BabyFacedFinster

Anything worth doing, is worth overdoing.
hey guys just got a new e-nano. Is it normal to have a very small temp range that works? For instance a 5 will vape my bud slightly, a 6 will almost combust, I'm scared to go higher than that cause it turns pretty much/almost black at 6. Could this be an issue? and anything lower than a 5 wont work

I just put to 6.5 and it cleared a pack in 1 hit, tried to make sure draw speed was slow as well

You got some great responses already. I'll just add that if my dial accidentally bumps my power level from 6 to 6.3 or higher I notice the difference immediately in the taste.

My sweet spot changed when I replaced the power cord on mine.

Best wishes with your new nano!
 

ataxian

PALE BLUE DOT
hey guys just got a new e-nano. Is it normal to have a very small temp range that works? For instance a 5 will vape my bud slightly, a 6 will almost combust, I'm scared to go higher than that cause it turns pretty much/almost black at 6. Could this be an issue? and anything lower than a 5 wont work

I just put to 6.5 and it cleared a pack in 1 hit, tried to make sure draw speed was slow as well
Depends on your cure of your CANNABIS or the out-put of your reciprocal?

I had a line of power that was weaker on one side when I grew INDOORS.
My grower friend gave me an OZ of GODS GIFT that was drier than a pop-corn fart!

6.4 and lower in my case!
62% moisture is my aim,
CANNABIS consumption.

The FLAVOR is important to me personally.

The NANO is good for that.

Check your out-put first!

Cheap meter's from HARBOR FREIGHT might help you?
Water path is new to me. (JOINT'S were the fashion at the time)
My wife is anti-coughing so the NANO with water path is a sign of CIVILIZATION!
 
Last edited:

UnevenPizza

I dream of Pizza
Beautiful day off today.
This morning I found out I have a "dream car" (even though I don't even have a license). Been looking at pics of it while puffing on my nano for longer than I'd care to admit :lol:.

I've been trying out some different settings, seing if mine is also so sensitive, I tried to get it between 6 and 6.5. However I always keep forgetting to set a timer to get the same heat up time every try, for consistency.

I think that is a more influencial factor than load size, which is why I'm not weighing it (for now...)

Have any of you used markers/pens to mark a sort of baseline for the basket screen and/or the load?
I usually use the silicon cover, but it's a bit too loose.
 

Baron23

Well-Known Member
Ran the Nano last night with a carb'd adapter and gong and it was fabulous. The nano is perfect for those who may like a light, frequent, sessions through the day but it will also rip huge clouds, which is not what its generally viewed as.

Key to me is heat soak (let the dang thing warm up well) and a gong/water pipe work well to allow me to take BIG ass draws.

I have been goose hunting all week and hurting from head to foot and wasn't interested in sipping last night....and my Nano delivered! :tup:

JZugCfT.jpg
 

ataxian

PALE BLUE DOT
Ran the Nano last night with a carb'd adapter and gong and it was fabulous. The nano is perfect for those who may like a light, frequent, sessions through the day but it will also rip huge clouds, which is not what its generally viewed as.

Key to me is heat soak (let the dang thing warm up well) and a gong/water pipe work well to allow me to take BIG ass draws.

I have been goose hunting all week and hurting from head to foot and wasn't interested in sipping last night....and my Nano delivered! :tup:

JZugCfT.jpg
I like the NANO for some of your comment's.

The NANO taste so amazing to me + it's just right & effective! (I can study with a NANO)

You can adjust your water tool up or down depending on your preference?

I fill above the perk and sometime at the perk?

I'm behind concerning my VAPORIZING schedule because I'm so engaged in this book I'm reading.

Excuse me!

Time to NANO for CIVILIZATION
 

Baron23

Well-Known Member
I like the NANO for some of your comment's.

The NANO taste so amazing to me + it's just right & effective! (I can study with a NANO)

You can adjust your water tool up or down depending on your preference?

I fill above the perk and sometime at the perk?

I'm behind concerning my VAPORIZING schedule because I'm so engaged in this book I'm reading.

Excuse me!

Time to NANO for CIVILIZATION
Hi Ataxian - this was an older pic. I too generally only just over the perc in the WP.

Cheers
 

ataxian

PALE BLUE DOT
Hi Ataxian - this was an older pic. I too generally only just over the perc in the WP.

Cheers
I loved your use of the CASIEN for a carb.
I took my FC UFO and a smaller MOUTHPIECE Water just over the PERK and 6.4 on my NANO & old CASIEN for a CARB and it was very satisfying! .

I took photo's but I can't load them?
I use imgur.com usually?

We need more stable people like U @Baron23 !

Sometime I fill the water in the can higher.
Lately just over the perk = I change water pipes for can size.

Excuse me I need another NANO session to stay CIVIL!

Put your water level where U like.
There is not a right or wrong way!
Just a way!
iVwlf6b.jpg
 
Last edited:

ataxian

PALE BLUE DOT
Oh, god....that's the last thing this poor world needs is more like me! hahaha

If anybody is interested in the carb'd adapter, Oregon Glass Blower has recreated the VXH Cloud Buddy and you can get them here in either 14 or 18 mm

http://www.oregonglassblower.com/GLASS-ADAPTERS_c3.htm
Oregon Glass BLOWER'S made my mouthpiece's?
Mike is MR. TALENT like ACE is in making the best vaporizer in this size the = NANO

EPIC = CIVILIZED
 

BabyFacedFinster

Anything worth doing, is worth overdoing.

pxl_jockey

Just a dude
If @Baron23 says it, I am taking it to the bank. He's been right too dang often.

Hope Y'all have a great New Years, or had, or are having...
Wherever you may be, on our dot
I just know it's going to be an EPIC 2018!
You folks have helped me so much this year
I'm not the brightest student, but you've been patient
And kind. Another word for it maybe? CIVILIZED

@nadia_epic & @ACE OF VAPE Thank YOU for all you've done for me in 2017!
 

UnevenPizza

I dream of Pizza
I am like the cat, hiding in my bed now. Alcohol and Explosives? Who the hell came up with that! I'm better off without either one haha!

Happy nano-new year to y'all!

Looking forward to Nano+Coffee for breakfast tom...today! Yikes, look at the time!

"

POZZO:
Gentlemen, you have been . . . civil to me."
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
Mike does good work and is worth patronizing his business.

Cheers

I wonder if Mike would be interested in making a carbed gong for the nano. When you look at his 18mm carbed adapter, the only difference would be instead of having one end an 18mm female ground glass fitting it would be straight glass for the adjustable bowl end.

I imagine some folks here would be very interested.

Happy New Year everyone!
 

Baron23

Well-Known Member
I wonder if Mike would be interested in making a carbed gong for the nano. When you look at his 18mm carbed adapter, the only difference would be instead of having one end an 18mm female ground glass fitting it would be straight glass for the adjustable bowl end.

I imagine some folks here would be very interested.

Happy New Year everyone!
You can always just ask him. I believe he takes on custom work. The VXH Cloud Buddy remakes were done at momofthegoons request but they are pretty widely applicable. With the gong bowl built in, maybe not so much.
 
I wonder if Mike would be interested in making a carbed gong for the nano. When you look at his 18mm carbed adapter, the only difference would be instead of having one end an 18mm female ground glass fitting it would be straight glass for the adjustable bowl end.

I imagine some folks here would be very interested.

Happy New Year everyone!
Last time he did another glassblower got pissed claiming the design was his.
 

ataxian

PALE BLUE DOT
Last time he did another glassblower got pissed claiming the design was his.
I am using the NANO like a bonus at the end of a great well prepared dinner.

Flavor = on par!
EFFECT = how credible is your TOP SHELF?

I like the size = EPIC


@Baron23 the carb work's like a bought one!

MIKE from OGB is da best for rigging stuff!

So solid!
 

Baron23

Well-Known Member
Last time he did another glassblower got pissed claiming the design was his.

Wow, well....people can claim what they want, but a carbed gong seems to be rather generic glass design and not something proprietary....but what do I know. haha

@Baron23 the carb work's like a bought one!

MIKE from OGB is da best for rigging stuff!

I'm sure it does and yes he is! :tup::rockon::clap::nod:
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
Wow, well....people can claim what they want, but a carbed gong seems to be rather generic glass design and not something proprietary....but what do I know. haha

That was my reaction also. If I could shove the tiny little "carb tube" in the side of one of my gongs I would have done it years ago. Truth be told, the existing carbed gong on the glassblower's website looks great (and so do the J hooks :)), but you still need to put a gong on top for the nano. I'm trying to avoid the need for extra glass pieces and I also wouldn't think someone could corner the market on a gong with a tube coming out the side of it.

I just heated up some Cheese with the nano and ran it through my 14mm gong with its respective J hook. You do get more flavor without water but it can be a dry hot hit. I find sipping the glass helps.

The Golden Goat is also my new favorite hybrid. I remember when the R3DBAND brothers used to smoke it all the time. Before they got all ... whatever.
 
Last edited:

unsorted

Well-Known Member
That was my reaction also. If I could shove the tiny little "carb tube" in the side of one of my gongs I would have done it years ago. Truth be told, the existing carbed gong on the glassblower's website looks great (and so do the J hooks :)), but you still need to put a gong on top for the nano. I'm trying to avoid the need for extra glass pieces and I also wouldn't think someone could corner the market on a gong with a tube coming out the side of it.

Here's a link to a post back in April:

http://fuckcombustion.com/threads/e-nano-from-epicvape.7844/page-752#post-1108527
 

ataxian

PALE BLUE DOT
That was my reaction also. If I could shove the tiny little "carb tube" in the side of one of my gongs I would have done it years ago. Truth be told, the existing carbed gong on the glassblower's website looks great (and so do the J hooks :)), but you still need to put a gong on top for the nano. I'm trying to avoid the need for extra glass pieces and I also wouldn't think someone could corner the market on a gong with a tube coming out the side of it.

I just heated up some Cheese with the nano and ran it through my 14mm gong with its respective J hook. You do get more flavor without water but it can be a dry hot hit. I find sipping the glass helps.

The Golden Goat is also my new favorite hybrid. I remember when the R3DBAND brothers used to smoke it all the time. Before they got all ... whatever.
I had a repair person to fix my reception so my wife wouldn't let me medicate?

The repair guy finally left.

My NANO warm and ready since this AM.

FLAVOR = 9.2523478945
EFFECT = DITTO

Have GonG will NANO (@Baron23 brother wake up!)

NANO 6.3425 + GonG + DOS SIDOS + FC 187 + MOUTHPIECE REDUCTION = CIVILIZED
NANO 6.2000 +DITTO = LIKE VERY MUCH = Had to ADJUST!
 
Last edited:

Baron23

Well-Known Member
Have GonG will NANO (@Baron23 brother wake up!)

Wake up!! LOL

I was up at 6:20 to go to cardiac rehab, then home to change into hunting clothes, then 70 mile trip each way to the eastern shore, and five hours of goose hunting in a fairly open blind in some really fucking cold weather.

Wake up??...shit, I'm going to vape and pass out! LOL
 

Whissmu

Well-Known Member
a couple of days ago I discovered, that my nano has two colors or tones :o, I do not know if they were always there or with time and heat have been highlighted more ... the fact is that every day I like more my nano :love:!

On the occasion of the Christmas holidays I got a little oil (BHO somango kush) although I had good results :rofl:, I was wondering if you raise the temperature for the use of concentrates or use the same temp as for flowers? :hmm:

image.jpg

image.jpg

image.jpg


happy new year 2018 FC !!
 
Last edited:
Top Bottom