southpaw9477
Member
Is the website set up to take 15% off classic kits? Only seeing them at $199 still
E-Nano from Epickai
f2j
Chaque jour est une chance
Hey guys,
So I recently had a problem with my cable (the cable near the plug that goes in the nano seemed to have a bad contact). So I decedid to cut and fix with another (but apparently identical) plug. Then I realized the new plug is slightly thinner , it was still working but it used to detach from the nano very easilly. Which caused my nano to fall on the ground numerous times.
So yesterday, I finally decided to fix that issue with a small 3D printed part I would create.
Here is the result :
It's small, light and does need a small amount of PLA, but it holds very well and solves the problem. It could even be the basis of a handle that could be adapted for a person with a disability.
Plus is has better stability on the rear (which can be the cause of a lot of falls in the beginning).
Not sure if this item would find its public on thingiverse, not even sure it would be usefull here, as the original cable is a good fit. But if someone wants to print his own, feel free to PM me.
So I recently had a problem with my cable (the cable near the plug that goes in the nano seemed to have a bad contact). So I decedid to cut and fix with another (but apparently identical) plug. Then I realized the new plug is slightly thinner , it was still working but it used to detach from the nano very easilly. Which caused my nano to fall on the ground numerous times.
So yesterday, I finally decided to fix that issue with a small 3D printed part I would create.
Here is the result :
It's small, light and does need a small amount of PLA, but it holds very well and solves the problem. It could even be the basis of a handle that could be adapted for a person with a disability.
Plus is has better stability on the rear (which can be the cause of a lot of falls in the beginning).
Not sure if this item would find its public on thingiverse, not even sure it would be usefull here, as the original cable is a good fit. But if someone wants to print his own, feel free to PM me.
howie105
Well-Known Member
One can use a little silicone sealer to tighten up the plug/socket. Just keep the sealer away from the electrical connections. May not be an easy thing to do but possibly worth pursuing or, send that sucker back to Epicvape.
Gomaruana
Well-Known Member
Hi guys, anyone knows about a good 220v -> 110v transformer for us EU peeps that is not too bulky? I have one from my local electronics shop but it buzzes very loud. I just ordered the nicer power cable and the wooden stand.
I really love this vape! Just got a Herborizer TI but it doesn't replace the e-nano, they both have their use case and both look very classy!
I really love this vape! Just got a Herborizer TI but it doesn't replace the e-nano, they both have their use case and both look very classy!
Pete
Well-Known Member
I gave someone my US travel adapter for them to use for a similar purpose. These things are overkill for the Enano since it only pulls about 20 watts, maximum - at normal settings mine is pulling 7 to 8 watts. But these things are smallish, go right into the plug. https://www.amazon.com/European-Adapter-TESSAN-International-American/dp/B07Y2ZNN6N/ref=sr_1_2_sspa
Gomaruana
Well-Known Member
I don't think the adapter you mentioned converts the voltage. It requires a dual voltage compatible device (110 and 220). On the e-nano website they state that running 220v will damage the e-nano.
Edit: I have this one and it makes such an annoying noise, it's mentioned in the reviews. I paid 40 euro for this thing in my local shop.
Goobay 54755 spanningsomvormer 230 V naar 110 V AC tot 100 W, voor de werking van elektrische apparaten uit de VS in Europa.: Amazon.de: Tuin
Goobay 54755 spanningsomvormer 230 V naar 110 V AC tot 100 W, voor de werking van elektrische apparaten uit de VS in Europa.: Amazon.de: Tuin
www.amazon.de
Pete
Well-Known Member
Sorry, you're right. I was looking for a less bulky one than what we had. The one I gave away looks like this. It downconverts to 110 V but doesn't adjust the frequency from 50 to 60 Hz. But frequency doesn't matter for a simple heater device like the Enano. https://www.amazon.com/Adapter-Voltage-Converter-Compatible-MacBook/dp/B07GML6P16/ref=sr_1_8
Gomaruana
Well-Known Member
Thanks for the link! I'm ordering one, looks way less bulky and annoying than the thing I have right now. Any other accessories you guys recommend?
Sour Dream
Blue Dream enthusiast
Wish the burl versions were on sale like the rest
The item states the device you are powering needs to be at least 25 watts. I'm not sure the Nano will pull enough to make it work.
Gomaruana
Well-Known Member
And the search continues
Pete
Well-Known Member
This one says it can power devices UNDER 230 watts. But it does mention a "fan work quiet", and "Silent working fan brings you undisturbed sleep", so maybe there is noise. https://www.amazon.com/Internationa...aightener-Universal/dp/B07V81Q4XG/ref=sr_1_28
This one is smaller and works with devices UP TO 150 watts. I didn't read the comments to see if there is a noise issue. https://www.amazon.com/dp/B07VB1YKG2/ref=sspa_dk_detail_2
This one is smaller and works with devices UP TO 150 watts. I didn't read the comments to see if there is a noise issue. https://www.amazon.com/dp/B07VB1YKG2/ref=sspa_dk_detail_2
TuffGhost09
Member
Hi everyone! I haven't posted in this thread for a while. I've always preferred using my enano with a 14 mm fixed screen GonG, but mine finally broke the other day (just moved into a place with tile floors, whoops). I ordered a replacement and just got it today, but it looks really different than the old one that I got maybe a year ago. It fits my water pipe and all but the "bowl" part is huge, maybe at least twice as deep as the old one. Is this what they're supposed to look like now, or did I get sent the wrong thing? It just feels really strange... I don't like packing large bowls so I don't know if I'm going to like this at all. The herb is further away from the heating element and I can't seem to figure out the right temp setting and technique to get a good hit. It seems like I have to turn it up much higher to get any kind of decent-sized hit at all, and when I did it didn't taste as good. Plus I was just so used to the old stem as I used it pretty much every day for about a year. This newer one even sometimes makes a horrible squeaking sound like fingernails on chalkboard when I slowly turn the E-nano while hitting, which I've always done to try and get a more even hit. The silicone itself doesn't have the Epic Vape logo either, not a big deal of course but I thought it had looked cool. Does anyone know what's up with the new glass screen GonG, and can you give me some tips on how to use it? Thanks in advance.
howie105
Well-Known Member
Unfortunately I don't use fixed screen stems or adapters, but I just stocked up on glass and my new silicone collars don't have the logo either. I also remember hearing that Epicvape changed manufactures for their glass, I think it was moved in house, but I won't swear to that direction. My only suggestion is let the E-Pick be your guide.
caseball2051
Well-Known Member
I just noticed that my dynacoil fits well in my E nano WPA.... Anyone ever try this combo before for concentrates? I am gonna try it out tomorrow!
TuffGhost09
Member
Thanks for your reply! I'm starting to get used to the new GonG already, tbh. Despite the drawbacks I mentioned, it seems to have a better airflow and be made of sturdier glass. Also, the squeaking sound went away. It seems I need to keep the dial around 7.5 to get a good hit, when I used to keep it around 6.75. I'm glad, because the E-nano is my be-all and end-all vape, and the only way I consume these days - I don't even think I own a pipe anymore. Would really hate not being able to enjoy it as much anymore.
caseball2051
Well-Known Member
I just had a good experience using my enano on its highest setting with a dynacoil in the wpa with fixed screen.
I put the dynacoil in and then loaded a small dab on the coil. I then used a torch to heat the glass slowly to melt the wax. I put the enano on the bowl and let it heatsoak for a couple minutes and good good vapor and taste on one big hit and then a mehh clean up hit after.
I put the dynacoil in and then loaded a small dab on the coil. I then used a torch to heat the glass slowly to melt the wax. I put the enano on the bowl and let it heatsoak for a couple minutes and good good vapor and taste on one big hit and then a mehh clean up hit after.
robm321
Well-Known Member
It's my main driver too. I have other options on the go.
I'm thinking about getting the $200 420 special since I had to rewire my power chord back on and glue the bottom on. Still working though after many years. Would just like a back up since I've been running it all day every day.
I'm thinking about getting the $200 420 special since I had to rewire my power chord back on and glue the bottom on. Still working though after many years. Would just like a back up since I've been running it all day every day.
arb
Semi shaved ape
I would if I was you.
Sour Dream
Blue Dream enthusiast
I ended up getting a basic maple one since its on sale at POTV, gonna get an underdog sc3+ as well still just to test them both
arb
Semi shaved ape
Its your nano it should be how you like it?
ataxian
PALE BLUE DOT
U R a Sapien from a era different than a old stoner from a different time?
Paper, cardboard roll’s, fruit’s, veggies was the way CANNABIS was enjoyed?
Today vaporizing is the preferred way 4-CIVILIZATION 2-enjoy this wonderful tree [CANNABIS]
The NANO is improved consumption of CANNABIS.