E-Nano from Epickai

ataxian

ataxian

PALE BLUE DOT
CarolKing said:
The cannabis in the stem after heated sticks together. I wouldn't worry about any cannabis falling into the oven. If if does no worries. Hold the Enano whatever way is comfortable for you. I hold mine in a natural position that you would hold any vaporizer.

This unit is so easy to keep clean. Basically keeping the stems clean and a swipe of the inside once a week. I use the stem rotation cleaning method. I have one sitting in ISO and a quick hot rinse after with water is all that's needed.

I have my temp on 6.25 using some kosher kush. Stormy outside but warm and cozy inside with my Enano.
Click to expand...
I don't want to bore you however let me?

GDP NANO GonG FCUFO tricked out!!

F^¢k me hard!

FLAVOR WISE. Excellent

Effect over the top!

GDP is an OLDER strain However not bad at all!

NANO provides flavor without changing it!

CANNABIS is the HOLY GRAIL!
 
Eyedunno

Eyedunno

Well-Known Member
Oh yeah, I should add that I have yet to combust herb with the nano, now more than a month in, and even doing things like filling it right up to the heater cover screen. I'm unlikely to now, as even through water, I no longer go higher than a hair above 7, as that gives me what I want. I don't really need roast coffee brown like I was getting on 7.5.
 
nano-macro

nano-macro

Well-Known Member
Pjake said:
Just use the stem horizontally. The nano is very small and easy to pick up and hold that way. Just tamp your material down slightly. I haven't had any problems with material falling on the heater and I doubt you will either. Welcome to the nano-nation.
Click to expand...
If you set it right, it doesn't burn or char even if it does touch the heater screen.

lightaqua said:
Hi everyone! I wanted to show how I rigged my bubbler and enano adapter together! I used moldable silicone ear plugs that I purchased at a drug store. I basically treated them like clay and fit it together to make a seal. If you wanted a more permanent solution sugru or silicone clay, which is usually used for mold making, would work great. My best advice would be to make sure you use it on an area that doesn't get hot or come in contact with heat. I'm not too sure if it safe that way, with mine it never gets hot, but makes a great seal for water hits. Plus, I get to use my bubbler again!

FQshioC.jpg
Click to expand...
Wow, which wood type is that? Beautiful grain
 
Tomy14

Tomy14

Member
Hello there! I've got a few complaints about the epicvape customer service.
About 12 weeks ago I ordered my enano to europe and got it with express delivery within 4 days. Unfortunately I recieved the wrong gong adapter so I sent an email to the support hoping to get a little discount on a future order or something.
I got my response 3-4 weeks later in which I got a code for free shipping. When I tried to use the code to buy a few accessories, the website said that the code was already expired.
So I tried to send another email to epicvape but with no success, I got an automatic email back which said that the recievers mailbox is full.

Today was the first day I was able to send a message to epicvape, I hope their response won't take weeks again.
From my experience that's not good customer service, I know epicvape is a small company but it's not acceptable to wait 3 months for a simple solution..
 
Tomy14,
lightaqua

lightaqua

Well-Known Member
I had more fun using the moldable silicone as a temporary join for my e-nano pieces. I used moldable silicone ear plugs which are sold in packs at CVS. Here is my Joda Gong with my elephant pipe. Obviously I don't want something permanent on my Joda piece, but it's nice to be able to use it with other pipes.

It's a fun afternoon.

Oh and the table was my Grandmother's, not sure what type of wood it's made out of.

2Nce5sd.jpg
 
Last edited:
CalyxSmokr

CalyxSmokr

Well-Known Member
Ground flower is super easy. Concentrates seem to take forever and quickly get much increased draw. Will those firefly concentrate pads help? Tried the bud sandwich technique and got kinda clogged. Am I just not cleaning enough or should I find another vape for copncentrates?
Tried at about 7 for sure. Do I need higher temps or to move the screen?
Tried on rolling paper and that worked but not well. Is this organic cotton thing a better option?
 
Eyedunno

Eyedunno

Well-Known Member
CalyxSmokr said:
Ground flower is super easy. Concentrates seem to take forever and quickly get much increased draw. Will those firefly concentrate pads help? Tried the bud sandwich technique and got kinda clogged. Am I just not cleaning enough or should I find another vape for copncentrates?
Tried at about 7 for sure. Do I need higher temps or to move the screen?
Tried on rolling paper and that worked but not well. Is this organic cotton thing a better option?
Click to expand...
Wow, I've had really good results with herb sandwich concentrates on the nano. I've so far only done it with dry stems and slow, shortish hits (makes a single packed stem last forever).

But honestly, I feel like a vape pen is a good investment. If you opt for a simple eGo-threaded passthrough battery (variable voltage is a bonus, but not absolutely necessary on any of my atomizers, at least) and an inexpensive atomizer, you could probably get a good enough vape pen for under $35. The difference between a cheap vape pen and a more expensive one is practically negligible (the expensive ones tend to either have an expensive gimmick like quartz glass chambers and stuff, or you're paying for branding), especially compared to herbal vaporizers, where more expensive very often means better.
 
CalyxSmokr

CalyxSmokr

Well-Known Member
Eyedunno said:
Wow, I've had really good results with herb sandwich concentrates on the nano. I've so far only done it with dry stems and slow, shortish hits (makes a single packed stem last forever).

But honestly, I feel like a vape pen is a good investment. If you opt for a simple eGo-threaded passthrough battery (variable voltage is a bonus, but not absolutely necessary on any of my atomizers, at least) and an inexpensive atomizer, you could probably get a good enough vape pen for under $35. The difference between a cheap vape pen and a more expensive one is practically negligible (the expensive ones tend to either have an expensive gimmick like quartz glass chambers and stuff, or you're paying for branding), especially compared to herbal vaporizers, where more expensive very often means better.
Click to expand...
I have a puffco which is the best thing I have tried period outside of a nail. Haven't tried the dry stem yet.
 
AJS

AJS

Calm Consistency
CalyxSmokr said:
Ground flower is super easy. Concentrates seem to take forever and quickly get much increased draw. Will those firefly concentrate pads help? Tried the bud sandwich technique and got kinda clogged. Am I just not cleaning enough or should I find another vape for copncentrates?
Tried at about 7 for sure. Do I need higher temps or to move the screen?
Tried on rolling paper and that worked but not well. Is this organic cotton thing a better option?
Click to expand...
Hey man, something that works flawlessly for me and my friends.

  • Push screen a little bit further down from default
  • Add your bud, pack it flat with the flat end of a pencil or something (but not tight)
  • ball up some oil and drop it on the top
  • *MAKE SURE HEATER WON'T TOUCH THE BALL*
  • If heater will touch, you can hover it
  • Melt the ball onto your herb by slowly drawing for a few seconds, or just until the second you see vapor (assuming you're using a bubbler)
  • Your herb should be golden with oil now
  • Take a deep breath, drop the Nano back on and take a ripper, starting off a bit slow to make sure the oil melts
  • The oil definitely over powers the taste of the herb, and keeps the herb from browning because you're basically vaping just the oil ontop of it for the first hit or two.
  • Stir, finish.
Awesome results with this method. I've never "sandwiched", I like my oil on top, seems more intuitive to do it that way.

As for cleaning...I've never had an issue directly related to oil...as the oil just vapes ontop of the bud til it's gone.
 
Eyedunno

Eyedunno

Well-Known Member
CalyxSmokr said:
I have a puffco which is the best thing I have tried period outside of a nail. Haven't tried the dry stem yet.
Click to expand...
Awesome, yeah, that works. :p I just opted for the Puffco atomizer, but it works great on any battery I try. I actually have a (glass) nail now, but I have not tried dabbing with it, and I really have very little desire to. Maybe sometime on a weekend or something... I don't actually find it necessary to turn to concentrates that often, and I still have most of a gram of honeycomb I bought back in June or July.

Edit: And yeah, the stuff @ajsitkowski suggested is good, especially letting the concentrates melt and soak up before you start hitting it in earnest.
 
BabyFacedFinster

BabyFacedFinster

Anything worth doing, is worth overdoing.
ajsitkowski said:
Hey man, something that works flawlessly for me and my friends.

  • Push screen a little bit further down from default
  • Add your bud, pack it flat with the flat end of a pencil or something (but not tight)
  • ball up some oil and drop it on the top
  • *MAKE SURE HEATER WON'T TOUCH THE BALL*
  • If heater will touch, you can hover it
  • Melt the ball onto your herb by slowly drawing for a few seconds, or just until the second you see vapor (assuming you're using a bubbler)
  • Your herb should be golden with oil now
  • Take a deep breath, drop the Nano back on and take a ripper, starting off a bit slow to make sure the oil melts
  • The oil definitely over powers the taste of the herb, and keeps the herb from browning because you're basically vaping just the oil ontop of it for the first hit or two.
  • Stir, finish.
Awesome results with this method. I've never "sandwiched", I like my oil on top, seems more intuitive to do it that way.

As for cleaning...I've never had an issue directly related to oil...as the oil just vapes ontop of the bud til it's gone.
Click to expand...

Nice method.:tup:

Now if I could just get my hands on some good concentrate.

I can't wait till this whole fucking thing is finally legalized. :rant:
 
ataxian

ataxian

PALE BLUE DOT
CalyxSmokr said:
Ground flower is super easy. Concentrates seem to take forever and quickly get much increased draw. Will those firefly concentrate pads help? Tried the bud sandwich technique and got kinda clogged. Am I just not cleaning enough or should I find another vape for copncentrates?
Tried at about 7 for sure. Do I need higher temps or to move the screen?
Tried on rolling paper and that worked but not well. Is this organic cotton thing a better option?
Click to expand...
I use cotton from a COQ 10 bottle or any supplement bottle.
Small cotton piece!

My GDP is way to strong!

Time to mix in some SOUR LEMON DROPS
60/40 = taste/effect = NANO

Don't hate!

CANNABIS is HOLY LOVE!
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
If you are getting any draw restriction over packing could be the culprit. Have to have enough air flow, you don't want your product butted up against the oven.

If using concentrates and you don't want to sandwich between the herb use some cotton to put your wax or shatter in the middle. I've thought about buying something to use as a concentrate pad.

@ataxian my strawberry cough is harsh. I've been turning down the heat to compensate. A good medicine but don't like the harshness. That must be why they call it strawberry cough because it makes me cough.:lol:

Using my D022 bubbler tonight along with the nano and some Gorilla Glue #4 - chasing the anxiety away. There's probably several water tools that would work well with this vaporizer.
 
Last edited:
Eyedunno

Eyedunno

Well-Known Member
LazyIdol said:
a shelf fell and broke my Gb-187 today. Wondering what everyone is using as their daily driver with the enano

Trying to decide if I wanna replace it or take this chance to grab somthing else
Click to expand...
I've been using the D020-D as my glass bubbler, and no complaints, but I would say why not get another GB-187? Seems nice. Or what about an FC-187, with the sidecar design? That seems really good too.
 
You must log in or register to reply here.
Top Bottom