to pick up an Inductor now's the time. Order your Inductor today and get 2x free Camouflet Creations!
Select your 2x Creations on the Inductor product page from the following: Convector, Convector XL, Injector, Zooter and Banger.
Get your Inductor & Camouflet Creations in hand ready for trim day and let's get this party started!
Join us on our new Discord group, anytime at - https://discord.gg/GBb7vqkgvn
Summer '24 has come to end and harvest season is upon us. To celebrate we're having an "End of Summer Special" this week only at Camouflet. If you've been waiting to pick up an Inductor now's the time. Order your Inductor today and get 2x free Camouflet Creations!
Select your 2x Creations on the Inductor product page from the following: Convector, Convector XL, Injector, Zooter and Banger.
Get your Inductor & Camouflet Creations in hand ready for trim day and let's get this party started!
Join us on our new Discord group, anytime at - https://discord.gg/GBb7vqkgvn
Last edited:
someTooL
Well-Known Member
After much experimenting, I’d like to share my Inductor/Tornado settings.
First, this IS NOT THE ANVIL THERMOCORE LOL. The tornado heats up super fast, and continues to store this heat. I had way too many combustions at even the lowest setting waiting for a click (no fault of the fabulous Inductor BTW), before I just started counting. I got close waiting for a click, but normally it was super dark or combusted.
For results that almost match the forge (when it could be used
) here’s my method.
Power on mine is set to 21.0. I heat the atomizer for the 3 seconds, stop. Directly move heater head to the upper section of the oven and heat for another 7-8 seconds, stop. You should hear back to back clicks within a couple seconds after. This will give me two nice pulls. If I didn’t count well enough and it cools before I get a full second pull, I heat the upper section again for 2 seconds.
First, this IS NOT THE ANVIL THERMOCORE LOL. The tornado heats up super fast, and continues to store this heat. I had way too many combustions at even the lowest setting waiting for a click (no fault of the fabulous Inductor BTW), before I just started counting. I got close waiting for a click, but normally it was super dark or combusted.
For results that almost match the forge (when it could be used
) here’s my method.Power on mine is set to 21.0. I heat the atomizer for the 3 seconds, stop. Directly move heater head to the upper section of the oven and heat for another 7-8 seconds, stop. You should hear back to back clicks within a couple seconds after. This will give me two nice pulls. If I didn’t count well enough and it cools before I get a full second pull, I heat the upper section again for 2 seconds.
leanpubpackage
Well-Known Member
I’d be interested in the inductor tech if it weren’t so bulky.
Any plans on creating a battery-powered portable version?
Any plans on creating a battery-powered portable version?
coolbreeze
Well-Known Member
Thanks for this, can't wait to try it out.After much experimenting, I’d like to share my Inductor/Tornado settings.
First, this IS NOT THE ANVIL THERMOCORE LOL. The tornado heats up super fast, and continues to store this heat. I had way too many combustions at even the lowest setting waiting for a click (no fault of the fabulous Inductor BTW), before I just started counting. I got close waiting for a click, but normally it was super dark or combusted.
For results that almost match the forge (when it could be used
Power on mine is set to 21.0. I heat the atomizer for the 3 seconds, stop. Directly move heater head to the upper section of the oven and heat for another 7-8 seconds, stop. You should hear back to back clicks within a couple seconds after. This will give me two nice pulls. If I didn’t count well enough and it cools before I get a full second pull, I heat the upper section again for 2 seconds.
No good with vapman, to far from center, takes too long to heat...
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah I had a fantasy about being able to use it with my hot knot diamond skillet quartz bangers, which are what I like to use most frequently now, like if there was a metal sheath to put over them, so you could then heat it with the inductor and heat them up, remove the sheath for the dab...? Would need some proper tools and station though for the hot items hmm (still need to try the official banger bucket with mine though)
If you are able to change the laws of physics, then a portable battery powered version should be no problem
kokolokokolokon
Well-Known Member
25V and almost 20 seconds to do one heat extraction.
Half bowl with herb and hash.
Cheers
Ripstar
Well-Known Member
Nice! I just remembered I could try my TA3 with it too....
25V and almost 20 seconds to do one heat extraction.
Half bowl with herb and hash.
Cheers
kokolokokolokon
Well-Known Member
Testing the armored at 25V with hash!
I ordered the Inductor during the most recent sale and added the Zooter & Convector XL. I was super excited to try this device when I got it.
Unfortunately, after plugging it all in and getting ready to test it everything appeared to be working, but the moment I pressed the button and applied it to the Convector there was a high pitched noise and then the button on the Lighter Head went out and it started to smell of burning electronics.
I emailed Camouflet and after some testing they confirmed the Lighter Head has probably shorted out. The part that is disappointing is they aren't offering a replacement part and having me ship mine back in, they are requiring that I send in my broken Lighter Head first and they will refurbish the unit and send it back after repaired. This is a little disappointing to me as they claim they aren't able to exchange as some users took advantage, which is understandable but now I have a non functional device and will be on their timeline to get it up and going again. If I was apart of the beta this would be a whole different story and I would understand the lack of QC, but as I thought I was buying a finished product I'm frustrated.
When asked what would happen if the device shorted out again after the 30 day Warranty they said "If used properly and adhering to usage instructions, the Lighter Head will function fine for a longtime." But I know of at least on other user that had a unit short out after the 30 day period. Luckily they were willing to replace his unit for the price of shipping, but still seems like that would be a manufacturing issue and not fall under normal wear and tear.
Unfortunately, after plugging it all in and getting ready to test it everything appeared to be working, but the moment I pressed the button and applied it to the Convector there was a high pitched noise and then the button on the Lighter Head went out and it started to smell of burning electronics.
I emailed Camouflet and after some testing they confirmed the Lighter Head has probably shorted out. The part that is disappointing is they aren't offering a replacement part and having me ship mine back in, they are requiring that I send in my broken Lighter Head first and they will refurbish the unit and send it back after repaired. This is a little disappointing to me as they claim they aren't able to exchange as some users took advantage, which is understandable but now I have a non functional device and will be on their timeline to get it up and going again. If I was apart of the beta this would be a whole different story and I would understand the lack of QC, but as I thought I was buying a finished product I'm frustrated.
When asked what would happen if the device shorted out again after the 30 day Warranty they said "If used properly and adhering to usage instructions, the Lighter Head will function fine for a longtime." But I know of at least on other user that had a unit short out after the 30 day period. Luckily they were willing to replace his unit for the price of shipping, but still seems like that would be a manufacturing issue and not fall under normal wear and tear.