Reflections
Well-Known Member
I use beeswax, just put in like 6 little pellets in cup and 6 drops of oil. Works great and smells amazing. Plus when done the wax hardens making storage of the cup easier.
E-Nano from Epickai
After about 4-5 months of use my Epicvape cracked in half. It was very weird how it happened. Almost as if one minute I was using it staring at it on my desk and then when I went back to pick it up noticed the crack running right down the entire unit. Was sooooo bummed about it. Really love the thing. Just want to know how I go about sending it back.
Reflections
Well-Known Member
unsorted
Well-Known Member
@Spocks_Katra I though about you today!
Where you in another Galaxy yesterday?
I saw the Star Trek Crew however you weren't there?
This is how I got there!
Didn't take long!
I'm curious about that overfilled stem.......Do you use some sort of extension piece to connect the nano?
ataxian
PALE BLUE DOT
What are you referring too?
I like my GonG's fuller than most?
Cultural I guess?
The NANO has the best heater for my liking.
ASH COLLECTER'S and SHERLOCK'S are my favorite actually.
I use different stuff to have fun while I medicate.
MARY POPPIN'S sang, "A TEA SPOON OF SUGAR MAKES THE MEDICINE GO DOWN"!
unsorted
Well-Known Member
With the gong bowl filled there's no room for the enano heater stem. What don't I know?
Gray Area
Well-Known Member
Vapor_Eyes
taste buds
If you fill it fluffy the cannabis collapses some when you go to hit it. It's almost like using your heater stem as a tamping tool.
Also, you don't need to fully insert the heater stem for it to work. Sometimes I change the heater distance during a hit, its like adjusting the temperature without using the knob. So for example you could leave the temp on the higher side, but if you want better flavor just barely insert the heater when you hit it.
Sometimes I load really big bowls like @ataxian because it gives massive hits. You can't fully insert the heater but it still works just fine. You'd be surprised how much the cannabis compresses when you start to hit it. Although to be honest, I've never filled one as full as that most recent one, that was literally overflowing from the top.
CarolKing
Singer of songs and a vapor connoisseur
You could also lower the basket on your adjustable GonG or stem to allow for more cannabis. If you feel a restricted draw that usually means too much product in the stem but using @Vapor_Eyes suggesting might solve that problem. A type of hovering over the heater core style of vaporizing.
I never pack my load either, the cannabis needs the air flow. Slow and steady draws will produce pretty awesome vapor and some big clouds. Keeping your screens clean is important to help with air flow.
I never pack my load either, the cannabis needs the air flow. Slow and steady draws will produce pretty awesome vapor and some big clouds. Keeping your screens clean is important to help with air flow.
Last edited:
ataxian
PALE BLUE DOT
@unsorted I'm sorry for being a DICK!
I fill my GonG full (fluff) Medium grind.
It becomes small after the heater smashes it.
1970 when I started smoking (marijuana, pot, CANNABIS) so I don't know much?
Maybe its the FLAVOR that excites me?
The effect OMG!
IKR! (I know right?)
The NANO has the FLAVOR/EFFECT = CIVILIZED
NANO + SATIVA + POP CORN + PERRIER
ataxian
PALE BLUE DOT
OK, I'm ERASABLE!
The NANO I used all day with a little 14mm ash catcher and sherlock.
Then again I was fixed on SHATTER. (0.75gr)
Today I was medicated beyond believe!
Tomorrow I look for more NANO sessions! (only had 8) (OK. light-weight with SD)
SIZE/POWER/FLAVOR = NAnO!
No!
MEDICATED = CIVILIZED
Last edited:
A lifetime.
The Natty Leprechaun
Well-Known Member
I hooked up my Nano to a wemo it is a light/device remote switch/timer that is controlled by an app that I have on my phone so when I want to turn it on I just have go to the app on my phone and hit the button .
so far it seems nice and more convient like just before I get home I can turn it on or if I am out working in the yard I can turn it on or off where ever I like
I wonder if there is a dimmer function if there is you could potentially control the temp of the Nano too and not have to worry about accidently moving the dial up or down
I want to get a new stem something with a curve or a 90 degree turn to it so the vapor has more glass to cool off on and maybe thicker glass too it can be a little warm when I crank up the dial to extract as much as I can before I call it kicked with just the strait stem and I need to have any of my vapes and accessories easily concealable .That is one of the main reasons I chose the Nano so I can't be getting a nice big bubbler/ water bong and I don't want to take anything from the flavor produced so I think I am going to stay with the dry stems for now.
So my question is what is the millimeter size I should be looking for to go over the stem on the Nano would it be a 14 mm female ? Thanks for any advice
so far it seems nice and more convient like just before I get home I can turn it on or if I am out working in the yard I can turn it on or off where ever I like
I wonder if there is a dimmer function if there is you could potentially control the temp of the Nano too and not have to worry about accidently moving the dial up or down
I want to get a new stem something with a curve or a 90 degree turn to it so the vapor has more glass to cool off on and maybe thicker glass too it can be a little warm when I crank up the dial to extract as much as I can before I call it kicked with just the strait stem and I need to have any of my vapes and accessories easily concealable .That is one of the main reasons I chose the Nano so I can't be getting a nice big bubbler/ water bong and I don't want to take anything from the flavor produced so I think I am going to stay with the dry stems for now.
So my question is what is the millimeter size I should be looking for to go over the stem on the Nano would it be a 14 mm female ? Thanks for any advice
Last edited:
justvapin
Enthusiastic Cannabis Consumer
Generally best to use one of the gongs sold by epic, and mate it to either a 14 or 18mm female piece of your choice.....
TeeJay1952
Well-Known Member
Yo Natty More Glass, More to clean and collect what is rightfully yours. It is a trade off. Cooler Vapor vs Less Potency. If it is on the glass into your system it did not pass. 
The Natty Leprechaun
Well-Known Member
Thanks for reminding me about the cleaning part I will keep that in mind when picking a new pieceYo Natty More Glass, More to clean and collect what is rightfully yours. It is a trade off. Cooler Vapor vs Less Potency. If it is on the glass into your system it did not pass.
When it comes to what is rightfully mine I waste nothing and the strait stem seems very easy to clean the reclaim to be used up in the Nano or my ff2 or how ever else
@justvapin
Thanks I am trying to get one solid piece easy on easy off the stem. How well do the gongs stay connected to whatever piece it is connected to? I am sure some pieces marry up better than others .I am considering some of the pieces from Joda glassworks but wanted to check out all my options first
Vapor_Eyes
taste buds
It sounds to me like you want a j-hook. You can get them cheap from China on DHgate. You would need a 14mm or 18mm gong depending on the j-hook.
If you want it all in one piece you will have to get something custom. @VaPeD&CoNfUsEd could help with that, perhaps even @Oregonglassblower .
One note about an all in one piece: it will make it harder to remove the screen for cleaning. With a gong you can just push the screen out. Because of the shape of a j-hook you would need to pull the screen out. Also, it will limit you to using the j-hook with the nano only. With a 14mm or 18mm joint you could use it with any vape with a water adapter.
mrfloopa
Vappy
I have been absolutely loving my nano over the past few months. The thing is the cadillac of log vapes! I wasn't sure at first if it was worth being a bit pricier compared to others, but if you want something that looks good and feels good, it's the e-nano. I can only imagine how unique and crazy they'll get with inlays.
However, I was sad yesterday to find that after I let it preheat (on 7.5), I returned to find it with a crack from the metal all the way down to the power adapter! When I finished the session and tried to unplug it it pulled out the entire female end from inside the unit! I emailed yesterday with pictures, and put in an RMA request. Such a shame that such a beautiful product had something like this happen so soon into it's life.
Hopefully I hear back soon and can get this baby all patched up so I can pour more love into her.
However, I was sad yesterday to find that after I let it preheat (on 7.5), I returned to find it with a crack from the metal all the way down to the power adapter! When I finished the session and tried to unplug it it pulled out the entire female end from inside the unit! I emailed yesterday with pictures, and put in an RMA request. Such a shame that such a beautiful product had something like this happen so soon into it's life.
Hopefully I hear back soon and can get this baby all patched up so I can pour more love into her.
CarolKing
Singer of songs and a vapor connoisseur
I would think a one piece J hook would be awkward to use. The Blackleaf j hooks are $19.99 through PlaneVape. I bought 2, the glass is a medium thickness. I've been very happy with mine. I use it with several other vaporizers. If you had a GonG attached you would only be able to use it with the Enano.
@mrfloopa sorry that happened, what a bummer. I'm sure Andy will get you fixed up.
@mrfloopa sorry that happened, what a bummer. I'm sure Andy will get you fixed up.
ataxian
PALE BLUE DOT
I'm a cheap MF!
JHOOK'S make good mouth-pieces.
I use a JHOOK (SHERLOCK) with most vaporizers.
$20 set up? 14mm this one. I will set-up a 18mm later today.
Last edited:
CarolKing
Singer of songs and a vapor connoisseur
This is what another FCer has for his log vape. This isn't a Nano and he has a GonG that's not attached. This is @NickDlow's setup. Give him a PM. I hope it was OK to put this here. We had been talking about a one piece J hook. This isn't exactly that though.
My Sherlock is carbed so it's a one hand vaping operation. Assembly requires two hands.
My Sherlock is carbed so it's a one hand vaping operation. Assembly requires two hands.
Last edited:
ataxian
PALE BLUE DOT
This was not has nice as a HEADY.This is what another FCer has for his log vape. This isn't a Nano and he has a GonG that's not attached. This is @NickDlow's setup. Give him a PM. I hope it was OK to put this here. We had been talking about a one piece J hook. This isn't exactly that though.
My Sherlock is carbed so it's a one hand vaping operation. Assembly requires two hands.
However I got medicated anyway!
hafalump
Well-Known Member
Just recieved my tracking info. My unit had the plug come loose.
I sent it out Monday, today is Thursday. Nice customer service.
Thanks @ACE OF VAPE
I sent it out Monday, today is Thursday. Nice customer service.
Thanks @ACE OF VAPE