django7
Well-Known Member
In my case it was a very short draw. It combusted right away. The material was very dry at that point, but still... It can happen.
Discontinued Haze Square
- Thread starter scottg402
- Start date
Volteric
Well-Known Member
Are these for aesthetic reasons? Can you comment as to why these might be a better solution?
They are not better. Just different option. Members here expressed interest in plain silver stainless pods instead of anodized current pods and we are bringing these as accessories. Cosmetically, it may look better. We will see how they perform first.
KLo
No Ember
...But I think the bowls should be individually accessible ... preferably from the outside of the device
Bowls in Square are individual when popped out (my preferred method of loading). Sounds good, your idea, but would have to be a different design..maybe different concept altogether. Here's one: swing-out arms that let you fill pod from the outside. While on the pipedream, how 'bout see-thru windows?! And one more...a fold-in mill style churn to stir up the goods
Yeah, i get through 4 pods on a single charge on lower temps @ 4-6 hits per. Tried higher temps and batt drains quicker, but still possible to get through. So many variables, techniques, levels of "lit"
YouTube monetizers just got slapped with strikes, removed content and the like. Too many boobs doing nose dabs opposed to educational and scientific vids has demised most related content. Still lots of ridiculous horseshittery on the Tube non-related to vaping/smoking; it's a conundrum when you put things into a free speech perspective
Still getting used to orientation, top-bottom...which is which? I tend to keep the lock portion on top so bowls/pods sit above the heater upright. "Button on Bottom" is my mantra
Get it PPN ! You like the ESV, yes? You will see familiar conjunction function with the Square (x4!)
I use a Space Case w/ its medium grind and have no issue. Just let that convection heat get in and around the herb. Too much tamp and it's an iffy, combustible situation no matter what the grind
The "prime" hit is the taste hit. Then again, the Square has several prime hits, not just the first. Flavour is everywhere w/ this one, no lie
I haven't rcvd mine back yet from Haze, but my seal was all crooked out-of-box. One wonders how well this seal will hold up over continued rotation switching from bowl to bowl. Personally, I plan on disengaging it from its other half when I need to rotate to avoid wear. Having a dynamic airpath is certainly part and parcel of its design, but wonder if a more active method (manually ejecting protruding nipple anyone) of closing the airpath will help with consistency. IMO any amount of unwanted air into the path caused by the seal changing shape will result in each unit (each rotation?) behaving differently.
Top & bottom pieces lift and seperate as they rotate, then fall back into place. Seals should be friction safe. Heat may wear them out before rotations do, imo
Sounds good. I take issue w/ silicone. The taste is a buzz kill
Let us know ! Looking forward to future goodies, especially micro pod and smelly proofing solutions, cases, etc
Last edited:
Volteric
Well-Known Member
Bowls in Square are individual when popped out (my preferred method of loading). Sounds good, your idea, but would have to be a different design..maybe different concept altogether. Here's one: swing-out arms that let you fill pod from the outside. While on the pipedream, how 'bout see-thru windows?! And one more...a fold-in mill style churn to stir up the goods
Yeah, i get through 4 pods on a single charge on lower temps @ 4-6 hits per. Tried higher temps and batt drains quicker, but still possible to get through. So many variables, techniques, levels of "lit"
YouTube monetizers just got slapped with strikes, removed content and the like. Too many boobs doing nose dabs opposed to educational and scientific vids has demised most related content. Still lots of ridiculous horseshittery on the Tube non-related to vaping/smoking; it's a conundrum when you put things into a free speech perspective
Still getting used to orientation, top-bottom...which is which? I tend to keep the lock portion on top so bowls/pods sit above the heater upright. "Button on Bottom" is my mantra
Get it PPN ! You like the ESV, yes? You will see familiar conjunction function with the Square (x4!)
I use a Space Case w/ its medium grind and have no issue. Just let that convection heat get in and around the herb. Too much tamp and it's an iffy, combustible situation no matter what the grind
The "prime" hit is the taste hit. Then again, the Square has several prime hits, not just the first. Flavour is everywhere w/ this one, no lie
Top & bottom pieces lift and seperate as they rotate, then fall back into place. Seals should be friction safe. Heat may wear them out before rotations do, imo
Sounds good. I take issue w/ silicone. The taste is a buzz kill
Let us know ! Looking forward to future goodies, especially micro pod and smelly proofing solutions, cases, etc
I'd really love to see "see thru" windows or various kinds and colors of tops/lids along with better-looking smell proof cases/sleeves.
Stdudez
Well-Known Member
Hey guys -
I am new to this forum and stumbled upon it after reading about and ultimately purchasing the Haze Square Pro. I am in on the second wave of preorders and am ecstatic to get the new device!
Up until now I've been using the original Pax which recently greatly degraded in battery life and prompted me to consider other alternatives. I literally got my Pax when it first came out so I was largely unaware of the new technology out there in the vaping world. After reading countless reviews and considering all of the top options out there I decided on the Square and can't wait to give it a try!
This will be my first Convection vape. I am considering buying an electric grinder (mostly because I'm lazy and have no time for the grinding "ritual" anymore) - and I am curious if anyone has an recommendations on which electric grinder would work best for the Haze Square.
I am considering the Herbagrind and Easy Grinder as the two frontrunners. Does anyone have any input or suggestions on which may be a good fit? I saw some conflicting comments pages back about fine vs medium grind with the Haze.
Looking forward to being a new Haze product owner - Thanks in advance, and stay up!
I am new to this forum and stumbled upon it after reading about and ultimately purchasing the Haze Square Pro. I am in on the second wave of preorders and am ecstatic to get the new device!
Up until now I've been using the original Pax which recently greatly degraded in battery life and prompted me to consider other alternatives. I literally got my Pax when it first came out so I was largely unaware of the new technology out there in the vaping world. After reading countless reviews and considering all of the top options out there I decided on the Square and can't wait to give it a try!
This will be my first Convection vape. I am considering buying an electric grinder (mostly because I'm lazy and have no time for the grinding "ritual" anymore) - and I am curious if anyone has an recommendations on which electric grinder would work best for the Haze Square.
I am considering the Herbagrind and Easy Grinder as the two frontrunners. Does anyone have any input or suggestions on which may be a good fit? I saw some conflicting comments pages back about fine vs medium grind with the Haze.
Looking forward to being a new Haze product owner - Thanks in advance, and stay up!
RobTheThrone
Well-Known Member
It arrived and it works really well. I haven't smoked in 24 hours and I've reduced my usage by a ton recently as I can't handle too much smoking so I wasn't even able to finish half a bowl. Followed the advice I was originally given on the technique and it worked well. Haven't noticed any combustion so far, but will update if that changes.
Had it on the lowest default setting and I inhaled and held down the button until one second after the green light came on. I kept inhaling after letting go of the button for a second and then I would just press the button again and repeat the cycle until I was out of breath without letting it linger on the green light for long.
Had it on the lowest default setting and I inhaled and held down the button until one second after the green light came on. I kept inhaling after letting go of the button for a second and then I would just press the button again and repeat the cycle until I was out of breath without letting it linger on the green light for long.
ginolicious
Well-Known Member
Interesting technique. Appears there are a few techniques that people are using. The one you outlined.
Holding the button the entire time with regular draw speed.
Or holding the button the entire time and increasing how quickly you draw to cool down the vapor so it doesn’t combust.
Archaicrevival
Well-Known Member
Yeah but the space case doesn't have AI integrated into it
You should offer the whole middle assembly SS. it would look cool between the black.
Last edited by a moderator:
Volteric
Well-Known Member
Swear to god if it came in SS and they hinted at a black matte bowl we’d all be clamoring !
With Haze....Not too many things are impossible 
Petunia Vanish
Well-Known Member
Suggestion: Upgraded mouthpiece 
mfw0mb
Dr. Octagon
I'd be quite happy to get a mix of pod types along with that top shelf package..... ya know, for science.
Agreed on SS lids. Haven't gotten mine yet, but SS is always favored over silicone for taste here.
First grinder ever bought was a space case, and has lasted around 15 years. Screen still intact with no warping. Only reason I don't use it anymore was bc I got the Gr8tr a few months back.
Last edited:
subway13029
Well-Known Member
Chewy2 is the best electric grinder there is..
Stdudez
Well-Known Member
Really?? I was looking at that one also but it looks so fragile in comparison. I also thought it looks difficult to clean/could gunk up easily with pollen. Looks to be kind of a medium grind as well versus a fine/fluffy grind.
I ordered the Herbagrind last night after reading some Amazon reviews.
Do you own the chewy and can attest to its use with the Haze Square? Now you have me thinking I should have ordered the Chewy 2!
MikeG7265
Well-Known Member
ginolicious
Well-Known Member
Interesting. So any firmware upgraded going forward will require a USB C flash drive?
Will the second pre order come with the new firmware?
You guys are too fast by the way.
The firmware upgrade is for users who mentioned delayed charging start. We do not expect regular firmware upgrades. If you are not experiencing delayed charging, no need to even upgrade
The firmware upgrade is for users who mentioned delayed charging start. We do not expect regular firmware upgrades. If you are not experiencing delayed charging, no need to even upgrade
subway13029
Well-Known Member
Yeah i have the chewy 2 and it had become my go to. I have tons of high priced grinders and this works great..its not a fine grind..more of a coarse but it works great with all my vapes. I believe @paytonpenn uses one as well.
Also to note since i got my square back this thing kicks ass..ive onlybused the bottom 2 temps so far and im almost scared to go higher bcuz i get huge flouds on twmp 1 and 2. Ive also noticed members saying they can see thei element glowing? I cant even see my elwment. My halves come together nice and i cant really see in there. But ive loaded directly into the pod with my chewy grinder and barely tamp down i would still consider it a fluffy pack and i usually turn my flowerpot on after work and hit it theu the evening but i packed a pod of some cheesequake with a dab of some crumble and got about 10 big hits on temp 1 and 2 and i ate a little dinner and never touch the fp and was zonked til morning..i mean straight to sleep..im really digging the way it hits but a tad concerned about higher temps..i also huff on this puppy..i feel if i slow hit it then i would char..and i only hold button past green for maybe 2 seconds and continue my draw after button released and fat hits!
Last edited:
ginolicious
Well-Known Member
@subway13029
Sounds great buddy. Glad it’s working well for you.
I’ll be only vaping on lower temps for flower and higher for concentrate. I’ll have no risk of combusting I hope.
Sounds great buddy. Glad it’s working well for you.
I’ll be only vaping on lower temps for flower and higher for concentrate. I’ll have no risk of combusting I hope.
Jambi619
Cannabis Crusader
Just confirmed it works. Now to see if I can return this drive...
Last edited:
Mister G
Deceptively Old Fart
I need this firmware but don't have a USBC flash drive, I have plenty of other type flash drives...
Too bad the app couldn't facilitate this. Hopefully it will be true that firmware will rarely be needed,
