anda1anda2
Well-Known Member
Last edited by a moderator:
E-Nano from Epickai
Baron23
Well-Known Member
BigJr48
Well-Known Member
Wildeyedzan
Well-Known Member
@anda1anda2 digging the setup ,what wood is that ? Post a close up picture of the WPA in the futurr sometime if you don't mind 
Grabbed a bunch of my favorite og strain. Soooo milky with the enano. Ridiculous amount of vapor especially compared to the last flower I was using. It had decent clouds however this og is on a different level !!
Have a great night everyone
Grabbed a bunch of my favorite og strain. Soooo milky with the enano. Ridiculous amount of vapor especially compared to the last flower I was using. It had decent clouds however this og is on a different level !!
Have a great night everyone
anda1anda2
Well-Known Member
Thanks. Nano is maple burl. The burl has really aged nicely.@anda1anda2 digging the setup ,what wood is that ? Post a close up picture of the WPA in the futurr sometime if you don't mind
Grabbed a bunch of my favorite og strain. Soooo milky with the enano. Ridiculous amount of vapor especially compared to the last flower I was using. It had decent clouds however this og is on a different level !!
Have a great night everyone
Will definitely post some closer pics of the JoDa pieces. I’m super happy with them.
SloJimFizz
Unknown Member
Yea, your Nano looks like it it's the sibling to mine. The maple burl really has aged nicely.
Better shots of your Joda glass for sure, please. What's in the mid point of the stem, insert/inlay of some sort or carb?
@Teaturtle hope you get your Nano taken care of soon. I remember when you started having trouble not long after getting it. @nadia_epic will be in before too long.
So, first world problem here. I have nothing that would qualify as a Day Weed, imo.
Have a good week all.
Baron23
Well-Known Member
YOu can also use those handles to private message them through the board...hopefully, they have notifications allowed for FC.com
anda1anda2
Well-Known Member
It’s an opal encasement. Just for pretties...
I didn’t get a carb on this one as I have an @Oregonglassblower carb adapter already. Although, I probably should have added one on this piece also.
Hi all!
First let me thank you all for helping @Teaturtle ! Seriously this is such a wonderful community.
Secondly this is a perfect time to announce we’ve added an amazing Shipping and Receiving Manager to our little team. Ari, (shipping@epicvape.com) will be assisting with all shipping needs as well as handling our RMA requests and warranty repairs. It became clear that we’re growing and I needed some help. My apologies to any and everyone that has experienced slower than normal response times. We utilize automated emails as well that can sometimes create more confusion than assistance.
We have some very exciting things that are nearly ready to announce, I’m having a hard time keep them all to myself. However, these shouldn’t come at the expense of our customer care. I’m confident with the additional team member we’ll be knocking customer service out of the park once more.
With my apologies and praise,
Nadia
EpicVape
First let me thank you all for helping @Teaturtle ! Seriously this is such a wonderful community.
Secondly this is a perfect time to announce we’ve added an amazing Shipping and Receiving Manager to our little team. Ari, (shipping@epicvape.com) will be assisting with all shipping needs as well as handling our RMA requests and warranty repairs. It became clear that we’re growing and I needed some help. My apologies to any and everyone that has experienced slower than normal response times. We utilize automated emails as well that can sometimes create more confusion than assistance.
We have some very exciting things that are nearly ready to announce, I’m having a hard time keep them all to myself. However, these shouldn’t come at the expense of our customer care. I’m confident with the additional team member we’ll be knocking customer service out of the park once more.
With my apologies and praise,
Nadia
EpicVape
Last edited:
pxl_jockey
Just a dude
@nadia_epic does this mean that you’re passing any outstanding customer RMAs & repairs over to Ari? I’m glad to see y’all are growing the business to meet the rising challenge of outstanding customer service.
Epic truly does have an incredible fan(atic) base on FC, stalwart members- brave & true, always ready to help the helpless. I’m sure a fair amount of E-nano sales and web traffic is generated by the kick-ass folks posting in this thread. It’s such an amazing vape, it’s easy to get attached to and recommend!
Epic truly does have an incredible fan(atic) base on FC, stalwart members- brave & true, always ready to help the helpless. I’m sure a fair amount of E-nano sales and web traffic is generated by the kick-ass folks posting in this thread. It’s such an amazing vape, it’s easy to get attached to and recommend!
I wholeheartedly agree. This forum has been the largest cause of our expansions.
Ariana and I are both weeding through the RMAs but please email shipping@epicvape.com with your RMA number so we can get to it ASAP.
ataxian
PALE BLUE DOT
The NANO is so easy to use!
SloJimFizz
Unknown Member
UnevenPizza
I dream of Pizza
Marlon Rando
Well-Known Member
ataxian
PALE BLUE DOT
Nano gong full = civilization
Hey bro just so you know, I missed you round here. Hope you are okay. You left a hole bruv, I even stalked over at Vapor Asylum just to see if I could catch an Ataxian pool side image of bit of gos.
But it didnt feel the same, and I did hope they could fix it for you to post again.
Welcome back buddy, be sure to stick arounb this time.
BabyFacedFinster
Anything worth doing, is worth overdoing.
Marlon Rando
Well-Known Member
I should grab some Nano Cookies too. Playing with some fruitty pebbles and dog walker OG,
cruising at 7 on the altimeter.
Pssstt...I now have a profile on Instagram where you can reach out as well.
https://www.instagram.com/epic_nadia/
What is everyone loading in their stems this weekend?
https://www.instagram.com/epic_nadia/
What is everyone loading in their stems this weekend?
Last edited:
UnevenPizza
I dream of Pizza
Hashing a few things out with the nano this weekend
@nadia_epic that link doesn't work, this did for me: https://www.instagram.com/epic_nadia/
@nadia_epic that link doesn't work, this did for me: https://www.instagram.com/epic_nadia/
Hashing a few things out with the nano this weekend
@nadia_epic that link doesn't work, this did for me: https://www.instagram.com/epic_nadia/
Ooohhhh looks like a solid weekend is in the works.
Thanks for the url edit!
UnevenPizza
I dream of Pizza
It's really squishy CBD hash, the nano makes it so nice through the bubbler!
I just put a little bit of it on some organic cotton. The first hit is usually pretty whispy, I only take a short one for a few seconds. Then I stir everything around, it spreads in the cotton real nice and then you get some massive (2-3) hits. I usually stir around between hits, but it's not totally necessary.
I do have to say, I use the GonG and the entire cotton/hash is below the nano/heater core, so nothing drips into the heater. I have used the dry stem for hash in the past but only at at least a steep angle, so nothing drips into the heater.
Drippage is the reason I use cotton, the screen gets gunked up real fast and a lot of residue has collected in the bubbler. I'm trying to figure out what to do with the leftover cotton, maybe soak in ISO?
Strong, on demand convection hits, what more could you ask for????????????????
I just put a little bit of it on some organic cotton. The first hit is usually pretty whispy, I only take a short one for a few seconds. Then I stir everything around, it spreads in the cotton real nice and then you get some massive (2-3) hits. I usually stir around between hits, but it's not totally necessary.
I do have to say, I use the GonG and the entire cotton/hash is below the nano/heater core, so nothing drips into the heater. I have used the dry stem for hash in the past but only at at least a steep angle, so nothing drips into the heater.
Drippage is the reason I use cotton, the screen gets gunked up real fast and a lot of residue has collected in the bubbler. I'm trying to figure out what to do with the leftover cotton, maybe soak in ISO?
Strong, on demand convection hits, what more could you ask for????????????????