Fluxer Heaters, induction heaters for Dynavap
- Thread starter mr_cfromcali
- Start date
-
- Tags
- induction heater
I'm sorry but it doesn't work that way. The under glass LEDs only illuminate with heater activation, so in this case, all four will be off, then all four will be on when activated. If you now want to change your order, please send me a PM with your order info, etc.
This is a good choice for both tip types. The 16mm x 2mm size is among my mildest insert sizes.
Thanks for your purchase!
RustyOldNail
SEARCH for the treasure...
@mr_cfromcali
In case you are still here. I received your email, and replied. Please leave the carbon fiber insert in the pre-built unit I ordered today. I read Baron23’s post above, he says the heater activation LEDS are visible with his carbon fiber insert unit. That was just a question I emailed you about as I was not sure. If the LEDS are visible, I’m fine with the CF insert, and will save you the trouble, thanks for the offer to replace with glass, but it doesn’t seem necessary. Unless there is any other reason I’m not aware of, I assume the CF performs the same as a glass insert?
In case you are still here. I received your email, and replied. Please leave the carbon fiber insert in the pre-built unit I ordered today. I read Baron23’s post above, he says the heater activation LEDS are visible with his carbon fiber insert unit. That was just a question I emailed you about as I was not sure. If the LEDS are visible, I’m fine with the CF insert, and will save you the trouble, thanks for the offer to replace with glass, but it doesn’t seem necessary. Unless there is any other reason I’m not aware of, I assume the CF performs the same as a glass insert?
Yes, the inserts perform the same. The CF is opaque, so the LEDs shine up instead of out, but they do project some light out of the insert and are visible.
Stonedbadger
Well-Known Member
Looking good @mr_cfromcali just wondering when you're next email will be sent out for the flux waiting list? Just thinking about ordering a flix along with the flux
It will be soon, but I still need to scrub the data for the September waiting list names, and I probably won't get to that for a few more days. The next set of FD emails are at least 4-5 days off, I think.
Naturesvapor
Well-Known Member
IvanChesnokov
Weedfinder General
Dont tell the ATF or they'll shoot your dog!
It must be able to output 10A of current continuously to power the Flix. I cannot read the label on your picture, so I can’t tell. Sorry
Aalberti13
Active Member
Question for @mr_cfromcali about ordering from Banggood. I placed my order for a power supply the same day that you recommended we do so (May 16). I just checked on my tracking info and it says that the estimated delivery wont be until 7/23.. Do they normally over estimate the arrival time, or did my package get on the slow boat? Just curious if you have any insight since you have ordered from them in the past. Not a big deal either way because ill have my new FD to hold me over until it shows up, just curious. 
- 1 Order Submitted May/16/2020 17:59:55
- 2 Payment Confirmed May/16/2020 17:59:58
- 3 Order Processing May/16/2020 18:00:33
- 4 Shipped May/26/2020 07:40:08
- Expected delivery date: 2020-07-23 07:40:08
BawlmerMerlin
Well-Known Member
Proud owner of FD #109 checking in after today's purchase of the new Flix, intended for use in my vehicle. I am looking for a recommendation of a specific automotive cigarette lighter power cord. I have not searched extensively, but have taken quite a good look, and I cannot seem to find anything in the required 10A range with minimum 18 gauge wire.
Any suggestions?
Any suggestions?
Baron23
Well-Known Member
@mr_cfromcali - kind of a stupid question, but do you expect that its just fine leaving the batteries in the unit when its up on the shelf? I mean, you don't recommend pulling the batts after every use, right?
I should think it would be no diff than my Eleaf mods where the battery is just left there between uses.
@RustyOldNail
I didn't even notice light coming up thru the insert...I'm sure @mr_cfromcali is right.... but I just saw that like 3 or 4 LEDs shined bright red when I activated the heater.....you can't miss it at all, really. Very obvious and to my liking.
Cheers
I should think it would be no diff than my Eleaf mods where the battery is just left there between uses.
@RustyOldNail
I didn't even notice light coming up thru the insert...I'm sure @mr_cfromcali is right.... but I just saw that like 3 or 4 LEDs shined bright red when I activated the heater.....you can't miss it at all, really. Very obvious and to my liking.
Cheers
Last edited:
TommyDee
Vaporitor
@mr_cfromcali - what is the current draw on the Flix at 9 volts? Wondering if a 9V brick option may be worthwhile. If it draws say 45-50 watts, it is sufficient to heat the tip within 10 seconds. That would be a much smaller supply and an alternate performance option.
Ordered an orange flix this morning, thanks for early heads up for FC members, was signed up for the list, but this made sure i got one.
Didn't choose any additional lights at the bottom, figuring it still comes with one that lights up the insert, hopefully not wrong. Also went with plain, no holes or bling around the insert. figure the other induction heaters i use don't have airholes, also plug ins, so figure may not need it on this.
Can't want for the variable power supply, this this will be better then the mother fluxer, which was just a larger with more battery flux delux. Being able to adjust thepower that way will be really great and get to try dif temps.
Gotta check to see if the power supply i use for my caldron will work on this, figure should be but gotta look at the label sometime first.
Didn't choose any additional lights at the bottom, figuring it still comes with one that lights up the insert, hopefully not wrong. Also went with plain, no holes or bling around the insert. figure the other induction heaters i use don't have airholes, also plug ins, so figure may not need it on this.
Can't want for the variable power supply, this this will be better then the mother fluxer, which was just a larger with more battery flux delux. Being able to adjust thepower that way will be really great and get to try dif temps.
Gotta check to see if the power supply i use for my caldron will work on this, figure should be but gotta look at the label sometime first.
Mono Loco
Well-Known Member
When I enlarged your photo, I could read the model number: Cobra CPP12000. On Cobra's website, I read the owners/user manual. There does not appear to be a 5.5mm x 2.1mm (or 2.5mm) round output jack ... just a USB output jack. While an adapter could be used to convert the jack type, the Amperage is still too low, @ only 3A.
Here is a contender, though.
Click here for Amazon Link
It has the required 12v 10A output with a 5.5mm jack ... but, if it is like my older example (model) from the same company (which is well made and which I have used to jump start a car three times with perfect success!), it is a 5.5 x 2.1mm ... so, as such, you'd need to use an interface cable that has a Male 5.5x2.1mm plug on one end (battery bank) and a slightly different 5.5x2.5mm plug on the other end (Flix) I have not seen such cables, so an adapter will likely need to be added to one end of the cable you get!
Last edited:
TommyDee
Vaporitor
Another Amazon 12V 10A 5.5x2.5/2.1 right angle supply. available in a few days -
We need a lot more of those options @Mono Loco
We need a lot more of those options @Mono Loco
Last edited:
I am running around today, plus I have a lot of shipments to package up - thank you! - so I can only pop in to the thread occasionally.
At 9V it is drawing 8.3A, so I don't think a low current 9V brick is an option at this time.
I purchased one of the above for testing and it's been fine.
The Flix has a 2.5mm x 5.5mm DC jack. I do include a 2.1mm (female) to 2.5mm (male) adapter with each Flix, so you can power it from a 2.1mm (male) power source if needed.
More Flix updates:
Thanks for giving the Fluxer web store such a warm welcome at yesterday's launch! The Flix is selling well, and the 10 FDs I posted sold pretty quickly - thank you!. I'll put together some more blems for sale when I have time.
I've given you guys a head start, so later today I'll notify the Flix email list that the web store is open and Flix are now for sale. Needless to say, I am very eager to get these into people's hands and hear what you think of it!
I ordered a supply of 2.5mm x 5.5mm 18AWG cigarette lighter adapters, for people who want to power their Flix via their car or boat. I'll sell those through the web store. They will be here in ~3 weeks.
I'm still working on getting some variable voltage power supplies and will post an update on those when I have some lined up.
I've posted the first version of the Flix Quick Start guide to the Flix page on my web site, and it's here as well: Flix Quick Start Guide.pdf . It's one double-sided page. I don't think there are any surprises, but please look it over if you'd like. A printed version ships with each Flix.
Final thing - I have a lot of shipping to do!
I will be working on that today and tomorrow. 
Cheers,
At 9V it is drawing 8.3A, so I don't think a low current 9V brick is an option at this time.
I purchased one of the above for testing and it's been fine.
The Flix has a 2.5mm x 5.5mm DC jack. I do include a 2.1mm (female) to 2.5mm (male) adapter with each Flix, so you can power it from a 2.1mm (male) power source if needed.
More Flix updates:
Thanks for giving the Fluxer web store such a warm welcome at yesterday's launch! The Flix is selling well, and the 10 FDs I posted sold pretty quickly - thank you!. I'll put together some more blems for sale when I have time.
I've given you guys a head start, so later today I'll notify the Flix email list that the web store is open and Flix are now for sale. Needless to say, I am very eager to get these into people's hands and hear what you think of it!
I ordered a supply of 2.5mm x 5.5mm 18AWG cigarette lighter adapters, for people who want to power their Flix via their car or boat. I'll sell those through the web store. They will be here in ~3 weeks.
I'm still working on getting some variable voltage power supplies and will post an update on those when I have some lined up.
I've posted the first version of the Flix Quick Start guide to the Flix page on my web site, and it's here as well: Flix Quick Start Guide.pdf . It's one double-sided page. I don't think there are any surprises, but please look it over if you'd like. A printed version ships with each Flix.
Final thing - I have a lot of shipping to do!
I will be working on that today and tomorrow. Cheers,
TommyDee
Vaporitor
Congrats on the launch of Flix! One quick note on the Flix ad - you might add images of the 2 options and what they mean compared to the base version.
Several of these supplies have hybrid plugs that will work with 2.1 and 2.5mm. They will fit tighter on a 2.5mm pin so that is a plus. They did this by making the positive contact a 'fork' style contact.
Several of these supplies have hybrid plugs that will work with 2.1 and 2.5mm. They will fit tighter on a 2.5mm pin so that is a plus. They did this by making the positive contact a 'fork' style contact.
Jill NYC
Portable Hoarder
I know you were asking @mr_cfromcali , but from what I can remember, he has said that as long as you aren’t storing the Flux for a long period of time without using, leaving the batteries in the Flux is fine.
Personally, the only time I remove my batteries is to charge them.
The Chemist
New member but long time lurker
I just ordered a flix 16mm coil with 2mm insert and I had to fight the urge to get a second one with a 15mm coil. I'm thinking i'll wait until my name comes up in the list for the flux and see if I still want one. I can't wait to have more info for the power supply and hopefully get one by the time my flix get here.
Aalberti13
Active Member
@The chemist - I was on the fence as well about coil/insert thickness but figured with the variable voltage of the power supply, we might be able to 'dial' it up for a little more kick when we want it. At least thats what I took away from @mr_cfromcali's post on page 1:
"With the new power relay, the Flix will operate on any voltage from about 7.8VDC to 12.6VDC. You really, really want to try this thing at ~8V - it's a revelation!
...the low voltage operation of the Flix is such a game changer... I have discovered what I think is the perfect PSU for this device, a simple Chinese-made adjustable voltage power supply that will make it very easy for you use the Flix with variable voltage."
Hopefully @mr_cfromcali can elaborate on VV vs coil size once he's done running around for the day and can sit down at the computer.
So excited to get mine, except the tracking info on that power supply says it wont be here until the end of July.. Hopefully it gets here sooner!
"With the new power relay, the Flix will operate on any voltage from about 7.8VDC to 12.6VDC. You really, really want to try this thing at ~8V - it's a revelation!
...the low voltage operation of the Flix is such a game changer... I have discovered what I think is the perfect PSU for this device, a simple Chinese-made adjustable voltage power supply that will make it very easy for you use the Flix with variable voltage."
Hopefully @mr_cfromcali can elaborate on VV vs coil size once he's done running around for the day and can sit down at the computer.
So excited to get mine, except the tracking info on that power supply says it wont be here until the end of July.. Hopefully it gets here sooner!
Yeah, the original my caldron came with went kaput. Ordered two more from a link that was given by pipes. Just checked and mine shows output 12 vold 5 amp.
Just added one that Mr_C linked, 12 volt 10 amp, was then able to also get another 3 prong adapter i needed. Justw ant ot make sure i can use the Flix when it arrives, as the power supply will likely get replaced by the adjustable voltage adapter once he has those.
Q for any/all. I am assuming if use this 12 v - 5 amp one on the flix, it would be under powered. And if i used the 12 v - 10 amp one on the caldron, my guess would be overpowered and possibly hurt the device? Don't have very much knowledge about this stuff, so appreciate if someone can confirm. Just want to make sure i make a mental note so i don't use one on the other and risk the device. Have a caldron from pipes, and have a caldron guts enclosed in a nice wooden enclosure from phatpiggie.
Mono Loco
Well-Known Member
FORKCombustion!