kingofnull
ace
Yay ataxian is on board! Welcome to the harem, ataxian!
E-Nano from Epickai
ataxian
PALE BLUE DOT
My stuff works real well.
However the NANO is built very well and the size makes sense.
The NANO works with all my water paths.
I use all my stuff daily however the NANO is always in the rotation.
The FLAVOR is strong however remains sweet!
kingofnull so you have a NANO as well?
luvdavape
Member
I got my Nano two weeks ago and have meant to post sooner but have been busy and when not busy... well, err... ripped. Oh wait it's 2013, I meant medicated.
I've tasted flavors that Willy Wonka can only dream about.
The E-Nano is living up to all my expectations and they were high. I started vaping e-cigs over three years ago and quickly started using large battery mods and making my on e-juice. I now make my own coils (heating element). The reason the vaporizers in the e-cig world are called mods is because when I first started you had to mod everything to get them to work efficiently and there was and still is tons of discussion and modifications although now things are much easier.
The reason I mention that is a lot of people have talked about where the dimmer switch is located and it looks like a fairly simple modification. Surprised someone hasn't mentioned or done it. Give it time.
The silicone tubing around the GonG works great. I saw that here after I had already figured it out and thought I'd post for a tip but was too late. I just force it on and roll it back over itself so it's twice as thick. About 1/2" wide just above the male joint. I can still see most of the bowl. Perfect solution and you still have glass on glass which I prefer. I use a SSFG Travel Beaker and I can hold it, mate the e-nano on the gong, hit it and remove the gong to clear with the same hand that's holding the nano. Love it!
I generally run at 6.5 - 7 using the stem and 7.5 with Beaker.
Absolutely love the all glass stem (and GonG). I first used a screen as well but no more. Better air-flow and just easier to deal with. I find I prefer not grinding. I put a nug in and take a hit, stir and then... bliss. I don't have a problem with material getting through. If I do it's so rare I can't remember.
I'm sorry I don't have other vaporizers to compare the E-Nano too but I can tell you I couldn't be more pleased and I was concerned because the herb I've been using has until now been almost impossible to vape.
(I tried it with one of those cheap Chinese box units at all temps, including the highest. Ground, not-ground, didn't make a difference. Very wispy if anything.)
I did a lot of research before deciding on the E-Nano so if you're on the fence I am highly confident in recommending it. It's very old-school, very reliable, tried and true tech that will not break down. Ceramic heaters are made to run continuously if needed. The ceramic heater blows other units in it's class out of the water. It's on par with desktop units over four times it's size. Temperature is variable from off to too high and heat-up is quick. Air-flow is comfortably satisfying and clean. Can use a variety of stems and accessories.
... What's not to like? Buy it, you'll be glad you did. If it's your first why not start with one of, if not the best.
Someone said it's best through glass/bong/bubbler/water-pipe and I imagine that's true of any vaporizer but it's definitely true with the E-Nano... just like in the videos.
I'll usually start my evenings with a couple of gong stems or so through glass and then maintain that sipping a stem. Aaaaahhh
Over two weeks with this little honey and I'm still astonished at the flavors I've been missing. I mean!
I've tasted flavors that Willy Wonka can only dream about.
The E-Nano is living up to all my expectations and they were high. I started vaping e-cigs over three years ago and quickly started using large battery mods and making my on e-juice. I now make my own coils (heating element). The reason the vaporizers in the e-cig world are called mods is because when I first started you had to mod everything to get them to work efficiently and there was and still is tons of discussion and modifications although now things are much easier.
The reason I mention that is a lot of people have talked about where the dimmer switch is located and it looks like a fairly simple modification. Surprised someone hasn't mentioned or done it. Give it time.
The silicone tubing around the GonG works great. I saw that here after I had already figured it out and thought I'd post for a tip but was too late. I just force it on and roll it back over itself so it's twice as thick. About 1/2" wide just above the male joint. I can still see most of the bowl. Perfect solution and you still have glass on glass which I prefer. I use a SSFG Travel Beaker and I can hold it, mate the e-nano on the gong, hit it and remove the gong to clear with the same hand that's holding the nano. Love it!
I generally run at 6.5 - 7 using the stem and 7.5 with Beaker.
Absolutely love the all glass stem (and GonG). I first used a screen as well but no more. Better air-flow and just easier to deal with. I find I prefer not grinding. I put a nug in and take a hit, stir and then... bliss. I don't have a problem with material getting through. If I do it's so rare I can't remember.
I'm sorry I don't have other vaporizers to compare the E-Nano too but I can tell you I couldn't be more pleased and I was concerned because the herb I've been using has until now been almost impossible to vape.
(I tried it with one of those cheap Chinese box units at all temps, including the highest. Ground, not-ground, didn't make a difference. Very wispy if anything.)
I did a lot of research before deciding on the E-Nano so if you're on the fence I am highly confident in recommending it. It's very old-school, very reliable, tried and true tech that will not break down. Ceramic heaters are made to run continuously if needed. The ceramic heater blows other units in it's class out of the water. It's on par with desktop units over four times it's size. Temperature is variable from off to too high and heat-up is quick. Air-flow is comfortably satisfying and clean. Can use a variety of stems and accessories.
... What's not to like? Buy it, you'll be glad you did. If it's your first why not start with one of, if not the best.
Someone said it's best through glass/bong/bubbler/water-pipe and I imagine that's true of any vaporizer but it's definitely true with the E-Nano... just like in the videos.
I'll usually start my evenings with a couple of gong stems or so through glass and then maintain that sipping a stem. Aaaaahhh
Over two weeks with this little honey and I'm still astonished at the flavors I've been missing. I mean!
ataxian
PALE BLUE DOT
luvdavape: were on the same page!
This thing is like a VAPOLUTION in a VAPE WAND format. (CLASSIER)
Leaving the FLOWER whole is a really good ideal.
The plant acts as an insulator.
Time to WAKE & VAKE!
Ok!
No Grind!
Love it!
7.5 was my setting without grinding and my path was water!
When your flavor profile is this sweet forget about the explanation!
alexwallis
Well-Known Member
Hi all, I just ordered my nano today,
I have a bit of a question, I used the FCLOVE code, can I just confirm does this mean I get the all glass stem instead of the nano glas stem with pinch?
if so, apart from the stem with the pinch having a metal screen are there differences between the two stems, for example I have read comments about the all glass stem having a wide bowl.
Does this mean I am likely to be dropping herb everywhere?
Is the nano glass stem smaller than the all glass one? now that I have used the code wondering if I should modify my order and get one of the nano stems with the pinch as well as the all glass stem.
I have a bit of a question, I used the FCLOVE code, can I just confirm does this mean I get the all glass stem instead of the nano glas stem with pinch?
if so, apart from the stem with the pinch having a metal screen are there differences between the two stems, for example I have read comments about the all glass stem having a wide bowl.
Does this mean I am likely to be dropping herb everywhere?
Is the nano glass stem smaller than the all glass one? now that I have used the code wondering if I should modify my order and get one of the nano stems with the pinch as well as the all glass stem.
ataxian
PALE BLUE DOT
This thing is great for flavor.
I'm just loading my GSC's whole without grinding.
The water path is very good!
The GonG is the most important accessory in my option.
If you have the water adapter your fine.
Yes the FCLOVE gets you the all glass stem. There is no difference betwen the stems other than one has a glass screen welded in.
I s
Tease!!! I should probably stop following this thread until I receive mine, your posts are driving me crazy!
This thing is great for flavor.
I'm just loading my GSC's whole without grinding.
The water path is very good!
The GonG is the most important accessory in my option.
If you have the water adapter your fine.
Tease!!! I should probably stop following this thread until I receive mine, your posts are driving me crazy!
ataxian
PALE BLUE DOT
Tease!!!
I should probably stop following this thread until I receive mine, your posts are driving me crazy!
OK it's Tuesday so what did I do?
NANO Nation!
Different ASH CATCHERS NANO ready:
Did some GSC and OG without using the grinder.
Crazy Sweet Flavors.
The effects unbelievable.
Have a good strain ready to vape.
With a water path this thing is awesome!
JJ420
chillin on the couch, sippin off a 22 ounce.
Just got my E-Nano Elite in the mail... first impressions: beautiful!
This thing looks TITS!!
Edit: Just got done vaping three packed stems outta this thing and um yeeaaah, it gets you waaay ripped, but unlike the SSV high it's a lot more manageable.
I settled down to a 6 on the dial from a maximum of 8, and it seems thus far that 5.5 may be around the minimum. Once you hit right on the money you will know it.. addicting flavor, on par with the SSV. Great, great and VERY beautiful little vape! Gotta say that I am really happy with my purchase. Another excellent addition to the collection.
Thank You Andy!
This thing looks TITS!!
Edit: Just got done vaping three packed stems outta this thing and um yeeaaah, it gets you waaay ripped, but unlike the SSV high it's a lot more manageable.
I settled down to a 6 on the dial from a maximum of 8, and it seems thus far that 5.5 may be around the minimum. Once you hit right on the money you will know it.. addicting flavor, on par with the SSV. Great, great and VERY beautiful little vape! Gotta say that I am really happy with my purchase. Another excellent addition to the collection.Thank You Andy!
ogcook
Well-Known Member
Pics or it didn't happen!Just got my E-Nano Elite in the mail... first impressions: beautiful!
This thing looks TITS!!
ataxian
PALE BLUE DOT
It hasn't happened yet however I will cut this up and have it customized to accommodate the NANO.Pics or it didn't happen!
I promise to post some MILKY VIDEOS.
One of the SMOKE SHOPS agreed to customize for my craziness.
Here's a picture of the water pipe I will cut up and modify:
I see some of you guys seem to fill your stems/gongs almost full with material. So when you guys put the Nano into the stem/gong the heater port actually makes contact with the material???
I always leave a gap between heater and material. No convection going on. I always thought logs are meant to be used like that. I cringe when a friend of mine loads a stem all the way full and presses the hot heater ontu it. But that's just me, maybe.
I always leave a gap between heater and material. No convection going on. I always thought logs are meant to be used like that. I cringe when a friend of mine loads a stem all the way full and presses the hot heater ontu it. But that's just me, maybe.
kingofnull
ace
There is usually a space between the heater and the material for me. Sometimes I'll pack it slightly more so the material is just touching the heater, but it doesn't seem to cause too much conduction; the spent material generally looks the same as it would if it weren't touching the heater.
EveryDayAmnesiac
Well-Known Member
*I* usually use a small enough amount to where there is a
Too little gap, and you can get get burned spots on the top of your herb, if you're going anything above 6.5. Even 6, sometimes. Too much gap, and you might not get any vapor unless it's your first hit, or unless you've got your "knob" turned up higher than it needs to be. In my opinion. Your draw speed will really make a difference here.
You'll find what's right for you!
After months of use, I have found that with about 1/8 inch free space, from morning to night, works well. I go 5.5 in the morning, 5.75 in late morning, 6.0-6.25 for the afternoon, 6.5 for evenings, and 7.0 until sleepytime and that works best for me.
I will now crawl back to my corner and put my "Dunce Cap" on.
Lokbok
Well-Known Member
So owned my Nano for about a month and its definitely my daily now. The thing is top notch. The only thing I have against it is that it is quite easy to spill herbs everywhere. I will admit that its mostly due to how I use the thing because I like to be doing other things while vaping.. so I'm moving around a lot. I've even managed to spill out herbs with my Solo before, but never with the MFLB due to how it holds its material.
So my question is.. any other draw straws or techniques you guys use to avoid spillage? I mean one of the times was straight up my girlfriend knocking it off the table on accident, but 2 other times it was literally the draw straw getting stuck to my dry ass lips as I was placing the Nano back down.
Another question I have is Andy and a few others told me that he/they prefer not to grind up the herbs.. but I know both the MFLB and the Solo definitely offered much bigger hits with grounded herbs. You guys notice any difference with grounded vs ungrounded?
Thanks in advance for any input.
So my question is.. any other draw straws or techniques you guys use to avoid spillage? I mean one of the times was straight up my girlfriend knocking it off the table on accident, but 2 other times it was literally the draw straw getting stuck to my dry ass lips as I was placing the Nano back down.
Another question I have is Andy and a few others told me that he/they prefer not to grind up the herbs.. but I know both the MFLB and the Solo definitely offered much bigger hits with grounded herbs. You guys notice any difference with grounded vs ungrounded?
Thanks in advance for any input.
lazylathe
Almost there...
I use mine at just over 6 all the time, three small notches past the 6 on the dial.
Break off a solid nug and place in stem and away i go.
Sometimes it touches the heater mesh and other times it does not.
Never noticed any burning etc...
I always give it a stir to extract all that i can from a load, no big deal and the EPic makes it so easy!
If you find it sticking to your lips just lick them before you start and lightly turn the stem while you draw.
No more stem stuck to lips!!
Another option is to place a bit of medical grade silicone on the stem which creates a tighter seal between the stem and the Nano.
So far the only time i have ever spilled is when stirring, sometimes a bit will fall out during that process.
Otherwise i find no faults with my Nano!!!
Break off a solid nug and place in stem and away i go.
Sometimes it touches the heater mesh and other times it does not.
Never noticed any burning etc...
I always give it a stir to extract all that i can from a load, no big deal and the EPic makes it so easy!
If you find it sticking to your lips just lick them before you start and lightly turn the stem while you draw.
No more stem stuck to lips!!
Another option is to place a bit of medical grade silicone on the stem which creates a tighter seal between the stem and the Nano.
So far the only time i have ever spilled is when stirring, sometimes a bit will fall out during that process.
Otherwise i find no faults with my Nano!!!
ataxian
PALE BLUE DOT
The NANO is like a wand version of the vapolution only classier and more compact.
Well I still like my VAPOLUTION V2 and the loading of the whole flowers without grinding. (Looks like a HAZBRO toy) I use it dry since I got the NANO.
With the NANO I was loading the GonG the same way. (BETTER for water path)
Very rich in flavor.
You can prepare your GonG either way. (grind or whole)
A nice Water Piece with a NANO loaded with a piece of flower!
Remember the first cell phones?
Vapolution!
NANO:
JJ420
chillin on the couch, sippin off a 22 ounce.
Wow... Just now realized I had the all-glass stem this whole time! Yesss!!! 
And what a difference it makes too. The standard glass stem with removable stainless screen SUCKS. The fitment is loose at best and hits far too airy given the stems larger diameter and all.
But the all-glass stem fits the Nano like a glove, and it also allows the user to realize the vape's potential too. That little bit of added restriction to the air path helps out enormously. The upgraded stem really should be standard equipment for such a nice vaporizer as this.
And what a difference it makes too. The standard glass stem with removable stainless screen SUCKS. The fitment is loose at best and hits far too airy given the stems larger diameter and all.
But the all-glass stem fits the Nano like a glove, and it also allows the user to realize the vape's potential too. That little bit of added restriction to the air path helps out enormously. The upgraded stem really should be standard equipment for such a nice vaporizer as this.
shredhead
Specialist
Wow... Just now realized I had the all-glass stem this whole time! Yesss!!!
And what a difference it makes too. The standard glass stem with removable stainless screen SUCKS. The fitment is loose at best and hits far too airy given the stems larger diameter and all.
But the all-glass stem fits the Nano like a glove, and it also allows the user to realize the vape's potential too. That little bit of added restriction to the air path helps out enormously. The upgraded stem really should be standard equipment for such a nice vaporizer as this.
This is why I mostly use silicone bowls. With all my log vapes I get way fuller hits with a tight silicone seal rather than sometimes loose glass seals. The nano all glass stem is a great example of a perfect glass stem. I find the UD ones to be way too loose and I haven't tried any turbo tubes. But for the most part I use silicone for ease and better hits overall.
Lokbok
Well-Known Member
Maybe I should get the all glass stem. Which one are you guys using? I thought the one that came supplied with the Nano was the all glass stem, but looking at their site I noticed there are different ones. I'm guessing this is the one that comes with the Nano?
http://www.epicvape.com/accessories..._aromatherapy_botanicals_herbal?product_id=71
And this is the all glass stem you guys are talking about?
http://www.epicvape.com/accessories_vaporizer_wood_custom_aromatherapy_botanicals_herbal/glass wand
As a side note.. there was some mention of getting the silicone piece.. is it the same one sold on the site?
Thanks.
http://www.epicvape.com/accessories..._aromatherapy_botanicals_herbal?product_id=71
And this is the all glass stem you guys are talking about?
http://www.epicvape.com/accessories_vaporizer_wood_custom_aromatherapy_botanicals_herbal/glass wand
As a side note.. there was some mention of getting the silicone piece.. is it the same one sold on the site?
Thanks.