E-Nano from Epickai

Baron23

Baron23

Well-Known Member
cilantro said:
Hey friends, new Nano owner here. Picked one up on 4/20 and loving it. Regarding the E-pick – I know it's a multi-use measuring tool, but was curious about the load measure. Mine looks different than the one I found on pg. 712 or so, with the load measure notch in a different place. I like knowing where the factory-recommended setting is, and then exploring from there.

I know there are many variables at play on this vape, which is super cool. Would a good rule of thumb be to get the load as close to the heater as possible without touching? How far is too far to place that adjustable screen? Thanks in advance for the advice.
Click to expand...
They changed the look of the tool a bit, but there is still a long leg for setting default screen depth and a short one for setting top of the load.

Hope this is slightly helpful.

Its only my opinion, but this is the way to use a Nano (at least for me). Still LOVE the device, still love the company.

JfjmSBA.jpg


Summer said:
I'm a woman & I take no offense at being called girl or girilie, honey, sweetie, whatever endearing female term, unless its intent is derogatory.
Click to expand...

And that's why I love you! :tup::rockon::clap::nod::brow::lol:
 
Last edited:
SloJimFizz

SloJimFizz

Unknown Member
Happy Mother's Day mommy Nanoettes!

Nice pic @Baron23 very similar set up to mine. That the 14mm FC187?
@Hackerman glad your nanos back in your clutches. Need details on your tp heat sleeve. Is there a specific brand that will house the beefier nanos? :shrug:
Got some Sunset Sherbert and Cherry Kush milking my fc 187 for a wake and bake whilst making breakfast for.Mrs. Fizz.
:peace:
 
howie105

howie105

Well-Known Member
CloudMonet said:
While laying out the cash for my first desktop vape (i’ve Had 3 portables now), i’m trying to keep the budget low on accessories. I figured i’d Pick up the 14mm gong, and am looking for advice on what to do for a fairly cheap globe/bubbler...
Click to expand...

Define cheap? I have a Magic Flight Orbiter which fits your description (14mm globe) but for my tastes it a bit pricey.
 
CloudMonet

CloudMonet

Well-Known Member
KidFated. said:
Fc-187 or d020 from dhgate or a vaporbrothers hydrator :tup:
Click to expand...

Thanks, either should work perfectly. They’re 18.8mm, so I just need to remember that when I order.

howie105 said:
Define cheap? I have a Magic Flight Orbiter which fits your description (14mm globe) but for my tastes it a bit pricey.
Click to expand...

Damn, that thing is beautiful. Nice weight, too, for stability.
 
SloJimFizz

SloJimFizz

Unknown Member
howie105 said:
Define cheap? I have a Magic Flight Orbiter which fits your description (14mm globe) but for my tastes it a bit pricey.
Click to expand...

I have the fc-188, which is 14mm. The fc-187 is the 18mm version of the same bubbler. Either can be had for under $35.00 plus a good bit of your patience, shipped to your door.
Pick which is most compatible with your gear. Mine happens to be 14mm. So I buy all 14mm stuff. But I do have an adaptor to go to 18.
 
Sparkpug

Sparkpug

Well-Known Member
KidFated. said:
The orbiter is a great option as well. Sneaky Pete has a similar cheaper version of that. A 18-14 reducer is cheap too if you need one.
Click to expand...

I've had an Orbiter and have a Sneaky Pete globe. I much preferred the Orbiter due to its base being a block of wood with some weight with a rather easy draw. The Sneaky Pete globe will tip rather easily but if you're going to maybe hold it it would be better. It is also a bit bigger than the Orbiter. What I love about the globe though is the optional mouthpiece. That on an Orbiter would be epic(!) since it's glass and no tubing is needed.

Also the Dealie Buddy might work, it's $42 for a basic model (comes with a downstem and mouthpiece.) The basic model is perfect for the E-nano.

Oddly enough, ever since I got this vape I've been saying "Epic" excessively.
 
Baron23

Baron23

Well-Known Member
Summer said:
@Baron23, I think I asked you once before, but in lieu of searching, do you have a link to this claisen? Promise I won't ask again. ;) Thanks!

JfjmSBA.jpg
Click to expand...
I’m out an about now. Will dig it up for you later. But I would recommend Oregon Glass Bkower who makes similar (but prob of better quality). The one I have I believe is Chinese origin but dont know.

All - mine is an FC-188 w 14 mm joint. I like that size w the Nano.
 
Baron23

Baron23

Well-Known Member
Alegre

Alegre

Pobre payaso
Hackerman said:
I really like my adjustable. It allows me to keep the load away from the heat a little while still allowing a giant load.\ and a 7 setting.

The screens are standard screens, I think. Just finf something the right size and shape it.
Click to expand...

That's exactly what I'm after, bigger load at 7! Awesome that is working for you!
howie105 said:
If you keep it clean and don't take it out of the stem it will last a long time. I had the same screen in my daily driver stem for over a year and its works just like new.
Click to expand...

Great to know, thanks!
 
Sparkpug

Sparkpug

Well-Known Member
@Alegre Delta 3D studios does have this: https://delta3dstudios.com/basket-screen-press-bp380/

I got a sample of their screens and I think I just might pick that up. Would make it easy to be able to make your own and that one is sized right too.

So uh, I hate using a grinder. I paid for a Santa Cruz Shredder and I like it, but it's hard to use. All the constant screwing and unscrewing of the bottom makes my wrists hurt and I can never choose the right amount. It's usually way too much for a single Nano session (one puff at 6, 2nd at 7 usually, or just one sometimes...) Anyway, I just used the grater inside the E-pic and wow, that gives a nice grind. Should not have gotten the Shredder, but oh well.

I like everyone's glass. I find it hard to use pieces like that though. I am never consistent in how much I inhale through my glass pieces and the jar makes it easy to visually cue how much vapor I'm getting. But, for me the stealth factor is important and it's really easy to hide because it's a mug looking jar. I got some silicone straw plugs so if I need I can just pull the mouthpiece and put a straw plug into the hole, stuff my carb adapter and E-Nano stems into a drawer and cap the mug with a straw. Then slide the aromatherapy cup on the Nano and move the mug so it appears I am drinking out of it. I don't really have a place to hide other glass in a jiffy that doesn't entail having to get up and move.
 
Last edited:
Alegre

Alegre

Pobre payaso
Sparkpug said:
@Alegre Delta 3D studios does have this: https://delta3dstudios.com/basket-screen-press-bp380/

I got a sample of their screens and I think I just might pick that up. Would make it easy to be able to make your own and that one is sized right too.

So uh, I hate using a grinder. I paid for a Santa Cruz Shredder and I like it, but it's hard to use. All the constant screwing and unscrewing of the bottom makes my wrists hurt and I can never choose the right amount. It's usually way too much for a single Nano session (one puff at 6, 2nd at 7 usually, or just one sometimes...) Anyway, I just used the grater inside the E-pic and wow, that gives a nice grind. Should not have gotten the Shredder, but oh well.

I like everyone's glass. I find it hard to use pieces like that though. I am never consistent in how much I inhale through my glass pieces and the jar makes it easy to visually cue how much vapor I'm getting. But, for me the stealth factor is important and it's really easy to hide because it's a mug looking jar. I got some silicone straw plugs so if I need I can just pull the mouthpiece and put a straw plug into the hole, stuff my carb adapter and E-Nano stems into a drawer and cap the mug with a straw. Then slide the aromatherapy cup on the Nano and move the mug so it appears I am drinking out of it. I don't really have a place to hide other glass in a jiffy that doesn't entail having to get up and move.
Click to expand...

That's really nice! I won't be needing too many screens but if I did, I would buy it!
Hackerman said:
Love my leather wrap. No more toasty fingers. Yet, I can still enjoy the beautiful wood.

V0vO4vK.jpg
Click to expand...

I want one of those! Nicely done!
 
nadia_epic

nadia_epic

EpicVape Team
Company Rep
Hackerman said:
Ahhhhhhhhhhhhhh (sigh of relief), My baby is home. LOL

After being without for a few days and now, having her back, she is, by far my favorite. No torches, no batteries, no hassle. Pick her up and she makes me happy.

And, turnaround was incredibly fast. Epic's customer service is pretty darn incredible.

Really...... giant kudos to the peeps at Epic Vape.

I love my E-Nano and as it has been said before..... I hate everything. LOL

Thanks again @nadia_epic

Hey, are you guys looking for wholesale business or are you going to continue to handle all sales direct?
Click to expand...

Excited to see how happy your Nano makes you! Hahaha!

We are currently accepting a limited amount of wholesale orders. You can send any inquires to customerservice@epicvape.com.


Now to business.

I apologize for being MIA recently, I was in a bit of a car accident and am finally getting through the bulk of my work that was left untouched for a few days while I recovered. Nothing serious thankfully.

Our website is experiencing some minor technical difficulties. As the E-Nano has grown in popularity we are sizing up as quickly as we can and unfortunately we're not always fast enough. The new crowd of interested Nano customers has flooded the site over the past few months and we just weren't prepared. However, we've already handled the issue and should be back to tip top shape in the next 24-48hrs.

If you are having trouble logging in, resetting passwords, or any other web related issue please email me at support@epicvape.com.

Glass, Stands, & Contests.
My wish is finally coming true and it appears we may be getting in some larger custom glass to pair with the E-Nano. That's all I can say for now, but you will hear more soon!

Walnut Stands are nearly finished and will likely be open for purchase to our wait list customers as soon as our website is stable again. I will say they are not an exact wood copy of the current image on our site but they're also not an exact copy of the aluminum stands. You'll want to check it out when we add them to the site! We'll send out an email announcing their return as well as a post.

Contest! Yeah! Finalizing the legal mumbo jumbo that is required to be posted on our website and will be going live in less than two weeks. I can say it will include photos (though I was just fine with poetry until that was shut down, hahaha) so clean up those glass pieces everyone and get your E-Nano looking it's finest.

In conclusion, we have a ton of exciting things in the works over at EpicVape and a rapidly growing customer base but as always you know where our loyalties lie. So if you're emailing, calling, or posting on our social media pages let us know you're from FC. It's a friendly addition to our day.

Have an Epic night!
Nadia
customerservice@epicvape.com
 
You must log in or register to reply here.
Top Bottom