Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah $121 makes it actually less than potent or iaso... Though I could not tell what metal they used to make it out of, on their site??
Herb Grinders
- Thread starter vtac
- Start date
-
- Tags
- herb grinders
Yeah $121 makes it actually less than potent or iaso... Though I could not tell what metal they used to make it out of, on their site??
RustyOldNail
SEARCH for the treasure...
I tend to avoid products that have websites, but very little real information. Wish they would spend more resources on just listing the materials and facts, as opposed to fancy 3D animations. No info, no buy....
GoldenBud
Well-Known Member
i agree, also the magnets are not too big and spreaded over the marginal side of each part, saving more space inside the grinder itself...
i also saw in other website that it is the same aluminum which used in the Pucc grinder, forgot the exact material Aluminum 6063 or 6065...it's good enough but i agree @RustyOldNail i wouldn't buy any grinder without a decent review(s) about it ...
MegaMan2k
Well-Known Member
Anyone try this capu grinder?
Trusted Herb, Hash & Weed Grinder Online Store | CAPU
We are your one-stop shop selling high-quality, luxurious herb, hash, cannabis, & weed grinders online at reasonable prices. Worldwide shipping.capu.de
Goes a step further from having a swappable plate, it has swappable top teeth as well! So the whole thing can become stash without any teeth sections too...
Or this iaso steel grinder??
Three Piece Stainless Steel Grinder 2.5"
Get our large 3 piece herb grinder online. Top quality craftsmanship built to last a lifetime. Made in USA. Exceptional grip and comfort. Easy to clean and maintain.iasogoods.com
These are the same price as the potent grinder more or less? So who is going to jump in and test these... $140
I cant find anything on their website about which material its made from or which country its produced in.
I just send him a email to get anwsers to these questions...
Im in EU so germany would be good for me shipping-wise, if its made from stainless steel or titanium and made in germany or somewhere else in europe i would probably be willing to give it a shot ^^
PPN
Volute of Vapor
GoldenBud
Well-Known Member
most people which use 2 part grinders are the ones which weed is very easy for them to get, growers mostly, because they put all the grinded material on some plate, and it can be left for hours...... they don't care if the weed is not protected by some grinder because it's super cheap for them hehe
Vitolo
Vaporist
I agree.. that was something that bothered me (still does) about the OB-Gon grinder... too many animated images.
No. I do not place mist flowers in grinders.
I let them sit out until slightly dry.
If I do get any ground flowers sticking in grinder, I just run a sharp poking tool around in the grinder for a few seconds, and get it all out.
Sometimes I will use a small brush, like the mflb brush.
The problem is very rare for me, as I like dryer bud for vaping.
While I am very "low-income", (I receive $783 a month for my entire rent/living needs), I use a two piece grinder because I prefer the results.
Yes, I sure do leave my ground meds on an open "cookie tin lid", and use what I have ground for the morning from this open surface.
Some of us do not prepare, and use our meds this way due to wealth.
It is done by me and by others for:
- Convenience
- best texture and prep for our vaping preferences
- Having enough meds ready, and on hand to use immediately as symptoms appear and help is needed fat.
- Flavor and rapid effects of the meds volitized dry instead of moist.
- Having enough meds ready to last at least a few sessions, back to back.
Even the poorest of us do have specific preferences stemming from medication value, and us delivery availability.
Last edited:
So does a 3 piece without having to resort to a separate jar lid to store the ground material on, having to empty into another container is just an extra step I would not like.
Oh, and fuck 4 piece grinders, keif robbers...
Vitolo
Vaporist
I understand.
I store my ground bud right on the same tin that I empty the grinder on.. I clack the grinder halves together to remove the debris.
Business card folded in half the long way scares the herb together, and it gets played over the web, like a tent.
I use a jar if I'll be away from home for an extended time.. that's rare.
Agreed!
Weakens the potency of the herb you're using. There is a reward for later, but it's a trade-off.
Ramahs
Fucking Combustion (mostly) Since February 2017
Yeah, but I much prefer a 3-piece because I just scoop out of the grinder catch. It can sit in there, just like on @Vitolo 's tin, but that tin is just one more step, and one more way to lose keif.
Also, I have less control over the consistency of the herb with a 2-piece than I do with a 3-piece, which has holes that don't allow herb through till it's the right size.
Furthermore...I don't like grinding upside down in a grinder at all. If I feel the need to do that, then it means that I don't have the right grinder (or the right grinding plate) for my needs, and I'm just making my grinder dirtier than I should have to.
Also, I have less control over the consistency of the herb with a 2-piece than I do with a 3-piece, which has holes that don't allow herb through till it's the right size.
Furthermore...I don't like grinding upside down in a grinder at all. If I feel the need to do that, then it means that I don't have the right grinder (or the right grinding plate) for my needs, and I'm just making my grinder dirtier than I should have to.
RustyOldNail
SEARCH for the treasure...
Well said, that’s why I went with the BCG with all three plates. For me grinding with my old 2-piece SCS, it was a guessing game, open check, go again... opps too fine....
GoldenBud
Well-Known Member
yeah that's right, you never lose your kief. that's the best advantage of 2 piece grinder. i understand why people really like it!!
Ramahs
Fucking Combustion (mostly) Since February 2017
Same reason I've come to prefer a 3-piece. I like to keep my keif in the herb, not separate it.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I also like a three-piece for that reason, but because it does give me the ability to grind upside down if I do want a further level too. I love my BCG's and use them this way all the time, both my medium plate amethyst and fine plate aquamarine... Though that often requires poking and knocking together the top pieces to get any bits onto the table and then brush them into the dish with the rest... Flower Mill has been nice so far for a totally different experience, but I imagine I will end up using the United Machining Grinder like my Brilliant Cut Grinders once it arrives...
Moses Baca
Colorado State Reformatory #8755
@Shit Snacks - I'm looking forward to your thoughts and comparisons. I'm planning on getting a nice grinder next 4/20. Large BCG is the front runner for now but there are so many great options.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah I thought it would be the large BCG for me, but decided to see what steel was all about with the UM, then the FM popped up and felt unique enough to justify it as well!
RustyOldNail
SEARCH for the treasure...
I believe it might be time for a “snacks” Grinder INTERVENTION!!!
Hand over all your credit cards....
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I believe it might be time for a “snacks” Grinder INTERVENTION!!!
Hand over all your credit cards....
Truth is I probably should have at least sold my two SC shredders and my SLX already!
Vitolo
Vaporist
haha.. love that sentiment.Nooooooooooo!!! Don't sell your grinders
About 5 years ago I sold just shy 50 of my grinders in one sweep!
The pictures are photo bucket, so they no longer show the amazing pile.
Grinders Galore
The time has come for me to let go of a few items to help pay ongoing court costs and legal fees. Here is a deal that will be hard for a grinder fanatic to pass up. You see here 40+ grinders. They are all good grinders. Added extra is a few Iolite card Grinders, and an Herbalizer Card Grinder...
fuckcombustion.com
Looks like I am headed in that direction once again.
Speaking of grinders... the new Mill type grinders are the same functional principle used in the
credit card grinders... just like the verbalizer card grinder mentioned in that thread!
Edit:
I claim to dislike 4 piece grinders.... but I just looked back about ten years, and found myself praising this little guy:
SC mini scout is not bad at all!
Scout Grinder & Sifter With Integrated Storage
An ultra-compact grinder/sifter for when you need to travel light. Lifetime warranty when shipped from our global headquarters in San Clemente, CA. Made in the USA.spacecase.com
Last edited:
Ramahs
Fucking Combustion (mostly) Since February 2017
LoL. I get it. I like to collect grinders...but I doubt I have been doing it nearly as long as it took you to collect those 50...but I could see myself falling that far down the proverbial rabbit hole.
Yeah, I could not have just one grinder any more. I've spoiled myself.
Well, I could. Hell, I could get by without a grinder at all if I had to, but I would not go without a decent grinder by choice.
I am interested in the new mill grinders. Though I haven't manufactured the determination to bite the bullet on one yet. I'm rarely an early adopter, unless it's a beta tester I was sent, for lack of finances mostly.
Last edited:
whatitdew
Vapes R Great
For me the BCG is the best so far.
I have been testing the Herb Ripper, its nice but in the end the StainlessSteel is just too heavy for me in a full size grinder to pack around. And if it’s in a pack I’m always afraid it will damage other stuff since it’s so tough haha.
the BCG just has the right design, still haven’t cleaned any of my plates. Herb ripper is the same as most other grinders just in SS. Gets gummed up fairly quick.
I was onboard to try the rolei flower mill one, but then they outsourced to China so that was a deal breaker for me.
I have a drawer full of space cases and Santa Cruz shredder. If anybody needs a good grinder for cheap, I got you.
BCG makes them feel so cheap now compared...
I have been testing the Herb Ripper, its nice but in the end the StainlessSteel is just too heavy for me in a full size grinder to pack around. And if it’s in a pack I’m always afraid it will damage other stuff since it’s so tough haha.
the BCG just has the right design, still haven’t cleaned any of my plates. Herb ripper is the same as most other grinders just in SS. Gets gummed up fairly quick.
I was onboard to try the rolei flower mill one, but then they outsourced to China so that was a deal breaker for me.
I have a drawer full of space cases and Santa Cruz shredder. If anybody needs a good grinder for cheap, I got you.
BCG makes them feel so cheap now compared...
Still waiting on my BCG. But I do really like how my Flower Mill can be so easily converted back and forth between being a 3 and 4 piece grinder functionally with a screw in metal piece with screen that threads to internal threads on main body. Hope that makes sense....